EN ISO 18219-1:2021
(Main)Leather - Determination of chlorinated hydrocarbons in leather - Part 1: Chromatographic method for short-chain chlorinated paraffins (SCCPs) (ISO 18219-1:2021)
Leather - Determination of chlorinated hydrocarbons in leather - Part 1: Chromatographic method for short-chain chlorinated paraffins (SCCPs) (ISO 18219-1:2021)
This document specifies a chromatographic method to determine the amount of short-chain chlorinated paraffins (SCCPs) C10 to C13 in processed and unprocessed leathers.
Leder - Bestimmung von chlorierten Kohlenwasserstoffen in Leder - Teil 1: Chromatographisches Verfahren für kurzkettige Chlorparaffine (SCCP) (ISO 18219-1:2021)
Dieses Dokument legt ein chromatographisches Verfahren zur Bestimmung der in verarbeitetem und nicht verarbeitetem Leder vorkommenden kurzkettigen Chlorparaffine (SCCP) C10 bis C13 in verarbeitetem und nicht verarbeitetem Leder fest.
Cuir - Dosage des hydrocarbures chlorés dans le cuir - Partie 1: Méthode chromatographique pour les paraffines chlorées à chaîne courte (PCCC) (ISO 18219-1:2021)
Le présent document spécifie une méthode chromatographique permettant de déterminer la quantité de paraffines chlorées à chaîne courte (PCCC) C10 à C13 présente dans les cuirs traités et non traités.
Usnje - Določevanje kloriranih ogljikovodikov v usnju - 1. del: Kromatografska metoda za kratke verige kloriranih parafinov (SCCP) (ISO 18219-1:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2021
Nadomešča:
SIST EN ISO 18219:2015
Usnje - Določevanje kloriranih ogljikovodikov v usnju - 1. del: Kromatografska
metoda za kratke verige kloriranih parafinov (SCCP) (ISO 18219-1:2021)
Leather - Determination of chlorinated hydrocarbons in leather - Part 1: Chromatographic
method for short-chain chlorinated paraffins (SCCPs) (ISO 18219-1:2021)
Leder - Bestimmung von chlorierten Kohlenwasserstoffen in Leder - Teil 1:
Chromatographisches Verfahren für kurzkettige Chlorparaffine (SCCP) (ISO 18219-
1:2021)
Cuir - Dosage des hydrocarbures chlorés dans le cuir - Partie 1: Méthode
chromatographique pour les paraffines chlorées à chaîne courte (PCCC) (ISO 18219-
1:2021)
Ta slovenski standard je istoveten z: EN ISO 18219-1:2021
ICS:
59.140.30 Usnje in krzno Leather and furs
71.040.50 Fizikalnokemijske analitske Physicochemical methods of
metode analysis
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 18219-1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2021
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN ISO 18219:2015
English Version
Leather - Determination of chlorinated hydrocarbons in
leather - Part 1: Chromatographic method for short-chain
chlorinated paraffins (SCCPs) (ISO 18219-1:2021)
Cuir - Dosage des hydrocarbures chlorés dans le cuir - Leder - Bestimmung von chlorierten
Partie 1: Méthode chromatographique pour les Kohlenwasserstoffen in Leder - Teil 1:
paraffines chlorées à chaîne courte (PCCC) (ISO 18219- Chromatographisches Verfahren für kurzkettige
1:2021) Chlorparaffine (SCCP) (ISO 18219-1:2021)
This European Standard was approved by CEN on 7 May 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18219-1:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 18219-1:2021) has been prepared by Technical Committee ISO/IULTCS
"International Union of Leather Technologists and Chemists Societies" in collaboration with Technical
Committee CEN/TC 289 “Leather” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2021, and conflicting national standards
shall be withdrawn at the latest by December 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 18219:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 18219-1:2021 has been approved by CEN as EN ISO 18219-1:2021 without any
modification.
