EN 4701-001:2013

Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 001: Technical specification

This European Standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for EN 4165 rectangular connectors with removable optical modules using EN 4531-101 contacts.

Luft- und Raumfahrt - Optischer Rechtecksteckverbinder in modularer Bauweise, Betriebstemperatur 125 °C, für EN 4531-101 Kontakte - Teil 001: Technische Lieferbedingungen

Diese Europäische Norm legt die allgemeinen Merkmale, die Bedingungen für Qualifikation, Abnahme und Qualitätssicherung sowie die Prüfprogramme und -gruppen für Rechtecksteckverbinder nach EN 4165 mit austauschbaren optischen Modulen und Kontakten nach EN 4531-101 fest.

Série aérospatiale - Connecteurs optiques rectangulaires, modulaires, température d'utilisation 125 °C, pour contacts EN 4531-101 - Partie 001: Spécification technique

La présente Norme Européenne spécifie les caractéristiques générales, les conditions de qualification, d'acceptation et d'assurance qualité, aussi bien que les programmes et groupes d’essais pour les connecteurs rectangulaires EN 4165 avec des modules optiques démontables utilisant des contacts EN 4531-101.

Aeronavtika - Konektorji, optični, pravokotni, modularni, za delovno temperaturo 125 °C, za kontakte po EN 4531-101 - 001. del: Tehnična specifikacija

General Information

• Status: Withdrawn
• Publication Date: 05-Feb-2013
• Withdrawal Date: 16-Dec-2014
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Dec-2014
• Ref Project: SIST EN 4701-001:2014 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 001: Technical specification

Relations

• Replaced By: EN 4701-001:2014 - Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 001: Technical specification
• Effective Date: 24-Dec-2014

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.FLMDLuft- und Raumfahrt - Optischer Rechtecksteckverbinder in modularer Bauweise, Betriebstemperatur 125 °C, für EN 4531-101 Kontakte - Teil 001: Technische LieferbedingungenSérie aérospatiale - Connecteurs optiques rectangulaires, modulaires, température d'utilisation 125 °C, pour contacts EN 4531-101 - Partie 001: Spécification techniqueAerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531-101 contacts - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4701-001:2013SIST EN 4701-001:2014en01-februar-2014SIST EN 4701-001:2014SLOVENSKI
STANDARD



SIST EN 4701-001:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4701-001
February 2013 ICS 49.090 English Version
Aerospace series - Connectors, optical, rectangular, modular, operating temperature 125 °C, for EN 4531 contacts - Part 001: Technical specification
Série aérospatiale - Connecteurs optiques rectangulaires, modulaires, température d'utilisation 125 °C, pour contacts EN 4531 - Partie 001: Spécification technique
Luft- und Raumfahrt - Optischer Rechtecksteckverbinder in modularer Bauweise Betriebstemperatur 125 °C, für EN 4531 Kontakte - Teil 001: Technische Lieferbedingungen This European Standard was approved by CEN on 21 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4701-001:2013: ESIST EN 4701-001:2014



EN 4701-001:2013 (E) 2 Contents Page Foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Description . 6 5 Design . 7 6 Definition drawings . 9 7 Tests . 17 8 Quality assurance . 21 9 Designation and marking . 28
SIST EN 4701-001:2014



EN 4701-001:2013 (E) 3 Foreword This document (EN 4701-001:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This Eur
...