Gas analysis - Investigation and treatment of analytical bias (ISO 15796:2005)

ISO 15796:2005 specifies generic methods for detecting and correcting bias (systematic errors) of analytical procedures for the analysis of gases, using reference gas mixtures or reference analytical procedures, as well as for estimating the correction uncertainty.
The main sources of (and parameters affecting) bias of analytical procedures are instrumental drift (time) and matrix interferences (matrix composition). Moreover, bias normally varies with analyte concentration. ISO 15796:2005 therefore establishes protocols for detecting and correcting drift for an analytical system of limited stability, and for investigating and handling bias of a stable analytical system for a specified range of sample composition. These protocols are intended to be used in method development and method validation studies, either separately or sequentially.
ISO 15796:2005 specifies procedures for two options, applicable to systematic effects, as follows:
1) tracing the observed pattern of deviations and correcting for their effect,
2) averaging over their effects and increasing the uncertainty,
where normally the first option entails lower uncertainty at the expense of higher effort.
For the convenience of the user, the methods specified in ISO 15796:2005 are described for procedures of composition analysis, i.e. procedures for measuring the concentration of a specified analyte in a gas mixture. However, they are equally applicable to measurements of physico-chemical properties of a gas or gas mixture relevant to gas analysis, and translation into this subject field is straightforward.

Gasanalyse - Untersuchung und Behandlung von systematischen Abweichungen (ISO 15796:2005)

Diese Internationale Norm legt eine allgemeine Methoden zur Ermittlung und Korrektur systematischer
Abweichungen (Bias) bei Gasanalyseverfahren unter Verwendung von Referenzgasgemischen oder
analytischen Referenzverfahren, sowie zur Ermittlung der mit einer Korrektur verbundenen Unsicherheit fest.
Die hauptsächlichen Quellen (bzw. Einflussfaktoren) für systematische Abweichungen von Analysenverfahren
sind Gerätedrift (Zeit) und Querempfindlichkeiten (Matrixzusammensetzung). Darüber hinaus ändern sich die
systematische Abweichungen in der Regel mit der Analytkonzentration. Dementsprechend werden in dieser
Internationalen Norm Prozeduren für die beiden folgenden Teilaufgaben angegeben:
⎯ Ermittlung und Korrektur von Drift für ein gasanalytisches Messsystem begrenzter Stabilität,
⎯ Untersuchung und Behandlung systematischer Abweichungen bei einem stabilen gasanalytischen
Messsystem für einen festgelegten Bereich der Probenzusammensetzung.
Die Prozeduren sind zur Verwendung bei der Entwicklung und Validierung von Gasanalyseverfahren gedacht,
sowohl getrennt als auch in Kombination.
In dieser Internationalen Norm werden zwei verschiedene Vorgehensweisen bei der Behandlung
systematischer Effekte für einen definierten Anwendungsbereich (Probenzusammensetzung) berücksichtigt:
a) Verfolgung des beobachteten Abweichungsmusters und probenspezifische Korrektur des Effekts,
b) Mittelung über die Effekte und Vergrößerung der Unsicherheit.
Dabei führt in der Regel die erste Vorgehensweise zu kleineren Unsicherheiten bei höherem Aufwand.
Der Einfachheit halber werden die in dieser Internationalen Norm behandelten Methoden als Prozeduren für
die Analyse der Gaszusammensetzung, d. h. für die Messung der Konzentration eines festgelegten Analyten
in einem Gasgemisch dargestellt.

Analyse des gaz - Investigation et traitement des biais analytiques (ISO 15796:2005)

L'ISO 15796:2005 spécifie des méthodes génériques de détection et de correction des biais (erreurs systématiques) des modes opératoires d'analyse pour l'analyse des gaz, en utilisant des mélanges de gaz de référence ou des modes opératoires d'analyse de référence, ainsi que pour l'estimation de l'incertitude de correction.
Les principales sources de biais et les principaux paramètres qui affectent le biais des modes opératoires d'analyse sont la dérive (temporelle) instrumentale et les interactions dues à la matrice (composition matricielle). Par ailleurs, le biais varie normalement avec la concentration d'analyte. L'ISO 15796:2005 établit par conséquent des protocoles pour la détection et la correction de la dérive pour un système d'analyse à constance limitée, et pour l'investigation et le traitement du biais d'un système d'analyse stable pour une plage spécifiée de compositions d'échantillon. Ces protocoles sont destinés à être utilisés pour le développement des méthodes et les études de validation des méthodes, soit séparément ou par séquence.
L'ISO 15796:2005 spécifie des modes opératoires pour deux options, applicables aux effets systématiques, comme suit:
localiser le modèle des écarts observés et corriger leurs effets,
calculer la moyenne sur leurs effets et augmenter l'incertitude,
où la première option nécessite normalement une incertitude plus faible aux dépens d'un plus grand effort.
Pour des raisons de commodité pour l'utilisateur, les méthodes spécifiées dans l'ISO 15796:2005 sont décrites pour les modes opératoires d'analyse de composition, c'est-à-dire les modes opératoires de mesurage de la concentration d'un analyte spécifié dans un mélange de gaz. Toutefois, elles s'appliquent de la même manière aux mesures des propriétés physico-chimiques d'un gaz ou d'un mélange de gaz correspondant à l'analyse de gaz, et la traduction dans le présent domaine d'application est explicite.

Analiza plinov - Študija in določanje biasa (ISO 15796:2005)

General Information

Status
Published
Publication Date
19-Aug-2008
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Aug-2008
Due Date
28-Sep-2009
Completion Date
20-Aug-2008

Buy Standard

Standard
EN ISO 15796:2008
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15796:2008
01-oktober-2008
$QDOL]DSOLQRYâWXGLMDLQGRORþDQMHELDVD ,62
Gas analysis - Investigation and treatment of analytical bias (ISO 15796:2005)
Gasanalyse - Untersuchung und Behandlung von systematischen Abweichungen (ISO
15796:2005)
Analyse des gaz - Investigation et traitement des biais analytiques (ISO 15796:2005)
Ta slovenski standard je istoveten z: EN ISO 15796:2008
ICS:
71.040.40 Kemijska analiza Chemical analysis
SIST EN ISO 15796:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15796:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 15796:2008
EUROPEAN STANDARD
EN ISO 15796
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2008
ICS 71.040.40

English Version
Gas analysis - Investigation and treatment of analytical bias
(ISO 15796:2005)
Analyse des gaz - Investigation et traitement des biais Gasanalyse - Untersuchung und Behandlung von
analytiques (ISO 15796:2005) systematischen Abweichungen (ISO 15796:2005)
This European Standard was approved by CEN on 30 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15796:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15796:2008
EN ISO 15796:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15796:2008
EN ISO 15796:2008 (E)
Foreword
The text of ISO 15796:2005 has been prepared by Technical Committee ISO/TC 158 “Analysis of gases” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 15796:2008 by
Technical Committee CEN/SS N21 “Gaseous fuels and combustible gas” the secretariat of which is held by
CMC.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2009, and conflicting national standards shall be withdrawn
at the latest by February 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 15796:2005 has been approved by CEN as a EN ISO 15796:2008 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 15796:2008

---------------------- Page: 6 ----------------------

SIST EN ISO 15796:2008


INTERNATIONAL ISO
STANDARD 15796
First edition
2005-03-01

Gas analysis — Investigation and
treatment of analytical bias
Analyse des gaz — Investigation et traitement des biais analytiques




Reference number
ISO 15796:2005(E)
©
ISO 2005

---------------------- Page: 7 ----------------------

SIST EN ISO 15796:2008
ISO 15796:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces whi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.