INTERNATIONAL ISO
STANDARD 18219-1
IULTCS
IUC 30-1
First edition
2021-05
Leather — Determination of
chlorinated hydrocarbons in
leather —
Part 1:
Chromatographic method for short-
chain chlorinated paraffins (SCCPs)
Cuir — Dosage des hydrocarbures chlorés dans le cuir —
Partie 1: Méthode chromatographique pour les paraffines chlorées à
chaîne courte (PCCC)
Reference numbers
ISO 18219-1:2021(E)
IULTCS/IUC 30-1:2021(E)
©
ISO 2021
ISO 18219-1:2021(E)
IULTCS/IUC 30-1:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
ISO 18219-1:2021(E)
IULTCS/IUC 30-1:2021(E)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus and materials. 1
6 Reagents . 2
7 Sampling . 2
8 Sample preparation and analysis . 2
8.1 Preparation of the SCCPs calibration solution (50 µg/ml) with 59 % chlorine content . 2
8.2 Extraction of leather . 3
8.3 Sulfuric acid clean-up . 3
8.4 GC-ECNI-MS determination . 3
9 Expression of results . 3
9.1 Evaluation . 3
9.2 Ions used for quantification . 3
9.3 Interference to SCCPs determination . 3
9.4 Calculation . 4
9.5 Precision . 4
10 Test report . 4
Annex A (informative) Gas chromatographic (GC-ECNI-MS) analysis operating parameters .6
Annex B (informative) Liquid chromatographic (LC-MS/MS) analysis operating parameters .7
Annex C (informative) Integration using peak shape evaluation (PSE) with GC-ECNI-MS .10
Bibliography .13
ISO 18219-1:2021(E)
IULTCS/IUC 30-1:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html.
This document prepared by the Chemical Test Commission of the International Union of Leather
Technologists and Chemists Societies (IUC Commission, IULTCS) in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, the secretariat of
which is held by UNI, in accordance with the agreement on technical co-operation between ISO and CEN
(Vienna Agreement).
IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to
further the advancement of leather science and technology. IULTCS has three Commissions, which
are responsible for establishing international methods for the sampling and testing of leather. ISO
recognizes IULTCS as an international standardizing body for the preparation of test methods for
leather.
This first edition of ISO 18219-1 cancels and replaces ISO 18219:2015, which has been technically
revised.
The main changes to ISO 18219:2015 are as follows:
— a modification of the ISO number and the title;
— Introduction revised and updated;
— a new Clause 3;
— technical changes to Clause 4;
— in 6.2, a new internal standard;
— in 8.3, the SPE clean-up changed to a procedure using sulfuric acid;
— new 9.2, 9.3, 9.4 and 9.5 to improve the method;
— a new Annex B with a LC
...
SLOVENSKI STANDARD
01-september-2021
Nadomešča:
SIST EN ISO 18219:2015
Usnje - Določevanje kloriranih ogljikovodikov v usnju - 1. del: Kromatografska
metoda za kratke verige kloriranih parafinov (SCCP) (ISO 18219-1:2021)
Leather - Determination of chlorinated hydrocarbons in leather - Part 1: Chromatographic
method for short-chain chlorinated paraffins (SCCPs) (ISO 18219-1:2021)
Leder - Bestimmung von chlorierten Kohlenwasserstoffen in Leder - Teil 1:
Chromatographisches Verfahren für kurzkettige Chlorparaffine (SCCP) (ISO 18219-
1:2021)
Cuir - Dosage des hydrocarbures chlorés dans le cuir - Partie 1: Méthode
chromatographique pour les paraffines chlorées à chaîne courte (PCCC) (ISO 18219-
1:2021)
Ta slovenski standard je istoveten z: EN ISO 18219-1:2021
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 18219-1
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2021
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN ISO 18219:2015
English Version
Leather - Determination of chlorinated hydrocarbons in
leather - Part 1: Chromatographic method for short-chain
chlorinated paraffins (SCCPs) (ISO 18219-1:2021)
Cuir - Dosage des hydrocarbures chlorés dans le cuir - Leder - Bestimmung von chlorierten
Partie 1: Méthode chromatographique pour les Kohlenwasserstoffen in Leder - Teil 1:
paraffines chlorées à chaîne courte (PCCC) (ISO 18219- Chromatographisches Verfahren für kurzkettige
1:2021) Chlorparaffine (SCCP) (ISO 18219-1:2021)
This European Standard was approved by CEN on 7 May 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18219-1:2021 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 18219-1:2021) has been prepared by Technical Committee ISO/IULTCS
"International Union of Leather Technologists and Chemists Societies" in collaboration with Technical
Committee CEN/TC 289 “Leather” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2021, and conflicting national standards
shall be withdrawn at the latest by December 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 18219:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 18219-1:2021 has been approved by CEN as EN ISO 18219-1:2021 without any
modification.
