iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 1483:1994

(Main)

Slotted raised countersunk (oval) head tapping screws (common head style) (ISO 1483:1983)

Slotted raised countersunk (oval) head tapping screws (common head style) (ISO 1483:1983)

Specifies the characteristics of screws with thread sizes from ST 2,2 up to and including ST 9,5; includes specifications with reference to International Standards; gives an example for the designation.

Linsensenk-Blechschrauben mit Schlitz (Einheitskopf) (ISO 1483:1983)

Diese Internationalen Norm enthält Festlegungen über Linsensenk- Blechschrauben mit Schlitz mit Gewinde von ST 2,2 bis ST 9,5.

Vis à tôle à tête fraisée bombée, fendue (ISO 1483:1983)

La présente Norme internationale spécifie les caractéristiques des vis à tôle à tête fraisée bombée, fendue, de diamètre nominal de filetage ST 2,2 à ST 9,5 inclus.

Pločevinski vijaki z zarezano lečasto ugrezno glavo (običajna oblika glave)

General Information

Status
Withdrawn
Publication Date
04-Jul-1994
Withdrawal Date
31-Jul-2011
ICS
21.060.10 - Bolts, screws, studs
Technical Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Drafting Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Aug-2011
Completion Date
01-Aug-2011
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN ISO 1483:1996 - Slotted raised countersunk (oval) head tapping screws (common head style) (ISO 1483:1983)

Relations

Replaced By
EN ISO 1483:2011 - Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011)
Effective Date
06-Aug-2011

Buy Standard

EN ISO 1483:1996EN ISO 1483:1996
PreviousNext
Standard
EN ISO 1483:1996
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-1996
3ORþHYLQVNLYLMDNL]]DUH]DQROHþDVWRXJUH]QRJODYR RELþDMQDREOLNDJODYH
Slotted raised countersunk (oval) head tapping screws (common head style) (ISO
1483:1983)
Linsensenk-Blechschrauben mit Schlitz (Einheitskopf) (ISO 1483:1983)
Vis a tôle a tete fraisée bombée, fendue (ISO 1483:1983)
Ta slovenski standard je istoveten z: EN ISO 1483:1994
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 3506-3:2025(Main)
Fasteners - Mechanical properties of corrosion resistant stainless steel fasteners - Part 3: Set screws (and similar fasteners not under tensile stress) with specified grades and hardness classes (ISO 3506-3:2025)
SIST EN ISO 3506-3:2025

This document specifies the mechanical and physical properties of set screws and similar fasteners not under tensile stress, made of corrosion resistant austenitic and duplex stainless steels, with specified grades and hardness classes.
ISO 3506-6 provides general rules and additional technical information on suitable stainless steels and their properties (detailed properties of stainless steel grades, corrosion behaviour with regards to pitting, crevice and intergranular corrosion, magnetic properties, etc.).
WARNING — Set screws conforming to the requirements of this document are tested at the ambient temperature range of 10 °C to 35 °C and are used in application ranging from –20 °C to +150 °C. It is possible that they do not retain the specified mechanical and physical properties at lower and/or elevated temperatures. Therefore, it is the responsibility of the user to determine the appropriate choices based on service environment conditions of the assembly (see also Clauses 5 and 6).
This document applies to set screws and similar fasteners not under tensile stress
—     with ISO metric thread in accordance with ISO 68-1,
—     with diameter/pitch combinations in accordance with ISO 261 and ISO 262,
—     with nominal thread diameter 1,6 mm to 24 mm,
—     with thread tolerances in accordance with ISO 965-1 and ISO 965-2,
—     with specified hardness classes, and
—     of any shape.
NOTE            The term set screw is used in the following for all screws and similar fasteners not under tensile stress within the scope of this document.
This document does not apply to screws under tensile stress (see ISO 3506-1). It does not specify requirements for functional properties such as shear strength or weldability.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3506-4:2025(Main)
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws with specified grades and hardness classes (ISO 3506-4:2025)
SIST EN ISO 3506-4:2025

