CEN ISO/TR 52022-2:2017

Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification (ISO/TR 52022-2:2017)

ISO/TR 52022-2:2017 contains information to support the correct understanding and use of ISO 10077‑1, ISO 10077‑2, ISO 12631, ISO 52022‑1 and ISO 52022‑3.
This technical report does not contain any normative provision.

Energieeffizienz von Gebäuden - Wärmetechnische, solare und tageslichtbezogene Eigenschaften von Bauteilen und Bauelementen - Teil 2: Erklärung und Begründung (ISO/TR 52022-2:2017)

Dieser Technische Bericht bezieht sich auf die Normen ISO 10077 1, ISO 10077 2, ISO 12631, ISO 52022 1 und ISO 52022 3.
Er enthält Informationen für das korrekte Verständnis und die ordnungsgemäße Anwendung dieser Normen.
Dieser Technische Bericht enthält keine normativen Vorschriften.

Performance énergétique des bâtiments - Propriétés thermiques, solaires et lumineuses des composants et éléments du bâtiment - Partie 2: Explication et justification (ISO/TR 52022-2:2017)

L'ISO/TR 52022-2:2017 contient des informations permettant d'assurer la compréhension et l'utilisation correctes des normes ISO 10077‑1, ISO 10077‑2, ISO 12631, ISO 52022‑1 et ISO 52022‑3.
Le présent Rapport technique ne contient aucune disposition normative.

Energetska učinkovitost stavb - Lastnosti gradbenih komponent in elementov glede toplote, sončnega obsevanja in dnevne svetlobe - 2. del: Obrazložitev in utemeljitev (ISO/TR 52022-2:2017)

To novo tehnično poročilo se sklicuje na skupino standardov EN ISO 10077-1, EN ISO 10077-2, EN ISO 12631, EN ISO 52022-X (na podlagi revizije standardov EN 13363-1 in EN ISO 52022-X (na podlagi revizije standarda EN 13363-2)) za toplotno učinkovitost oken, vrat in polken – Lastnosti oken, okvirjev in fasad glede toplote, sončnega obsevanja ter dnevne svetlobe – Računske metode. Vsebuje informacije za podporo pravilnega razumevanja, uporabe in nacionalne prilagoditve teh standardov. To tehnično poročilo ne vsebuje nobenih normativnih določb.

General Information

• Status: Published
• Publication Date: 18-Jul-2017
• ICS: 91.120.10 - Thermal insulation of buildings
• Technical Committee: CEN/TC 89 - Thermal performance of buildings and building components
• Drafting Committee: CEN/TC 89/WG 7 - Thermal properties of doors and windows
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Jul-2017
• Due Date: 11-Mar-2016
• Completion Date: 19-Jul-2017
• Directive: 2010/31/EU - Directive 2010/31/eu of the European Parliament and of the Council of 19 May 2010 on the energy performance of buildings (recast)
• Mandate: M/480 - Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and promoting the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance buildings (2010/31/EU)
• Ref Project: SIST-TP CEN ISO/TR 52022-2:2017 - Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 2: Explanation and justification (ISO/TR 52022-2:2017)

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2017
(QHUJHWVNDXþLQNRYLWRVWVWDYE/DVWQRVWLJUDGEHQLKNRPSRQHQWLQHOHPHQWRY
JOHGHWRSORWHVRQþQHJDREVHYDQMDLQGQHYQHVYHWOREHGHO2EUD]ORåLWHYLQ
XWHPHOMLWHY,6275
Energy performance of buildings - Thermal, solar and daylight properties of building
components and elements - Part 2: Explanation and justification (ISO/TR 52022-2:2017)
Energieeffizienz von Gebäuden - Wärmetechnische, solare und tageslichtbezogene
Eigenschaften von Bauteilen und Bauelementen - Teil 2: Erklärung und Begründung
(ISO/TR 52022-2:2017)
Performance énergétique des bâtiments - Propriétés thermiques, solaires et lumineuses
des composants et éléments du bâtiment - Partie 2: Explication et justification (ISO/TR
52022-2:2017)
Ta slovenski standard je istoveten z: CEN ISO/TR 52022-2:2017
ICS:
27.015 (QHUJLMVNDXþLQNRYLWRVW Energy efficiency. Energy
2KUDQMDQMHHQHUJLMHQD conservation in general
VSORãQR
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN ISO/TR 52022-2
TECHNICAL REPORT
RAPPORT TECHNIQUE
July 2017
TECHNISCHER BERICHT
ICS 91.120.10
English Version
Energy performance of buildings - Thermal, solar and
daylight properties of building components and elements -
Part 2: Explanation and justification (ISO/TR 52022-
2:2017)
Performance énergétique des bâtiments - Propriétés Energieeffizienz von Gebäuden - Wärmetechnische,
thermiques, solaires et lumineuses des composants et solare und tageslichtbezogene Eigenschaften von
éléments du bâtiment - Partie 2: Explication et Bauteilen und Bauelementen - Teil 2: Erklärung und
justification (ISO/TR 52022-2:2017) Begründung (ISO/TR 52022-2:2017)