INTERNATIONAL ISO
STANDARD 18219-1
IULTCS
IUC 30-1
First edition
2021-05
Leather — Determination of
chlorinated hydrocarbons in
leather —
Part 1:
Chromatographic method for short-
chain chlorinated paraffins (SCCPs)
Cuir — Dosage des hydrocarbures chlorés dans le cuir —
Partie 1: Méthode chromatographique pour les paraffines chlorées à
chaîne courte (PCCC)
Reference numbers
ISO 18219-1:2021(E)
IULTCS/IUC 30-1:2021(E)
©
ISO 2021
ISO 18219-1:2021(E)
IULTCS/IUC 30-1:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
ISO 18219-1:2021(E)
IULTCS/IUC 30-1:2021(E)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus and materials. 1
6 Reagents . 2
7 Sampling . 2
8 Sample preparation and analysis . 2
8.1 Preparation of the SCCPs calibration solution (50 µg/ml) with 59 % chlorine content . 2
8.2 Extraction of leather . 3
8.3 Sulfuric acid clean-up . 3
8.4 GC-ECNI-MS determination . 3
9 Expression of results . 3
9.1 Evaluation . 3
9.2 Ions used for quantification . 3
9.3 Interference to SCCPs determination . 3
9.4 Calculation . 4
9.5 Precision . 4
10 Test report . 4
Annex A (informative) Gas chromatographic (GC-ECNI-MS) analysis operating parameters .6
Annex B (informative) Liquid chromatographic (LC-MS/MS) analysis operating parameters .7
Annex C (informative) Integration using peak shape evaluation (PSE) with GC-ECNI-MS .10
Bibliography .13
ISO 18219-1:2021(E)
IULTCS/IUC 30-1:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso .org/
iso/ foreword .html.
This document prepared by the Chemical Test Commission of the International Union of Leather
Technologists and Chemists Societies (IUC Commission, IULTCS) in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, the secretariat of
which is held by UNI, in accordance with the agreement on technical co-operation between ISO and CEN
(Vienna Agreement).
IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to
further the advancement of leather science and technology. IULTCS has three Commissions, which
are responsible for establishing international methods for the sampling and testing of leather. ISO
recognizes IULTCS as an international standardizing body for the preparation of test methods for
leather.
This first edition of ISO 18219-1 cancels and replaces ISO 18219:2015, which has been technically
revised.
The main changes to ISO 18219:2015 are as follows:
— a modification of the ISO number and the title;
— Introduction revised and updated;
— a new Clause 3;
— technical changes to Clause 4;
— in 6.2, a new internal standard;
— in 8.3, the SPE clean-up changed to a procedure using sulfuric acid;
— new 9.2, 9.3, 9.4 and 9.5 to improve the method;
— a new Annex B with a LC-MS/MS procedure;
iv © ISO 2021 – All rights reserved
---------------------- P
...
