prEN 3646-004
(Main)Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C continuous - Part 004: Receptacle, jam-nut mounting - Product standard
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C continuous - Part 004: Receptacle, jam-nut mounting - Product standard
This document specifies the characteristics of the jam-nut mounted receptacles of the family of bayonet coupling circular connectors, intended for use in an operating temperature range of -65 °C to 175 °C or 200 °C continuous.
This document applies to models specified in Table 4.
For contact, filler plugs and rear accessories associated with this receptacle see EN 3646-002. For plugs and protective covers, see EN 3646-008 and EN 3646-009 respectively.
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 004: Fester Steckverbinder mit Mutternbefestigung - Produktnorm
Série aérospatiale - Connecteurs électriques circulaires à accouplement par baïonenettes, température d'utilisation 175 °C ou 200 °C continu - Partie 004 : Embasse à fixation par écrou - Norme de produit
Le présent document spécifie les caractéristiques des embases à fixation par écrou de la famille des connecteurs circulaires à accouplement par baïonnettes, destinés à une utilisation dans une plage de températures comprises entre −65 °C et 175 °C ou 200 °C continu.
Il s'applique aux modèles spécifiés dans le Tableau 4.
Pour les contacts, les obturateurs et les accessoires arrière associés à cette embase, voir l’EN 3646-002. Pour les fiches et les bouchons de vol, voir respectivement l’EN 3646-008 et l’EN 3646-009.
Aeronavtika - Konektorji, električni, okrogli, z bajonetnim spojem, neprekinjena delovna temperatura 175 °C - 004. del: Vtičnica, vgradnja z matico - Standard izdelka
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 3646-004:2024
01-junij-2024
Aeronavtika - Konektorji, električni, okrogli, z bajonetnim spojem, neprekinjena
delovna temperatura 175 °C - 004. del: Vtičnica, vgradnja z matico - Standard
izdelka
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating
temperature 175 °C continuous - Part 004: Receptacle, jam-nut mounting - Product
standard
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung,
Betriebstemperatur 175 °C oder 200 °C konstant - Teil 004: Fester Steckverbinder mit
Mutternbefestigung - Produktnorm
Série aérospatiale - Connecteurs électriques circulaires à accouplement par
baïonenettes, température d'utilisation 175 °C ou 200 °C continu - Partie 004 : Embasse
à fixation par écrou - Norme de produit
Ta slovenski standard je istoveten z: prEN 3646-004
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3646-004:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 3646-004:2024
---------------------- Page: 2 ----------------------
oSIST prEN 3646-004:2024
DRAFT
EUROPEAN STANDARD
prEN 3646-004
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2024
ICS 49.060 Will supersede EN 3646-004:2015
English Version
Aerospace series - Connectors, electrical, circular, bayonet
coupling, operating temperature 175 °C continuous - Part
004: Receptacle, jam-nut mounting - Product standard
Série aérospatiale - Connecteurs électriques circulaires Luft- und Raumfahrt - Elektrische Rundsteckverbinder
à accouplement par baïonenettes, température mit Bajonettkupplung, Betriebstemperatur 175 °C oder
d'utilisation 175 °C ou 200 °C continu - Partie 004 : 200 °C konstant - Teil 004: Fester Steckverbinder mit
Embasse à fixation par écrou - Norme de produit Mutternbefestigung - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3646-004:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 3646-004:2024
prEN 3646-004:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Dimensions and mass . 4
4.2 Tig
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.