prEN 17388-2

Flexible sheets for waterproofing - Environmental product declarations - Product Category Rules for reinforced bitumen, plastic and rubber flexible sheets for roof waterproofing - Part 2: Cradle to gate with options, modules C1-C4 and module D

This document provides product category rules (PCR) for the assessment of the environmental performance of reinforced bitumen, plastic and rubber flexible sheets for which the intended use is roof waterproofing.
NOTE   The reference product standards are EN 13707 and EN 13956.
This document is intended to be used for the development and issue of a cradle to gate with options, modules C1-C4 and module D EPD using specific data. This PCR includes requirements and rules to:
-   define the indicators to be declared and the way in which they are collected and reported;
-   describe which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
-   include the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment underlying an EPD, including the specification of the quality of the applied data.

Abdichtungsbahnen - Umweltproduktdeklaration - Produktkategorieregeln für Bitumenbahnen und synthetische Abdichtungsbahnen für die Abdichtung von Dächern - Teil 2: Von der Wiege bis zum Werktor mit Optionen, Module C1-C4 und Modul D

Dieses Dokument stellt Produktkategorieregeln (PCR) zur Bewertung der umweltbezogenen Qualität von Bitumenbahnen und synthetischen Abdichtungsbahnen (Kunststoff- und Elastomerbahnen) bereit, deren bestimmungsgemäße Verwendung die Dachabdichtung ist.
ANMERKUNG   Bei den Bezugs-Produktnormen handelt es sich um EN 13707 und EN 13956.
Dieses Dokument ist für die Entwicklung und Ausstellung einer vollständigen EPD "von der Wiege bis zum Werktor mit Optionen, Module C1-C4 und Modul D" unter Anwendung von spezifischen Daten vorgesehen. Diese PCR enthalten Anforderungen und Regeln zur
-   Festlegung der zu deklarierenden Indikatoren und der Art, in der sie erfasst und angegeben werden;
-   Beschreibung, welche Phasen des Lebenszyklus eines Produkts in der EPD berücksichtigt werden und welche Prozesse in die Lebenszyklusphasen einzubeziehen sind;
-   Einbeziehung der Regeln zur Berechnung der Sachbilanz und Wirkungsabschätzung, die einer EPD zugrunde liegen und die Spezifikation der Qualität der angewandten Daten einschließen.

Feuilles souples d’étanchéité - Déclarations environnementales sur les produits - Règles spécifiques des catégories de produits pour feuilles bitumineuses armées, feuilles plastiques et élastomères pour l’étanchéité de toiture - Partie 2 : Du berceau à la sortie de l’usine avec options, modules C1-C4 et module D

Le présent document fournit des règles de catégories de produits (RCP) pour l’évaluation de la performance environnementale des feuilles souples bitumineuses armées, plastiques et élastomères destinées à être utilisées pour l’étanchéité de toiture.
NOTE   Les normes de produits de référence sont l’EN 13707 et l’EN 13956.
Le présent document est destiné à servir à l’élaboration et la publication d’une DEP du berceau à la sortie de l’usine avec options, modulesC1-C4 et module D, en utilisant des données spécifiques. Ces RCP incluent des exigences et règles qui :
-   définissent les indicateurs à déclarer et la manière dont ils sont recueillis et consignés ;
-   décrivent les étapes du cycle de vie d’un produit prises en compte dans la DEP ainsi que les processus à inclure dans les étapes du cycle de vie ;
-   intègrent les règles de calcul de l’inventaire du cycle de vie et de l’évaluation de l’impact du cycle de vie servant de base à la DEP, y compris la spécification de la qualité des données appliquées.

Hidroizolacijski trakovi - Okoljske deklaracije za proizvode - Pravila za kategorije proizvodov za ojačene bitumenske, polimerne in elastomerne trakove za tesnjenje (streh) - 2. del: Pristop "od zibelke do vrat" z možnostmi (Cradle to gate with options)

General Information

• Status: Not Published
• Publication Date: 11-Apr-2022
• Withdrawal Date: 11-Apr-2022
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 254 - Flexible sheets for water proofing
• Drafting Committee: CEN/TC 254/WG 15 - PCR
• Current Stage: 3098 - Decision to reject - Consensus building
• Completion Date: 22-Apr-2021
• Ref Project: oSIST prEN 17388-2:2019 - Flexible sheets for waterproofing - Environmental product declarations - Product Category Rules for reinforced bitumen, plastic and rubber flexible sheets for (roof) waterproofing - Part 2: Cradle to gate with options

