EN 3475-508:2007

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness

This standard specifies the procedures for measuring the plating thickness and centricity of metallic coatings on single conductors.
It shall be used together with EN 3475-100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 508: Schichtdicke des Uberzugs

Diese Norm legt die Verfahren zum Messen der Schichtdicke und Zentrizität von metallischen Überzügen auf
Einzeldrähten fest.
Sie ist in Verbindung mit EN 3475-100 anzuwenden.

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 508 : Epaisseur du revêtement

Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode - 508. del: Debelina prevleke

General Information

• Status: Published
• Publication Date: 28-Aug-2007
• Withdrawal Date: 28-Feb-2008
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3475-508:2007 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness

Relations

• Replaces: EN 3475-508:2002 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thicknessSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 508 : Epaisseur du revetementLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 508: Schichtdicke des UberzugsTa slovenski standard je istoveten z:EN 3475-508:2007SIST EN 3475-508:2007en49.060Aerospace electric equipment and systemsICS:SIST EN 3475-508:20041DGRPHãþDSLOVENSKI
STANDARDSIST EN 3475-508:200701-november-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-508August 2007ICS 49.060Supersedes EN 3475-508:2002
English VersionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 508: Plating thicknessSérie aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essais - Partie 508 : Epaisseurdu revêtementLuft- und Raumfahrt - Elektrische Leitungen fürLuftfahrtverwendung - Prüfverfahren - Teil 508:Schichtdicke des UberzugsThis European Standard was approved by CEN on 21 June 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-508:2007: E



EN 3475-508:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Test methods.4 4 Requirements.9



EN 3475-508:2007 (E) 3 Foreword This document (EN 3475-508:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2008, and conflicting national standards shall be withdrawn at the latest by February 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 3475-508:2002. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 3475-508:2007 (E) 4 1 Scope This standard specifies the procedures for measuring the plating thickness and centricity of metallic coatings on single conductors. It shall be used together with EN 3475-100. 2 Normative references The following referenced documents are indispensable for the application of this document. For dat
...