EN 3913:2007

Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components

This standard specifies the characteristics of short, self-locking, thin wall salvage inserts with silver plated internal thread, in NI-PH2601 (NI-P100HT), for aerospace applications.
Maximum test temperature 550 °C.

Luft- und Raumfahrt - Gewindeeinsätze, dünnwandig, selbstsichernd, kurz, aus hochwarmfester Nickelbasislegierung NI-PH2601 (NI-P100HT, Inconel 718), Innengewinde versilbert, zur Reparatur von Bauteilen

Diese Norm legt die Eigenschaften von kurzen, selbstsichernden, dünnwandigen Gewindeeinsätzen zur Reparatur, mit versilbertem Innengewinde, aus NI PH2601 (NI-P100HT), für Anwendungen in der Luft  und Raumfahrt fest.
Maximale Prüftemperatur 550 °C.

Série aérospatiale - Douilles filetées, à paroi mince, à freinage interne, courtes, en alliage résistant à chaud à base de nickel NI-PH2601 (NI-P100HT, Inconel 718), argentées sur filetage intérieur, pour récupération

Aeronavtika - Vložki, tanka stena, samozapiralni, kratki, iz toplotnoodporne zlitine na nikljevi osnovi NI-PH2601 (Ni-P100HT, Inconel 718), posrebreni, posrebren notranji navoj, za popravljanje sestavnih delov

General Information

• Status: Published
• Publication Date: 03-Apr-2007
• Withdrawal Date: 30-Oct-2007
• ICS: 49.030.30 - Nuts
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3913:2009 - Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Vložki, tanka stena, samozapiralni, kratki, iz toplotnoodporne zlitine na nikljevi osnovi NI-PH2601 (Ni-P100HT, Inconel 718), posrebreni, posrebren notranji navoj, za popravljanje sestavnih delovLuft- und Raumfahrt - Gewindeeinsätze, dünnwandig, selbstsichernd, kurz, aus hochwarmfester Nickelbasislegierung NI-PH2601 (NI-P100HT, Inconel 718), Innengewinde versilbert, zur Reparatur von BauteilenSérie aérospatiale - Douilles filetées, à paroi mince, à freinage interne, courtes, en alliage résistant à chaud à base de nickel NI-PH2601 (NI-P100HT, Inconel 718), argentées sur filetage intérieur, pour récupérationAerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 3913:2007SIST EN 3913:2009en,de01-junij-2009SIST EN 3913:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3913April 2007ICS 49.030.30 English VersionAerospace series - Insert, thin wall, self-locking, short, in heatresisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718),silver plated on internal thread, for salvage of componentsSérie aérospatiale - Douilles filetées, à paroi mince, àfreinage interne, courtes, en alliage résistant à chaud àbase de nickel NI-PH2601 (NI-P100HT, Inconel 718),argentées sur filetage intérieur, pour récupérationLuft- und Raumfahrt - Gewindeeinsätze, dünnwandig,selbstsichernd, kurz, aus hochwarmfesterNickelbasislegierung NI-PH2601 (NI-P100HT, Inconel 718),Innengewinde versilbert, zur Nacharbeit von BauteilenThis European Standard was approved by CEN on 28 August 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3913:2007: ESIST EN 3913:2009
...