SLOVENSKI STANDARD
oSIST prEN ISO 18219-1:2019
01-junij-2019
8VQMH'RORþHYDQMHNORULUDQLKRJOMLNRYRGLNRYYXVQMXGHO .URPDWRJUDIVND
PHWRGD]DNUDWNHYHULJHNORULUDQLKSDUDILQRY 6&&3 ,62',6
Leather - Determination of chlorinated hydrocarbons in leather – Part 1:
Chromatographic method for short-chain chlorinated paraffins (SCCP) (ISO/DIS 18219-
1:2019)
Leder - Bestimmung von chlorierten Kohlenwasserstoffen in Leder - Teil 1:
Chromatographisches Verfahren für kurzkettige Chlorparaffine (SCCP) (ISO/DIS 18219-
1:2019)
Cuir - Dosage des hydrocarbures chlorés dans le cuir - Partie 1: Méthode
chromatographique pour les paraffines chlorées à chaîne courte (PCCC) (ISO/DIS
18219-1:2019)
Ta slovenski standard je istoveten z: prEN ISO 18219-1
ICS:
59.140.30 Usnje in krzno Leather and furs
oSIST prEN ISO 18219-1:2019 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN ISO 18219-1:2019
oSIST prEN ISO 18219-1:2019
ENTWURF
EUROPÄISCHE NORM
prEN ISO 18219-1
EUROPEAN STANDARD
NORME EUROPÉENNE
März 2019
ICS 59.140.30 Vorgesehen als Ersatz für EN ISO 18219:2015
Deutsche Fassung
Leder - Bestimmung von chlorierten Kohlenwasserstoffen in
Leder - Teil 1: Chromatographisches Verfahren für
kurzkettige Chlorparaffine (SCCP) (ISO/DIS 18219-1:2019)
Leather - Determination of chlorinated hydrocarbons in Cuir - Dosage des hydrocarbures chlorés dans le cuir -
leather - Part 1: Chromatographic method for short- Partie 1: Méthode chromatographique pour les
chain chlorinated paraffins (SCCP) (ISO/DIS 18219- paraffines chlorées à chaîne courte (PCCC) (ISO/DIS
1:2019) 18219-1:2019)
Dieser Europäische Norm-Entwurf wird den CEN-Mitgliedern zur parallelen Umfrage vorgelegt. Er wurde vom Technischen
Komitee CEN/TC 289 erstellt.
Wenn aus diesem Norm-Entwurf eine Europäische Norm wird, sind die CEN-Mitglieder gehalten, die CEN-Geschäftsordnung zu
erfüllen, in der die Bedingungen festgelegt sind, unter denen dieser Europäischen Norm ohne jede Änderung der Status einer
nationalen Norm zu geben ist.
Dieser Europäische Norm-Entwurf wurde von CEN in drei offiziellen Fassungen (Deutsch, Englisch, Französisch) erstellt. Eine
Fassung in einer anderen Sprache, die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine
Landessprache gemacht und dem CEN-CENELEC-Management-Zentrum mitgeteilt worden ist, hat den gleichen Status wie die
offiziellen Fassungen.
CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, der ehemaligen
jugoslawischen Republik Mazedonien, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland,
Litauen, Luxemburg, Malta, den Niederlanden, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, der Schweiz,
Serbien, der Slowakei, Slowenien, Spanien, der Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und
Zypern.
Die Empfänger dieses Norm-Entwurfs werden gebeten, mit ihren Kommentaren jegliche relevante Patentrechte, die sie kennen,
mitzuteilen und unterstützende Dokumentationen zur Verfügung zu stellen.
Warnvermerk : Dieses Schriftstück hat noch nicht den Status einer Europäischen Norm. Es wird zur Prüfung und Stellungnahme
vorgelegt. Es kann sich noch ohne Ankündigung ändern und darf nicht als Europäischen Norm in Bezug genommen werden.
EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
CEN-CENELEC Management-Zentrum: Rue de la Science 23, B-1040 Brüssel
© 2019 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. prEN ISO 18219-1:2019 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN
vorbehalten.
