iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty!
CEN

EN 12259-14:2020/prA1

(Amendment)

Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications

Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications

This document specifies requirements for the construction and performance of residential sprinklers as well as test methods for their type approval, which are operated by a change of state of an element or bursting of a glass bulb under the influence of heat and incorporating the following types of water seals:
-   conical metal spring with a PTFE gasket or coating;
-   metal cap or disc with PTFE gasket or coating;
-   copper gasket, with or without a PTFE coating.
Sprinklers in accordance with this document will only be used in automatic sprinkler systems for domestic and residential applications as defined in EN 16925.

Ortsfeste Brandbekämpfungsanlagen - Bauteile für Sprinkler- und Sprühwasseranlagen - Teil 14: Sprinkler für die Anwendung im Wohnbereich

Installations fixes de lutte contre l'incendie - Composants des systèmes d'extinction du type sprinkleur et à pulvérisation d'eau - Partie 14: Sprinkleurs pour applications résidentielles

No scope available

Vgrajene naprave za gašenje - Sestavni deli sprinklerskih sistemov in sistemov s pršečo vodo - 14. del: Sprinklerji za uporabo v stanovanjih

General Information

Status
Not Published
ICS
13.220.20 - Fire protection
Technical Committee
CEN/TC 191 - Fixed firefighting systems
Drafting Committee
CEN/TC 191/WG 5 - Sprinkler systems
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Due Date
22-Sep-2021
Completion Date
22-Sep-2021
Ref Project
SIST EN 12259-14:2020/oprA1:2021 - Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications

RELATIONS

Amends
EN 12259-14:2020 - Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications
Effective Date
04-Nov-2020

Buy Standard

EN 12259-14:2020/oprA1:2021EN 12259-14:2020/oprA1:2021
PreviousNext
Amendment
EN 12259-14:2020/oprA1:2021
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 12259-14:2020/oprA1:2021
01-maj-2021
Vgrajene naprave za gašenje - Sestavni deli sprinklerskih sistemov in sistemov s
pršečo vodo - 14. del: Sprinklerji za uporabo v stanovanjih

Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14:

Sprinklers for residential applications

Ortsfeste Brandbekämpfungsanlagen - Bauteile für Sprinkler- und Sprühwasseranlagen -

Teil 14: Sprinkler für die Anwendung im Wohnbereich

Installations fixes de lutte contre l'incendie - Composants des systèmes d'extinction du

type sprinkleur et à pulvérisation d'eau - Partie 14: Sprinkleurs pour applications

résidentielles
Ta slovenski standard je istoveten z: EN 12259-14:2020/prA1
ICS:
13.220.10 Gašenje požara Fire-fighting
SIST EN 12259-14:2020/oprA1:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12259-14:2020/oprA1:2021
---------------------- Page: 2 ----------------------
SIST EN 12259-14:2020/oprA1:2021
DRAFT
EUROPEAN STANDARD
EN 12259-14:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
March 2021
ICS 13.220.20
English Version
Fixed firefighting systems - Components for sprinkler and
water spray systems - Part 14: Sprinklers for residential
applications

Installations fixes de lutte contre l'incendie - Ortsfeste Brandbekämpfungsanlagen - Bauteile für

Composants des systèmes d'extinction du type Sprinkler- und Sprühwasseranlagen - Teil 14: Sprinkler

sprinkleur et à pulvérisation d'eau - Partie 14: für die Anwendung im Wohnbereich

Sprinkleurs pour applications résidentielles

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 191.

This draft amendment A1, if approved, will modify the European Standard EN 12259-14:2020. If this draft becomes an

amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALIS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14972-8:2020(Main)
Fixed firefighting systems - Water mist systems - Part 8- Test protocol for machinery in enclosures exceeding 260 m³ for open nozzle systems
SIST EN 14972-8:2020

This document specifies fire testing requirements for water mist systems used for fire protection of machinery in enclosures with volumes exceeding 260 m³.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12259-14:2020(Main)
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 14: Sprinklers for residential applications
SIST EN 12259-14:2020

This document specifies requirements for the construction and performance of residential sprinklers as well as test methods for their type approval, which are operated by a change of state of an element or bursting of a glass bulb under the influence of heat, for use only in automatic sprinkler systems for domestic and residential applications as defined in EN 16925:− .
This standard does not cover representative fire and other tests for special sprinklers that are intended to provide for specific fire hazards, nor does it cover fire and other tests for sprinklers for commercial and industrial sprinkler systems as in EN 12845. Those test requirements are covered by EN 12259-1.
NOTE 1   All pressure data in this European Standard are given as gauge pressures in bar.
NOTE 2    Sprinklers according to EN12259-1 can also be used in residential and domestic applications if the system is designed according to EN 12845.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14972-9:2020(Main)
Fixed firefighting systems - Water mist systems - Part 9: Test protocol for machinery in enclosures not exceeding 260 m³ for open nozzle systems
SIST EN 14972-9:2020

This document specifies fire testing requirements for water mist systems used for fire protection of machinery in enclosures with volumes not exceeding 260 m³.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12845:2015+A1:2019(Main)
Fixed firefighting systems - Automatic sprinkler systems - Design, installation and maintenance
SIST EN 12845:2015+A1:2020