This document specifies the mechanical and physical properties of tapping screws made of corrosion resistant austenitic, martensitic, ferritic and duplex stainless steels, with specified grades and hardness classes.
ISO 3506-6 provides general rules and additional technical information on suitable stainless steels and their properties (detailed properties of stainless steel grades, corrosion behaviour with regards to pitting, crevice and intergranular corrosion, magnetic properties, etc.).
WARNING — Tapping screws conforming to the requirements of this document are tested at the ambient temperature range of 10 °C to 35 °C and are used in applications ranging from –20 °C to +150 °C. It is possible that they do not retain the specified mechanical and physical properties at lower and/or elevated temperatures. Therefore, it is the responsibility of the user to determine the appropriate choices based on service environment conditions of the assembly (see also Clauses 5 and 6).
This document applies to tapping screws with threads ST2,2 to ST8, in accordance with ISO 1478.
This document does not apply to tapping screws with special properties, such as weldability.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7434:2024(Main)
Fasteners - Slotted set screws with cone point (ISO 7434:2024)
SIST EN ISO 7434:2024

This document specifies the characteristics of slotted set screws with cone point, in steel and stainless steel, with metric coarse pitch threads M1,2 to M12, and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4766:2024(Main)
Fasteners - Slotted set screws with flat point (ISO 4766:2024)
SIST EN ISO 4766:2024

This document specifies the characteristics of slotted set screws with flat point, in steel and stainless steel, with metric coarse pitch threads M1,2 to M12, and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7435:2024(Main)
Fasteners - Slotted set screws with dog point (ISO 7435:2024)
SIST EN ISO 7435:2024

This document specifies the characteristics of slotted set screws with long dog point for regular standard lengths and with short dog point for short standard lengths, in steel and stainless steel, with metric coarse pitch threads M1,6 to M12 and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5 or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7436:2024(Main)
Fasteners - Slotted set screws with cup point (ISO 7436:2024)
SIST EN ISO 7436:2024

This document specifies the characteristics of slotted set screws with cup point, in steel and stainless steel, with metric coarse pitch threads M1,6 to M12 and with product grade A.
If in certain cases other specifications are requested, hardness classes and stainless steel grades can be selected from ISO 898-5, or ISO 3506-3, and dimensional options from ISO 888, ISO 965-1 or ISO 4753.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7380-1:2023(Main)
Fasteners - Button head screws with reduced loadability - Part 1: Hexagon socket button head screws (ISO 7380-1:2022)
SIST EN ISO 7380-1:2023

This document specifies the characteristics of hexagon socket button head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M3 to M16, and with product grade A.
If, in certain cases, other specifications are requested, stainless steel grades can be selected from ISO 3506-1, and the dimensional options from ISO 888 or ISO 4753.
NOTE      The reduced loadability (related to the head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14581:2023(Main)
Fasteners - Hexalobular socket countersunk flat head screws (common head style) with reduced loadability (ISO 14581:2022)
SIST EN ISO 14581:2023

This document specifies the characteristics of hexalobular socket countersunk flat head screws with reduced loadability due to head design, in steel and stainless steel, with metric coarse pitch threads M2 to M10, and with product grade A.
If in certain cases other specifications are requested, stainless steel grades can be selected from ISO 3506‑1, and dimensional options from ISO 888 or ISO 4753.
NOTE 1   The reduced loadability (related to the countersunk head dimensions in combination with penetration of the hexalobular socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes; see Table 3.
NOTE 2   Hexalobular socket countersunk head screws (high head), with full loadability are specified in ISO 14582, but these products are not interchangeable, because of different head heights.
NOTE 3   Particular attention is needed to ensure alignment of the countersunk head with the bearing surface of the countersink in the assembly.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7380-2:2023(Main)
Fasteners - Button head screws with reduced loadability - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2022)
SIST EN ISO 7380-2:2023

This document specifies the characteristics of hexagon socket button head screws with collar, with reduced loadability due to head design, in steel, with metric coarse pitch threads M3 to M16, and with product grade A.
If in certain cases other specifications are requested, dimensional options can be selected from ISO 888 or ISO 4753.
NOTE      The reduced loadability (related to the head dimensions in combination with penetration of the hexagon socket specified in this document) implies a limitation of ultimate tensile load shown by a specific marking (property class preceded by a zero). The loadability in the head is assumed to be 80 % of that in the thread for all sizes and all property classes, see Table 4.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2702:2022(Main)
Fasteners - Heat treated tapping screws - Mechanical and physical properties (ISO 2702:2022)
SIST EN ISO 2702:2023

This document specifies the mechanical and physical properties of heat treated tapping screws made of steel, with thread sizes ST2,2 to ST9,5 in accordance with ISO 1478, when tested at the ambient temperature range of 10 °C to 35 °C, and the related test methods.
Tapping screws are designed to form mating threads in sheet metals, without their own threads being deformed. Tapping screws are not intended to be pretensioned by design, even though they can experience varying degrees of low-level tensile stress after installation.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day