This Technical Report was approved by CEN on 24 February 2017. It has been drawn up by the Technical Committee CEN/TC 89.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 52022-2:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
European foreword
This document (CEN ISO/TR 52022-2:2017) has been prepared by Technical Committee ISO/TC 163
"Thermal performance and energy use in the built environment" in collaboration with Technical
Committee CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of
which is held by SIS.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
This document is part of the set of standards on the energy performance of buildings (the set of EPB
standards) and has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association (Mandate M/480, see reference [EF1] below), and supports essential
requirements of EU Directive 2010/31/EC on the energy performance of buildings (EPBD, [EF2]).
In case this standard is used in the context of national or regional legal requirements, mandatory
choices may be given at national or regional level for such specific applications, in particular for the
application within the context of EU Directives transposed into national legal requirements.
Further target groups are users of the voluntary common European Union certification scheme for the
energy performance of non-residential buildings (EPBD art.11.9) and any other regional (e.g. Pan
European) parties wanting to motivate their assumptions by classifying the building energy
performance for a dedicated building stock.
References:
[EF1] Mandate M480, Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of
standards for a methodology calculating the integrated energy performance of buildings and promoting
the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the
energy performance of buildings (2010/31/EU) of 14th December 2010
[EF2] EPBD, Recast of the Directive on the energy performance of buildings (2010/31/EU) of 14th
December 2010
Endorsement notice
The text of ISO/TR 52022-2:2017 has been approved by CEN as CEN ISO/TR 52022-2:2017 without any
modification.
TECHNICAL ISO/TR
REPORT 52022-2
First edition
2017-06
Energy performance of buildings —
Thermal, solar and daylight properties
of building components and
elements —
Part 2:
Explanation and justification
Performance énergétique des bâtiments — Propriétés thermiques,
solaires et lumineuses des composants et éléments du bâtiment —
Partie 2: Explication et justification
Reference number
ISO/TR 52022-2:2017(E)
©
ISO 2017
ISO/TR 52022-2:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

ISO/TR 52022-2:2017(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and subscripts . 2
5 Brief description of the methods . 2
5.1 Outputs of the method. 2
5.2 General description of the methods . 2
6 ISO 10077-1 Thermal performance of windows, doors and shutters – Calculation of
thermal transmittance – Part 1: General . 2
6.1 General . 2
6.2 Thermal transmittance of the glazing . 3
6.3 Additional thermal resistance of windows with closed shutters . 3
7 ISO 10077-2 Thermal performance of windows, doors and shutters – Calculation of
thermal transmittance – Part 2: Numerical method for frames.3
7.1 General . 3
7.2 Calculation principle . 3
8 ISO 12631 Thermal performance of curtain walling – Calculation of
thermal transmittance . 4
8.1 General . 4
8.2 Calculation examples . 4
9 ISO 52022-1 Energy performance of buildings — Thermal, solar and daylight
properties of building components and elements — Part 1: Simplified calculation
method of the solar and daylight characteristics for solar protection devices
combined with glazing . 4
9.1 General . 4
9.2 Data for typical glazing and solar protection devices . 5
9.3 Solar transmittance of solar protection devices . 5
9.4 Calculation example. 5
10 ISO 52022-3 Energy performance of buildings — Thermal, solar and daylight
properties of building components and elements — Part 3: Detailed calculation
method of the solar and daylight characteristics for solar protection devices
combined with glazing . 6
10.1 General . 6
10.2 Equivalent solar and light optical characteristics for louvres or venetian blinds . 6
10.3 Calculation example. 6
Annex A (informative) ISO 10077-1: Thermal transmittance of double and triple glazing .7
Annex B (informative) ISO 10077-1: Additional thermal resistance for windows with
closed shutters . . 9
Annex C (informative) ISO 12631: Component method: Calculation example .12
Annex D (informative) ISO 12631: Single assessment method: Calculation example .17
Annex E (informative) ISO 52022-1: Data for typical glazing and solar protection devices .20
Annex F (informative) ISO 52022-1: Example of calculation of a solar protection device in
combination with glazing .21
Annex G (informative) Extended methodology for the determination of equivalent solar
and light optical characteristics for louvres or venetian blinds .23
ISO/TR 52022-2:2017(E)
Annex H (informative) ISO 52022-3: Calculation example .45
Bibliography .
...