prEN 15354
(Main)Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Characterisation and designation
Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Characterisation and designation
This document gives a guidance for the characterisation and the designation of extruded and/or calendered, non-reinforced film or sheeting made of plasticized poly(vinyl chloride) (PVC-P). It specifies the corresponding test methods for the assessment of the characteristics. This document is applicable to film and sheeting in the range of thickness from 0,05 mm to 1 mm.
Kunststoffe - Extrudierte und/oder kalandrierte nichtverstärkte Folien und Bahnen aus weichmacherhaltigem Polyvinylchlorid (PVC-P) - Leitfaden für die Charakterisierung und Bezeichnung
Dieses Dokument legt die Charakterisierung und Bezeichnung von extrudierten und/oder kalandrierten Folien oder Bahnen aus weichmacherhaltigem Polyvinylchlorid (PVC-P) fest. Es legt die entsprechenden Prüfverfahren für die Beurteilung der Kenngrößen fest.
Dieses Dokument ist für Folien und Bahnen mit einer Dicke zwischen 0,05 mm und 1 mm anwendbar.
Plastiques - Film et feuille en poly(chlorure de vinyle) plastifié (PVC-P) extrudés et/ou calandrés, non renforcés - Caractérisation et désignation
Le présent document spécifie la caractérisation et la désignation d’un film ou d’une feuille en
poly(chlorure de vinyle) plastifié (PVC-P) extrudé(e) et/ou calandré(e), non renforcé(e). Il spécifie les
méthodes d’essai correspondantes pour l’évaluation des caractéristiques.
Le présent document est
Polimerni materiali - Ekstrudirani in/ali kalandrirani, neojačeni filmi ali plošče iz mehčanega polivinilklorida (PVC-P) - Karakterizacija in označevanje
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN 15354:2021
01-september-2021
Polimerni materiali - Ekstrudirani in/ali kalandrirani, neojačeni filmi ali plošče iz
mehčanega polivinilklorida (PVC-P) - Karakterizacija in označevanjePlastics - Extruded and/or calendered, non-reinforced film and sheeting made of
plasticized poly(vinyl chloride) (PVC-P) - Characterisation and designation
Kunststoffe - Extrudierte und/oder kalandrierte nichtverstärkte Folien und Bahnen aus
weichmacherhaltigem Polyvinylchlorid (PVC-P) - Leitfaden für die Charakterisierung und
BezeichnungPlastiques - Film et feuille en poly(chlorure de vinyle) plastifié (PVC-P) extrudés et/ou
calandrés, non renforcés - Caractérisation et désignationTa slovenski standard je istoveten z: prEN 15354
ICS:
83.140.10 Filmi in folije Films and sheets
oSIST prEN 15354:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 15354:2021
---------------------- Page: 2 ----------------------
oSIST prEN 15354:2021
DRAFT
EUROPEAN STANDARD
prEN 15354
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2021
ICS 83.140.10 Will supersede CEN/TS 15354:2006
English Version
Plastics - Extruded and/or calendered, non-reinforced film
and sheeting made of plasticized poly(vinyl chloride)
(PVC-P) - Characterisation and designation
Plastiques - Film et feuille en poly(chlorure de vinyle) Kunststoffe - Extrudierte und/oder kalandrierte
plastifié (PVC-P) extrudés et/ou calandrés, non nichtverstärkte Folien und Bahnen aus
renforcés - Caractérisation et désignation weichmacherhaltigem Polyvinylchlorid (PVC-P) -
Leitfaden für die Charakterisierung und BezeichnungThis draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15354:2021 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 15354:2021
prEN 15354:2021 (E)
Contents Page
European foreword ............................................................................................................................................ 3
1 Scope .......................................................................................................................................................... 4
2 Normative references .......................................................................................................................... 4
3 Terms and definitions ......................................................................................................................... 5
4 Appearance ............................................................................................................................................. 6
5 Characterization of film or sheeting .............................................................................................. 7
6 Designation ............................................................................................................................................. 9
Annex A (normative) Test method for the determination of the emboss retention ................ 10
A.1 Test specimen ...................................................................................................................................... 10
A.2 Procedure .............................................................................................................................................. 10
A.3 Test report ............................................................................................................................................. 10
---------------------- Page: 4 ----------------------oSIST prEN 15354:2021
prEN 15354:2021 (E)
European foreword
This document (prEN 15354:2021) has been prepared by Technical Committee CEN/TC 249 “Plastics”,
the secretariat of which is held by NBN.This document is currently submitted to the CEN Enquiry.
This document will supersede CEN/TS 15354:2006.
In comparison with the previous edition, the following technical modifications have been made:
— Document transposed from TS into EN;— Normative references updated;
— Table 1 revised.
---------------------- Page: 5 ----------------------
oSIST prEN 15354:2021
prEN 15354:2021 (E)
1 Scope
This document specifies the characterization and the designation of extruded and/or calendered, non-
reinforced film or sheeting made of plasticized poly(vinyl chloride) (PVC-P). It specifies the
corresponding test methods for the assessment of the characteristics.This document is applicable to film and sheeting in the range of thickness from 0,05 mm to 1 mm.
2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 176, Plastics - Determination of loss of plasticizers - Activated carbon method (ISO 176)
EN ISO 177, Plastics - Determination of migration of plasticizers (ISO 177)EN ISO 183, Plastics — Qualitative evaluation of the bleeding of colorants
EN ISO 291, Plastics - Standard atmospheres for conditioning and testing (ISO 291)
EN ISO 527-1, Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1)
EN ISO 527-3, Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO
527-3)EN ISO 877 (all parts), Plastics — Methods of exposure to solar radiation
EN ISO 1183 (all parts), Plastics — Method for determining the density and relative density of non-cellular
plasticsEN ISO 2812 (all parts), Paints and varnishes — Determination of resistance to liquids
EN ISO 3451-5, Plastics - Determination of ash - Part 5: Poly(vinyl chloride) (ISO 3451-5)
EN ISO 4892-1, Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO
4892-1)EN ISO 4892-2, Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO
4892-2)EN ISO 6383-1, Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method
(ISO 6383-1)EN ISO 6383-2, Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method
(ISO 6383-2)EN ISO 11501, Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501)
EN ISO 11502, Plastics - Film and sheeting - Determination of blocking resistance (ISO 11502)
EN ISO 11664 (all parts), ColorimetryEN ISO 18314-1, Analytical colorimetry - Part 1: Practical colour measurement (ISO 18314-1)
---------------------- Page: 6 ----------------------oSIST prEN 15354:2021
prEN 15354:2021 (E)
ISO 4582, Plastics — Determination of changes in colour and variations in properties after exposure to
glass-filtered solar radiation, natural weathering or laboratory radiation sources
ISO 4591, Plastics — Film and sheeting — Determination of average thickness of a sample, and average
thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)ISO 4592, Plastics — Film and sheeting — Determination of length and width
ISO 4593, Plastics — Film and sheeting — Determination of thickness by mechanical scanning
ISO 4892-4, Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc
lampsISO 8570, Plastics — Film and sheeting - Determinat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.