EN 14974:2006/FprA1

Facilities for users of roller sports equipment - Safety requirements and test methods

This standard applies to facilities for users of inline-skates, roller skates, skateboards or similar roller sports equipment, as well as BMX cycles (hereinafter referred to as facility/facilities). It specifies general and specific requirements and test methods for facilities used in unsupervised areas. The purpose of this European Standard is to specify the safety requirements, which to a large extent protect users and third parties (e. g. spectators) from hazards when using a facility as intended or as can be reasonably expected. This standard shall not be applicable for bike-parcours (e. g. dirt tracks).

Anlagen für Benutzer von Rollsportgeräten - Sicherheitstechnische Anforderungen und Prüfverfahren

Installations pour sports à roulettes et BMX - Exigences de sécurité et méthodes d'essai

Naprave za poligon za rolanje - Varnostne zahteve in preskusne metode

General Information

• Status: Not Published
• ICS: 97.220.10 - Sports facilities
• Technical Committee: CEN/TC 136 - Sports, playground and other recreational equipment
• Drafting Committee: CEN/TC 136/WG 12 - Facilities for users of roller sport equipment
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 11-May-2010
• Due Date: 14-May-2011
• Completion Date: 11-May-2010
• Ref Project: SIST EN 14974:2006/kFprA1:2010 - Facilities for users of roller sports equipment - Safety requirements and test methods

Relations

• Merged Into: EN 14974:2006+A1:2010 - Facilities for users of roller sports equipment - Safety requirements and test methods
• Effective Date: 18-Jan-2023
• Amends: EN 14974:2006 - Facilities for users of roller sports equipment - Safety requirements and test methods
• Effective Date: 07-Nov-2009

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2010
Naprave za poligon za rolanje - Varnostne zahteve in preskusne metode
Facilities for users of roller sports equipment - Safety requirements and test methods
Anlagen für Benutzer von Rollsportgeräten - Sicherheitstechnische Anforderungen und
Prüfverfahren
Installations pour sports à roulettes et BMX - Exigences de sécurité et méthodes d'essai
Ta slovenski standard je istoveten z: EN 14974:2006/FprA1
ICS:
97.220.10 Športni objekti Sports facilities
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 14974:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
February 2010
ICS 97.220.10
English Version
Facilities for users of roller sports equipment - Safety
requirements and test methods
Installations pour sports à roulettes et BMX - Exigences de Anlagen für Benutzer von Rollsportgeräten -
sécurité et méthodes d'essai Sicherheitstechnische Anforderungen und Prüfverfahren
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 136.
This draft amendment A1, if approved, will modify the European Standard EN 14974:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14974:2006/FprA1:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3
1 Modification to the Scope .4
2 Modification to Clause 2, Normative references .4
3 Modification to Clause 3, Terms and definitions .4
4 Modification to 4.7.3, Metal fastenings .4
5 Modification to 5.1.1.1 .4
6 Modification to 5.1.1.10 .5
7 Modification to 5.1.2.1, Structural integrity and stability .5
8 Modification to 5.1.2.5, Barriers .6
9 Modification to 5.2.4, Rail .6
10 Modification to 5.3.1, General .6
11 Modification to 5.3.2.1, General .6
12 Modification to 5.3.2.3, Dimensions for jump ramps .7

Foreword
This document (EN 14974:2006/FprA1:2010) has been prepared by Technical Committee CEN/TC 136
“Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
1 Modification to the Scope
Add the following text at the end of the Scope:
"This European Standard shall not be applicable for bike-parcours (e.g. dirt tracks).".
2 Modification to Clause 2, Normative references
Repla
...