This European Standard specifies requirements and gives recommendations for the design, installation and maintenance of fixed fire sprinkler systems in buildings and industrial plants, and particular requirements for sprinkler systems that are integral to measures for the protection of life.
This European Standard covers only the types of sprinkler specified in EN 12259 1 (see Annex L).
The requirements and recommendations of this European Standard are also applicable to any addition, extension, repair or other modification to a sprinkler system. They are not applicable to water spray or deluge systems.
It covers the classification of hazards, provision of water supplies, components to be used, installation and testing of the system, maintenance, and the extension of existing systems, and identifies construction details of buildings which are the minimum necessary for satisfactory performance of sprinkler systems complying with this European Standard.
This European Standard does not cover water supplies to systems other than sprinklers. Its requirements can be used as guidance for other fixed firefighting extinguishing systems, provided that any specific requirements for other firefighting extinguishing supplies are taken into account.
This European Standard is intended for use by those concerned with purchasing, designing, installing, testing, inspecting, approving, operating and maintaining automatic sprinkler systems, in order that such equipment will function as intended throughout its life.
This European Standard is intended only for fixed fire sprinkler systems in buildings and other premises on land. Although the general principles might well apply to other uses (e.g. maritime use). For these other uses additional considerations should be taken into account.
The requirements are not valid for automatic sprinkler systems on ships, in aircraft, on vehicles and mobile fire appliances or for below ground systems in the mining industry.
Sprinkler system design deviations might be allowed when such deviations have been shown to provide a level of protection at least equivalent to this European Standard, for example by means of full-scale fire testing where appropriate, and where the design criteria have been fully documented.

  • Standard
    215 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14972-16:2019(Main)
Fixed firefighting systems - Water mist systems - Part 16: Test protocol for industrial oil cookers for open nozzle systems
SIST EN 14972-16:2019

This document specifies fire testing requirements for water mist systems used for fire protection of industrial oil cookers. This does not include requirements for systems used for protection of other equipment such as exhaust air ducts, heaters, heat exchangers, and food processing and food preparation areas.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13565-1:2019(Main)
Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
SIST EN 13565-1:2019

The requirements of this document set out the materials, construction, and performance of components intended for use in fixed foam fire fighting systems, and using foam concentrates conforming to EN 1568-1 to EN 1568-4. The components covered are: proportioners, sprayers, semi-subsurface hose units, branchpipes, low/medium expansion foam generators, high expansion foam generators, foam chambers, tanks and pressure vessels. Methods of test are given in Annex A to Annex K.
Requirements are also given for the provision of the characteristic data needed for correct application of components.
NOTE 1   Unless otherwise stated pressures are gauge pressures expressed in bar.
The requirements of this document do not cover, except where stated, the use of combinations of components to form part, or the whole, of a fire fighting system.
NOTE 2   Components conforming to this document are not necessarily compatible one with another.
Requirements for pumps, motors and the functioning of mechanical components (i.e. remote control turrets) are outside the scope of this document.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12259-9:2019(Main)
Fixed firefighting systems - Components for sprinkler and water spray systems - Part 9: Deluge alarm valves
SIST EN 12259-9:2019

This part of EN 12259 specifies requirements, test methods, evaluation of conformity and marking of deluge
alarm valves with a nominal size range DN40 to DN250 intended to be used in fire protection water spray
systems.
This European Standard does not cover elastomeric sleeve type valves and does not include rules for design,
installation and maintenance of fire protection water spray systems.
Auxiliary components and attachments to deluge alarm valves are not covered by this part of EN 12259 with the
exception of automatic drain valves.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13565-2:2018+AC:2019(Main)
Fixed firefighting systems - Foam systems - Part 2: Design, construction and maintenance
SIST EN 13565-2:2018+AC:2019

This document specifies the requirements and describes the methods for design, installation, testing and maintenance of low, medium, and high expansion foam fire extinguishing systems.
Foam systems may be used to suppress the release of toxic vapours but this application is outside the scope of this document.
This document provides guidance for the design of various foam systems available to persons with knowledge and experience in determining the selection of foam fire extinguishing systems which will be effective in protecting specific hazard configurations. For the application of this standard, a risk assessment by a qualified and experienced person should be performed for both new and existing systems, however the risk assessment is outside the scope of this document.
This document does not cover a risk analysis carried out by a competent person.
Nothing in this document is intended to restrict new technologies or alternative arrangements, provided that the level of foam system performance prescribed in this standard is not lowered, and supported by documented evidence/test reports.
All foam systems are generally unsuitable for the following:
-   chemicals, such as cellulose nitrate, that release sufficient oxygen or other oxidizing agents which can sustain combustion;
-   energized unenclosed electrical equipment;
-   metals such as sodium, potassium and sodium-potassium alloys which are reactive to water;
-   hazardous, water-reactive materials such as triethyl-aluminium and phosphorous pentoxide;
-   combustible metals such as aluminium and magnesium.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15276-1:2019(Main)
Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components
SIST EN 15276-1:2019

This document specifies requirements and test methods for condensed aerosol extinguishing system components.
This document covers the use of condensed aerosol extinguishing systems for total flooding applications.
This document in not applicable to explosion suppression applications.
This document does not cover all legislative requirements. In certain countries specific national regulations apply and take precedence over this document. Users of this document are advised to inform themselves of the applicability or non-applicability for this document by their national responsible authorities.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15276-2:2019(Main)
Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2: Design, installation and maintenance
SIST EN 15276-2:2019

This document specifies requirements and methods for the design, installation and maintenance of condensed aerosol extinguishing systems and the characteristics of the extinguishing media and types of fire for which it is a suitable extinguishing medium.
This document covers the use of condensed aerosol extinguishing systems for total flooding applications.
This document is not applicable to explosion suppression applications.
This document does not cover all legislative requirements. In certain countries specific national regulations apply and take precedence over this document. Users of this document are advised to inform themselves of the applicability or non-applicability for this document by their national responsible authorities.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day