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 17388-2:2019
01-september-2019
Hidroizolacijski trakovi - Okoljske deklaracije za proizvode - Pravila za kategorije
proizvodov za ojačene bitumenske, polimerne in elastomerne trakove za tesnjenje
(streh) - 2. del: Pristop "od zibelke do vrat" z možnostmi (Cradle to gate with
options)
Flexible sheets for waterproofing - Environmental product declarations - Product
Category Rules for reinforced bitumen, plastic and rubber flexible sheets for (roof)
waterproofing - Part 2: Cradle to gate with options
Abdichtungsbahnen - Umweltproduktdeklaration - Produktkategorieregeln für
Bitumenbahnen und synthetische Abdichtungsbahnen für die Abdichtung (von Dächern) -
Teil 2: Von der Wiege bis zur Bahre mit Optionen
Feuilles souples d’étanchéité - Déclarations environnementales sur les produits - Règles
spécifiques des catégories de produits pour feuilles bitumineuses armées, feuilles
plastiques et élastomères pour l’étanchéité (de toiture) - Partie 2 : Du berceau à la sortie
de l’usine avec options
Ta slovenski standard je istoveten z: prEN 17388-2
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
91.060.20 Strehe Roofs
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
oSIST prEN 17388-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17388-2:2019

---------------------- Page: 2 ----------------------
oSIST prEN 17388-2:2019


DRAFT
EUROPEAN STANDARD
prEN 17388-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

May 2019
ICS 91.100.50
English Version

Flexible sheets for waterproofing - Environmental product
declarations - Product Category Rules for reinforced
bitumen, plastic and rubber flexible sheets for (roof)
waterproofing - Part 2: Cradle to gate with options
Feuilles souples d'étanchéité - Déclarations Abdichtungsbahnen - Umweltproduktdeklaration -
environnementales sur les produits - Règles Produktkategorieregeln für Bitumenbahnen und
spécifiques des catégories de produits pour feuilles synthetische Abdichtungsbahnen für die Abdichtung
bitumineuses armées, feuilles plastiques et (von Dächern) - Teil 2: Von der Wiege bis zur Bahre
élastomères pour l'étanchéité (de toiture) - Partie 2 : mit Optionen
Du berceau à la sortie de l'usine avec options
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 254.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17388-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17388-2:2019
prEN 17388-2:2019 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Symbols and abbreviations . 7
5 General aspects . 7
5.1 Objective of the PCR . 7
5.2 Types of EPD with respect to life cycle stages covered . 8
5.3 Comparability of EPD for construction products . 8
5.4 Additional information . 8
5.5 Ownership, responsibility and liability for the EPD . 8
5.6 Communication formats . 8
6 Product Category Rules for LCA . 8
6.1 Product category . 8
6.2 Life cycle stages and information modules to be included . 8
6.2.1 General . 8
6.2.2 A1-A3, product stage, information modules . 8
6.2.3 A4-A5, construction process stage, information modules (optional) . 8
6.2.4 B1-B5, use stage, information modules related to the building fabric (optional) . 8
6.2.5 B6-B7, use stage, information modules related to the operation of the building
(optional) . 9
6.2.6 C1-C4, end of life stage, information modules (optional) . 9
6.2.7 D, benefits and loads beyond the system boundary information module (optional) . 9
6.3 Calculation rules for the LCA . 9
6.3.1 Functional unit . 9
6.3.2 Declared unit . 9
6.3.3 Reference service life (RSL) . 9
6.3.4 System boundaries . 9
6.3.5 Criteria for the exclusion of inputs and outputs (cut-offs) . 11
6.3.6 Selection of data . 11
6.3.7 Data quality requirements . 12
6.3.8 Developing product level scenarios . 12
6.3.9 Units . 14
6.4 Inventory analysis . 14
6.4.1 Collecting data . 14
6.4.2 Calculation procedures . 14
6.4.3 Allocation of input flows and output emissions . 14
6.5 Impact assessment . 14
7 Content of the EPD . 14
7.1 Declaration of general information . 14
7.2 Declaration of environmental parameters derived from LCA . 15
7.2.1 General . 15
7.2.2 Rules for declaring lca information per module . 15
2

---------------------- Page: 4 ----------------------
oSIST prEN 17388-2:2019
prEN 17388-2:2019 (E)
7.2.3 Parameters describing environmental impacts . 15
7.2.4 Parameters describing resource use . 15
7.2.5 Other environmental information describing different waste categories and output
flows . 15
7.3 Scenarios and additional technical information . 15
7.3.1 General . 15
7.3.2 Construction process stage . 15
7.3.3 B1-B7 use stage . 16
7.3.4 End of life . 16
7.4 Additional information on release of dangerous substances to indoor air, soil and
water during the use stage . 16
7.4.1 Indoor air . 16
7.4.2 Soil and water . 16
7.5 Aggregation of information modules . 16
8 Project report . 16
8.1 General . 16
8.2 LCA-related elements of the project report . 16
8.3 Documentation on additional information . 16
8.4 Data availability for verification . 17
9 Verification and validity of an EPD . 17

