EN 3456:2009

Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled - a ≤ 6 mm

This European Standard specifies the requirements relating to:
Titanium alloy TI-P64001 (Ti-6Al-4V)
Annealed
Sheet and strip, hot rolled
a ≤ 6 mm
for aerospace applications.

Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglüht - Bleche und Bänder, warmgewalzt - a ≤ 6 mm

Diese Norm legt die Anforderungen an
Titanlegierung TI P64001 (Ti 6Al 4V)
Geglüht
Bleche und Bänder, warmgewalzt
a < oder = 6 mm
für Anwendungen in der Luft  und Raumfahrt fest.

Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Tôles et bandes, laminées à chaud - a ≤ 6 mm

La présente norme spécifie les exigences relatives à :
Alliage de titane TI-P64001 (Ti-6Al-4V)
Recuit
Tôles et bandes, laminées à chaud
a  ≤ 6 mm
pour les applications aérospatiales.

Aeronavtika - Titanova zlitina TI-P64001 (Ti-6Al-4V) - Žarjena - Pločevina in trakovi, vroče valjani - a ≤ 6 mm

Ta evropski standard določa zahteve, ki se nanašajo na: titanovo zlitino TI-P64001 (Ti-6Al-4V), žarjena, pločevina in trakovi, vroče valjani a ≤ 6 mm za aeronavtiko.

General Information

• Status: Withdrawn
• Publication Date: 27-Oct-2009
• Withdrawal Date: 17-Jul-2012
• ICS: 49.025.30 - Titanium
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 18-Jul-2012
• Completion Date: 18-Jul-2012
• Ref Project: SIST EN 3456:2010 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled - a ≤ 6 mm

Relations

• Replaced By: EN 3456:2012 - Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Sheet and strip, hot rolled — a ≤ 6 mm
• Effective Date: 07-Dec-2011

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2010
$HURQDYWLND7LWDQRYD]OLWLQD7,37L$O9äDUMHQD3ORþHYLQDLQWUDNRYL
YURþHYDOMDQLD”PP
$HURVSDFHVHULHV7LWDQLXPDOOR\7,37L$O9$QQHDOHG6KHHWDQGVWULS
KRWUROOHGD”PP
/XIWXQG5DXPIDKUW7LWDQOHJLHUXQJ7,37L$O9*HJOKW%OHFKHXQG
%lQGHUZDUPJHZDO]WD”PP
6pULHDpURVSDWLDOH$OOLDJHGHWLWDQH7,37L$O95HFXLW7{OHVHWEDQGHV
ODPLQpHVjFKDXGD”PP
Ta slovenski standard je istoveten z: EN 3456:2009
ICS:
49.025.30 Titan Titanium
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3456
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2009
ICS 49.025.30
English Version
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) -
Annealed - Sheet and strip, hot rolled - a ≤ 6 mm
Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V)
- Recuit - Tôles et bandes, laminées à chaud - a ≤ 6 mm - Geglüht - Bleche und Bänder, warmgewalzt - a ≤ 6 mm
This European Standard was approved by CEN on 5 October 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3456:2009: E
worldwide for CEN national Members.

Foreword
This document (EN 3456:2009) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2010, and conflicting national standards shall be withdrawn at the
latest by April 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Introduction
This standard is pa
...