prEN 2942:2022

Aerospace series - Insert, MJ screw thread, helical coil, self-locking tanged insertion drive, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated

This document specifies the characteristics of self-locking inserts, helical coil tanged insertion drives, MJ screw threads in NI-PH2801 and silver plated inserts for aerospace applications.
The maximum test temperature is 550 °C.

Luft- und Raumfahrt - Draht-Gewindeeinsätze, selbstsichernd, aus hochwarmfester Nickelbasislegierung NI-PH2801 (Inconel X750 - EN 3018), versilbert

Série aérospatiale - Filets rapportés, filetages MJ, à freinage interne, entraînement d'insertion à tenon, en alliage résistant à chaud base nickel NI-PH2801 (Inconel X750), argentés

Le présent document spécifie les caractéristiques des filets rapportés, à freinage interne, à enroulement hélicoïdal, avec entraînement d'insertion à tenon et filetages MJ en NI PH2801, argentés, pour les applications aérospatiales.
Température maximale d'essai : 550 °C.

Aeronavtika - Vložek s spiralnim navojem MJ, samozapiralni, za ročno vstavljanje, iz toplotno odporne zlitine na nikljevi osnovi NI-PH2801 (Inconel X750), posrebreni

General Information

• Status: Not Published
• Publication Date: 27-Aug-2023
• ICS: 49.030.30 - Nuts
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3/S 2 - Fasteners
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 19-May-2022
• Completion Date: 19-May-2022
• Ref Project: oSIST prEN 2942:2022 - Aerospace series - Insert, MJ screw thread, helical coil, self-locking tanged insertion drive, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated

Relations

• Revises: EN 2942:1998 - Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 2942:2022
01-april-2022
Aeronavtika - Vložek s spiralnim navojem MJ, samozapiralni, za ročno vstavljanje,
iz toplotno odporne zlitine na nikljevi osnovi NI-PH2801 (Inconel X750), posrebreni
Aerospace series - Insert, MJ screw thread, helical coil, self-locking tanged insertion
drive, in heat resisting nickel base alloy NI-PH2801 (Inconel X750), silver plated
Luft- und Raumfahrt - Draht-Gewindeeinsätze, selbstsichernd, aus hochwarmfester
Nickelbasislegierung NI-PH2801 (Inconel X750 - EN 3018), versilbert
Série aérospatiale - Filet rapportés, à freinage interne, en alliage résistant à chaud à
base de nickel NI-PH2801 (Inconel X750), argentés
Ta slovenski standard je istoveten z: prEN 2942:2022
ICS:
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
oSIST prEN 2942:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 2942:2022

---------------------- Page: 2 ----------------------
oSIST prEN 2942:2022


DRAFT
EUROPEAN STANDARD
prEN 2942
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2022
ICS Will supersede EN 2942:1998
English Version

Aerospace series - Insert, MJ screw thread, helical coil, self-
locking tanged insertion drive, in heat resisting nickel base
alloy NI-PH2801 (Inconel X750), silver plated
Série aérospatiale - Filet rapportés, à freinage interne, Luft- und Raumfahrt - Draht-Gewindeeinsätze,
en alliage résistant à chaud à base de nickel NI-PH2801 selbstsichernd, aus hochwarmfester
(Inconel X750), argentés Nickelbasislegierung NI-PH2801 (Inconel X750 - EN
3018), versilbert
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 2942:2022:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 2942:2022
prEN 2942:2022 (E)
Contents Page
European Foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Required characteristics . 5
4.1 Configuration — Dimensions — Tolerances — Masses . 5
4.2 Material . 8
4.3 Surface treatment .
...