Shower trays for domestic purposes

This European Standard specifies requirements, test methods and procedures for evaluation of conformity for shower trays used for domestic purposes which ensure that the product, when installed, used and maintained in accordance with the manufacturer's instructions, will satisfy cleanability and durability !deleted text" when used for personal hygiene.
This standard is applicable to all sizes and shapes of shower trays.
This standard does not cover shower trays for use with medical provisions.
NOTE 1   For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings.
NOTE 2   Annex A lists characteristics of materials commonly used for manufacturing shower trays.

Duschwannen für den Hausgebrauch

Diese Europäische Norm legt Anforderungen, Prüfverfahren sowie Verfahren zur Bewertung der Konformität für Duschwannen für den Hausgebrauch fest, die sicherstellen, dass das in Übereinstimmung mit den Herstelleranweisungen eingebaute, genutzte und gepflegte Produkt für die Nutzung zur persönlichen Hygiene eine zufrieden stellende Reinigbarkeit und !Dauerhaftigkeit" aufweist.
Diese Norm ist auf alle Größen und Formen von Duschwannen anwendbar.
Diese Norm gilt nicht für Duschwannen für spezielle medizinische Anwendungen.
ANMERKUNG 1   Der Begriff „für den Hausgebrauch“ in dieser Norm schließt die Verwendung in Hotels, Studentenwohnheimen, Krankenhäusern und ähnlichen Einrichtungen ein.
ANMERKUNG 2   Anhang A führt Eigenschaften von Werkstoffen auf, die üblicherweise für die Herstellung von Duschwannen eingesetzt werden.

Receveurs de douche à usage domestique

La présente Norme européenne spécifie les prescriptions, méthodes d’essai et modes opératoires d’évaluation de la conformité des receveurs de douche à usage domestique, visant à garantir que le produit, s’il est installé, utilisé et entretenu selon les instructions du fabricant, présente les qualités requises !texte supprimé", dans le cadre d’une utilisation d’hygiène personnelle.
La présente norme s’applique à toutes les tailles et formes de receveurs de douche.
La présente norme ne traite pas des receveurs de douche utilisés dans le cadre de soins médicaux.
NOTE 1   Pour les besoins de la présente norme, le terme «à usage domestique» inclut l’utilisation en hôtels, en logements pour étudiants, en hôpitaux et autres bâtiments similaires.
NOTE 2   L’Annexe A donne les caractéristiques des matériaux couramment utilisés pour la fabrication des receveurs de douche.

Kadi za prhanje za domačo uporabo

Ta evropski standard določa zahteve, preskusne metode in postopke za ocenjevanje skladnosti kadi za prhanje za domačo uporabo in osebno higieno, ki zagotavljajo, da bo proizvod, nameščen in vzdrževan v skladu z navodili proizvajalca, izpolnjeval zahteve po zmožnosti čiščenja in trajnosti pri uporabi za osebno higieno. Ta standard velja za vse velikosti in oblike kadi za prhanje.

General Information

Status
Withdrawn
Publication Date
20-Jul-2010
Withdrawal Date
28-Jun-2016
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
29-Jun-2016

Relations

Effective Date
18-Jan-2023
Effective Date
28-Jan-2015

Buy Standard

Standard
EN 14527:2006+A1:2010
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Duschwannen für den HausgebrauchReceveurs de douche à usage domestiqueShower trays for domestic purposes91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 14527:2006+A1:2010SIST EN 14527:2006+A1:2010en,fr,de01-oktober-2010SIST EN 14527:2006+A1:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14527:2006+A1
July 2010 ICS 91.140.70 Supersedes EN 14527:2006English Version
Shower trays for domestic purposes
Receveurs de douche à usage domestique
Duschwannen für den Hausgebrauch This European Standard was approved by CEN on 14 December 2005 and includes Amendment 1 approved by CEN on 19 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14527:2006+A1:2010: ESIST EN 14527:2006+A1:2010

Materials . 15Annex B (informative)
Surface of shower trays . 17Annex ZA (informative)
!!!!Clauses of this European Standard addressing the provisions of the EU Construction Products Directive"""" . 18Bibliography . 23 SIST EN 14527:2006+A1:2010

Staining agents Methylene blue, 1 % m/m a The above specified bleach may be replaced by sodium percarbonate (2Na2CO3 · 3H2O2) prepared as follows: Dissolve 1 g of a commercial available powdery bleach based on sodium percarbonate containing 15 % to 30 % of the active component in 100 ml de-ionised water at room temperature.
5.3.3.2 Particular requirements for shower trays made of enamelled steel and enamelled cast iron Shower trays made from enamelled steel and enamelled cast iron shall comply with the requirements given in Table 2. Table 2 — Requirements for shower trays made of enamelled steel and enamelled cast iron Requirement Parameter Test method Resistance to boiling water < 10 g/m2 ISO 2744 Resistance to cold citric acid Class 2 ISO 2722 Resistance to boiling citric acid < 5 g/m² ISO 2742 Resistance to cold sulphuric acid Class 2 EN 14483-1 Resistance to alkali solutions < 8 g/m² Test apparatus according to ISO 2742 Test solution according to ISO 4533 Duration of test: 2,5 h
5.3.4 Resistance to temperature changes When tested in accordance with !8.3", all shower trays shall show no evidence of distortion or other defects, e.g. crazing, which will impair their cleanability. Experience has shown that shower trays manufactured from the stainless steel grades listed in annex A, enamelled steel, enamelled cast iron and glazed ceramics comply with this requirement. !deleted text" SIST EN 14527:2006+A1:2010

! 6 Requirements for class 2 products 6.1 General The manufacturer shall provide instructions with each shower tray covering installation and care. NOTE Annex B gives advice which manufacturers can include in their instructions. 6.2 Cleanability 6.2.1 Appearance of surface When a shower tray is inspected under strong and oblique illumination, the surfaces intended to come into contact with water shall be visibly smooth, non-absorbent and free from inaccessible corners that would impair the cleanability.
NOTE Surfaces with cracks, chips, crazing and other similar defects are not considered to be smooth. 6.2.2 Drainage of water Shower trays shall have at least one waste outlet hole. The dimensions of the waste outlet hole shall comply with the requirements of EN 251. Other dimensions are permissible, if the manufacturer provides or recommends a suitable waste fitting. All water shall empty from the shower tray unless prevented by surface tension. 6.3 Durability 6.3.1 General Shower trays shall be readily cleanable for their anticipated working life when normal cleaning and maintenance is carried out. 6.3.2 Materials Experience has shown that shower trays made from plastics materials, enamelled steel, enamelled cast iron, stainless steel, glazed ceramics or glass and their surfaces intended to come into contact with water have the properties described in 6.3.1." ! 7 Dangerous
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.