3

---------------------- Page: 5 ----------------------
oSIST prEN 17388-2:2019
prEN 17388-2:2019 (E)
European foreword
This document (prEN 17388-2:2019) has been prepared by Technical Committee CEN/TC 254 “Flexible
sheets for waterproofing”, the secretariat of which is held by NEN.
This document is currently submitted to the CEN Enquiry.
EN 17388, Flexible sheets for waterproofing - Environmental product declarations - Product Category Rules
for reinforced bitumen, plastic and rubber flexible sheets for (roof) waterproofing consists of the following
parts:
— Part 1: Cradle to grave
— Part 2: Cradle to gate with options
4

---------------------- Page: 6 ----------------------
oSIST prEN 17388-2:2019
prEN 17388-2:2019 (E)
Introduction
CEN TC 254 has decided to provide the Products Category Rules standard in 2 parts. The scope of these
different parts are based on the different types of EPD identified by EN 15804:2012+A1:2013. This is
made to avoid misinterpretation in the market about the EPD scope and content. In the EPD a clear
reference to the applicable part of the standard shall be included.
This standard consists of two parts:
— Part 1: cradle to grave EPD using generic data and generic system specifications or using specific data
and specific system specifications;
— Part 2: cradle to gate with options EPD using specific data and/or specific system specification.
If a new version of EN 15804:2012+A1:2013 is available it might be possible that this standard will be
revised.

5

---------------------- Page: 7 ----------------------
oSIST prEN 17388-2:2019
prEN 17388-2:2019 (E)
1 Scope
This document provides Product Category Rules (PCR) for the assessment of the environmental
performance of reinforced bitumen, plastic and rubber flexible sheets for which the intended use is roof
waterproofing.
NOTE The reference product standards are EN 13707 and EN 13956.
This document is intended to be used for the development and issue of cradle to gate with options EPD
using specific data. This PCR includes requirements/rules to:
— define the parameters to be declared and the way in which they are collected and reported;
— describe which stages of a product’s life cycle are considered in the EPD and which processes are to
be included in the life cycle stages;
— include the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment
underlying an EPD, including the specification of the quality of the applied data.
2 Normative references
The following standards are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 13707, Flexible sheets for waterproofing — Reinforced bitumen sheets for roof waterproofing —
Definitions and characteristics
EN 13956, Flexible sheets for waterproofing — Plastic and rubber sheets for roof waterproofing —
Definitions and characteristics
EN 15804:2012+A1:2013, Sustainability of construction works — Environmental product declarations —
Core rules for the product category of construction products
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at https://www.iso.org/obp
3.1
average data
arithmetic calculated information
3.2
generic data
data for a product or a product family, provided by one or more suppliers without the need for additional
prove of the representatively
6

---------------------- Page: 8 ----------------------
oSIST prEN 17388-2:2019
prEN 17388-2:2019 (E)
3.3
generic EPD
EPD created by the manufacturer or a group of manufacturers (for example industrial sector
associations) for a product or product families, based on generic data which apply to the product or
product family concerned
3.4
product
product with a unique identification code made and marketed for an intended use
3.5
product family
products with similar intended uses, the boundaries of which are defined by the EPD applicant
3.6
roof waterproofing system
waterproofing system used in the roof of a building, including roofs used for parking of vehicles and for
roof gardens
3.7
specific data
data representative for a product or product family, provided by one supplier
3.8
specific EPD
EPD created by the manufacturer for a product or product family, based on specific or generic data which
apply to the product or product family concerned
3.9
waterproofing system
assembly of one or more sheets in its applied and jointed form to prevent the passage of water from one
plane to another, which has certain performance characteristics, to be assessed as a whole
4 Symbols and abbreviations
For the purposes of this document, the symbols and abbreviations given in EN 15804:2012+A1:2013
apply.
5 General aspects
5.1 Objective of the PCR
In addition to EN 15804:2012+A1:2013, 5.1, this document defines the requirements on information,
data and environmental parameters to be included in an Environmental Product Declaration (EPD) for a
cradle to gate with options EPD’s using specific data for:
— roof waterproofing systems with reinforced bitumen flexible sheets for roof waterproofing according
EN 13707;
or
— roof waterproofing systems with plastic and rubber flexible sheets for roof waterproofing according
EN 13956.
7

---------------------- Page: 9 ----------------------
oSIST prEN 17388-2:2019
prEN 17388-2:2019 (E)
5.2 Types of EPD with respect to life cycle stages covered
In addition to EN 15804:2012+A1:2013, the following shall apply.
The LCA based information in an EPD shall cover (see Figure 1 of EN 15804:2012+A1:2013) the life cycle
of a product according to the system boundary (see 6.3.4). In this case, the EPD covers the product stage
and can cover construction process stage, use stage and end of li
...