oSIST prEN ISO 18219-1:2019
prEN ISO 18219-1:2019 (D)
Inhalt
Seite
Europäisches Vorwort . 3
Vorwort . 4
Einleitung . 5
1 Anwendungsbereich . 6
2 Normative Verweisungen . 6
3 Kurzbeschreibung . 6
4 Geräte und Materialien . 6
5 Reagenzien . 6
6 Probenahme . 7
7 Probenvorbereitung und Analyse . 7
7.1 Herstellung der SCCP-Kalibrierlösung (50 µg/ml) mit einem Chlorierungsgrad von 59 % . 7
7.2 Extraktion von Leder . 7
7.3 Aufreinigung . 7
7.4 GC-MS-Bestimmung . 8
8 Auswertung . 8
9 Prüfbericht . 8
Anhang A (informativ) Betriebsparameter der chromatographischen Analyse . 9
A.1 Empfohlene Bedingungen für die Gaschromatographie-Massenspektrometrie (GC-ECNI-
MS) . 9
A.2 Kalibrierung und Berechnung . 9
oSIST prEN ISO 18219-1:2019
prEN ISO 18219-1:2019 (D)
Europäisches Vorwort
Dieses Dokument (prEN ISO 18219-1:2019) wurde vom Technischen Komitee „International Union of
Leather Technologists and Chemists Societies (IULTCS)“ in Zusammenarbeit mit dem Technischen Komitee
CEN/TC 289 „Leder“ erarbeitet, dessen Sekretariat von UNI gehalten wird.
Dieses Dokument ist derzeit zur parallelen Umfrage vorgelegt.
Dieses Dokument wird EN ISO 18219:2015 ersetzen.
Anerkennungsnotiz
Der Text von ISO/DIS 18219-1:2019 wurde von CEN als prEN ISO 18219-1:2019 ohne irgendeine
Abänderung genehmigt.
oSIST prEN ISO 18219-1:2019
prEN ISO 18219-1:2019 (D)
Vorwort
ISO (die Internationale Organisation für Normung) ist eine weltweite Vereinigung von Nationalen
Normungsorganisationen (ISO-Mitgliedsorganisationen). Die Erstellung von Internationalen Normen wird
üblicherweise von Technischen Komitees von ISO durchgeführt. Jede Mitgliedsorganisation, die Interesse an
einem Thema hat, für welches ein Technisches Komitee gegründet wurde, hat das Recht, in diesem Komitee
vertreten zu sein. Internationale staatliche und nichtstaatliche Organisationen, die in engem Kontakt mit ISO
stehen, nehmen ebenfalls an der Arbeit teil. ISO arbeitet eng mit der Internationalen Elektrotechnischen
Kommission (IEC) bei allen elektrotechnischen Themen zusammen.
Die Verfahren, die bei der Entwicklung dieses Dokuments angewendet wurden und die für die weitere Pflege
vorgesehen sind, werden in den ISO/IEC-Direktiven, Teil 1 beschrieben. Im Besonderen sollten die für die
verschiedenen ISO-Dokumentenarten notwendigen Annahmekriterien beachtet werden. Dieses Dokument
wurde in Übereinstimmung mit den Gestaltungsregeln der ISO/IEC-Direktiven, Teil 2 erarbeitet (siehe
www.iso.org/directives).
Es wird auf die Möglichkeit hingewiesen, dass einige Elemente dieses Dokuments Patentrechte berühren
können. ISO ist nicht dafür verantwortlich, einige oder alle diesbezüglichen Patentrechte zu identifizieren.
Einzelheiten zu Patentrechten, die während der Erarbeitung des Dokumentes identifiziert werden, werden
in der Einleitung und/oder in der ISO-Liste der erhaltenen Patentdeklarationen (siehe www.iso.org/patents)
angegeben.
Alle in diesem Dokument verwendeten Markennamen stellen eine Informationen für den Leser dar und
stellen keine Anerkennung der selben dar.
Eine Erläuterung der Bedeutung ISO-spezifischer Benennungen und Ausdrücke, die sich auf
Konformitätsbewertung beziehen, sowie Informationen über die Beachtung der WTO-Grundsätze zu
technischen Handelshemmnissen (TBT, en: Technical Barriers to Trade) durch ISO enthält der folgende Link:
Foreword — Supplementary information
ISO 18219 wurde von der Kommission für chemische Prüfungen der „International Union of Leather
Technologists and Chemists Societies“ (IUC Commission, IULTCS) in Zusammenarbeit mit dem Europäischen
Komitee für Normung (CEN), Technisches Komitee CEN/TC 289, Leder, dessen Sekretariat von UNI gehalten
wird, gemäß der Ver
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.