EN ISO 11502:2018

Plastics - Film and sheeting - Determination of blocking resistance (ISO 11502:2018)

This document specifies two methods for assessing the tendency of flexible plastic films and sheets to adhere to one another when left in contact for some time, at a specified temperature and under light pressure. One method is qualitative and the other is quantitative.

Kunststoffe - Folien und Bahnen - Bestimmung des Blockwiderstandes (ISO 11502:2018)

Dieses Dokument legt zwei Verfahren zur Beurteilung der Neigung von flexiblen Kunststofffolien und Kunststoffbahnen fest, aneinander zu haften, wenn sie sich eine bestimmte Zeit bei einer festgelegten Temperatur und unter leichtem Druck in Kontakt miteinander befunden haben. Das eine Verfahren ist ein qualitatives, das andere ein quantitatives Verfahren.

Plastiques - Film et feuille - Détermination du pouvoir bloquant (ISO 11502:2018)

Le présent document spécifié deux méthodes pour l'évaluation de la tendance de films et feuilles plastiques souples à adhérer les un(e) aux autres lorsqu'ils (elles) sont en contact pendant quelque temps, à une température donnée et sous faible pression. Une méthode est qualitative et l'autre est quantitative.

Polimerni materiali - Filmi in folije - Ugotavljanje odpornosti proti zlepljenju (ISO 11502:2018)

Ta dokument določa dve metodi za ocenjevanje težnje fleksibilnih filmov in folij iz polimernih materialov za zlepljenje, če so nekaj časa v stiku, pri določeni temperaturi in pod manjšim pritiskom. Ena metoda je kakovostna, druga pa količinska.

General Information

• Status: Published
• Publication Date: 11-Dec-2018
• Withdrawal Date: 29-Jun-2019
• ICS: 83.140.10 - Films and sheets
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 12-Dec-2018
• Completion Date: 12-Dec-2018
• Ref Project: SIST EN ISO 11502:2019 - Plastics - Film and sheeting - Determination of blocking resistance (ISO 11502:2018)

Relations

• Replaces: EN ISO 11502:2005 - Plastics - Film and sheeting - Determination of blocking resistance (ISO 11502:1995)
• Effective Date: 19-Dec-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11502:2019
01-februar-2019
1DGRPHãþD
SIST EN ISO 11502:2005
Polimerni materiali - Filmi in folije - Ugotavljanje odpornosti proti zlepljenju (ISO
11502:2018)
Plastics - Film and sheeting - Determination of blocking resistance (ISO 11502:2018)
Kunststoffe - Folien und Bahnen - Bestimmung des Blockwiderstandes (ISO
11502:2018)
Plastiques - Film et feuille - Détermination du pouvoir bloquant (ISO 11502:2018)
Ta slovenski standard je istoveten z: EN ISO 11502:2018
ICS:
83.140.10 Filmi in folije Films and sheets
SIST EN ISO 11502:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11502:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 11502:2019


EN ISO 11502
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2018
EUROPÄISCHE NORM
ICS 83.140.10 Supersedes EN ISO 11502:2005
English Version

Plastics - Film and sheeting - Determination of blocking
resistance (ISO 11502:2018)
Plastiques - Film et feuille - Détermination du pouvoir Kunststoffe - Folien und Bahnen - Bestimmung des
bloquant (ISO 11502:2018) Blockwiderstandes (ISO 11502:2018)
This European Standard was approved by CEN on 4 November 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11502:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11502:2019
EN ISO 11502:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11502:2019
EN ISO 11502:2018 (E)
European foreword
This document (EN ISO 11502:2018) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2019, and conflicting national standards shall be
withdrawn at the latest by June 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11502:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11502:2018 has been approved by CEN as EN ISO 11502:2018 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 11502:2019

---------------------- Page: 6 ----------------------

SIST EN ISO 11502:2019
INTERNATIONAL ISO
STANDARD 11502
Second edition
2018-11
Plastics — Film and sheeting —
Determination of blocking resistance
Plastiques — Film et feuille — Détermination du pouvoir bloquant
Reference number
ISO 11502:2018(E)
©
ISO 2018

---------------------- Page: 7 ----------------------

SIST EN IS
...