EN 13892-4:2002

Methods of test for screed materials - Part 4: Determination of wear resistance-BCA

This European Standard specifies a method for determining the wear resistance of test specimens made from cementitious- or synthetic resin screed material or optionally for other screed materials. The method is also suitable for floor screeds.

Prüfverfahren für Estrichmörtel - Teil 4: Bestimmung des Verschleißwiderstands nach BCA

Méthodes d'essai des matériaux pour chapes - Partie 4: Détermination de la résistance à l'usure BCA

La présente Norme européenne spécifie une méthode de détermination de la résistance à l'usure d'éprouvette d'essai faite à partir de matériaux pour chapes à base de ciment ou de résine synthétique ou, facultativement, à base d'autres matériaux pour chapes. La méthode convient également pour les éprouvettes de mortiers durci découpées dans une chape.

Metode preskušanja za mešanice za estrih – 4. del: Določevanje obstojnosti proti obrabi BCA

General Information

• Status: Published
• Publication Date: 19-Nov-2002
• Withdrawal Date: 30-May-2003
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 303 - Floor screeds and in-situ floorings in buildings
• Drafting Committee: CEN/TC 303/WG 2 - Test methods
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Jan-2024
• Completion Date: 15-Jan-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/132 - Addenda to the mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on circulation fixtures, structural bearings and floorings
• Ref Project: SIST EN 13892-4:2003 - Methods of test for screed materials - Part 4: Determination of wear resistance-BCA

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prüfverfahren für Estrichmörtel - Teil 4: Bestimmung des Verschleißwiderstands nach BCAMéthodes d'essai des matériaux pour chapes - Partie 4: Détermination de la résistance a l'usure BCAMethods of test for screed materials - Part 4: Determination of wear resistance-BCA91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 13892-4:2002SIST EN 13892-4:2003en01-september-2003SIST EN 13892-4:2003SLOVENSKI
STANDARD



SIST EN 13892-4:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13892-4November 2002ICS 91.100.10English versionMethods of test for screed materials - Part 4: Determination ofwear resistance-BCAMéthodes d'essais des matériaux pour chapes - Partie 4:Détermination de la résistance à l'usure BCAPrüfverfahren für Estrichmörtel - Teil 4: Bestimmung desVerschleißwiderstands nach BCAThis European Standard was approved by CEN on 9 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13892-4:2002 ESIST EN 13892-4:2003



EN 13892-4:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Symbols.45Apparatus.45.1BCA abrasion test machine.45.2Marking out template.55.3Depth gauge.56Preparation of specimens.67Procedure.67.1Depth gauge.67.2Setting up.67.3Test operation.68Test report.7SIST EN 13892-4:2003



EN 13892-4:2002 (E)3ForewordThis document (EN 13892-4:2002) has been prepared by Technical Committee CEN/TC 303, "Floor screeds andin-situ floorings in buildings", the secretariat of which is held by DIN.It was prepared by Working Group 2 “Screed materials and floor screeds – Test methods” taking in
...