EN 15636:2010
(Main)Sanitary appliances - Shower trays made from impact modified extruded acrylic sheets - Requirements and test methods
Sanitary appliances - Shower trays made from impact modified extruded acrylic sheets - Requirements and test methods
This European Standard specifies the requirements for shower trays for domestic purposes made from impact modified extruded acrylic sheet conforming with EN 13558 with the aim of ensuring that the product, when installed in accordance with the manufacturer's instructions, will provide satisfactory performance in use.
This standard is applicable to all sizes and shapes of shower trays.
Sanitärausstattungsgegenstände - Duschwannen, hergestellt aus schlagzäh-modifizierten extrudierten Acrylplatten - Anforderungen und Prüfverfahren
Diese Europäische Norm legt Anforderungen an Duschwannen für den Hausgebrauch, hergestellt aus
schlagzäh-modifizierten extrudierten Acrylplatten, die EN 13558 entsprechen, fest, mit dem Ziel sicherzustellen,
dass das nach den Einbauanweisungen des Herstellers eingebaute Produkt eine zufriedenstellende
Gebrauchstauglichkeit aufweist.
Diese Norm ist auf alle Größen und Formen von Duschwannen anwendbar.
Appareils sanitaires - Receveurs de douche en feuilles d'acrylique extrudées modifiées choc - Prescriptions et méthodes d'essai
La présente Norme européenne spécifie les prescriptions concernant les receveurs de douche à usage domestique constitués de feuilles d’acrylique extrudées modifiées choc conformes à l’EN 13558, dans le but de s’assurer que le produit, lorsqu’il est installé conformément aux instructions du fabricant, fournit une performance satisfaisante en cours d’utilisation.
La présente norme est applicable aux receveurs de douche de toutes tailles et de toutes formes.
Sanitarne naprave - Kadi za prhanje iz udarno modificiranih ekstrudiranih akrilnih plošč - Zahteve in preskusne metode
Ta evropski standard določa zahteve za kadi za prhanje za domačo uporabo, ki so izdelane iz udarno modificiranih ekstrudiranih akrilnih plošč, glede skladnosti s standardom EN 13558, da se zagotovi, da bo izdelek po namestitvi v skladu z navodili proizvajalca ob uporabi zadovoljivo deloval. Ta standard se uporablja za vse velikosti in oblike kadi za prhanje.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sanitärausstattungsgegenstände - Duschwannen, hergestellt aus schlagzäh-modifizierten extrudierten Acrylplatten - Anforderungen und PrüfverfahrenAppareils sanitaires - Receveurs de douche en feuilles d'acrylique extrudées modifiées choc - Prescriptions et méthodes d'essaiSanitary appliances - Shower trays made from impact modified extruded acrylic sheets - Requirements and test methods91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 15636:2010SIST EN 15636:2012en,fr,de01-september-2012SIST EN 15636:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15636
March 2010 ICS 91.140.70 English Version
Sanitary appliances - Shower trays made from impact modified extruded acrylic sheets - Requirements and test methods
Appareils sanitaires - Receveurs de douche en feuilles d'acrylique extrudées modifiées choc - Prescriptions et méthodes d'essai
Sanitärausstattungsgegenstände - Duschwannen, hergestellt aus schlagzäh-modifizierten extrudierten Acrylplatten - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 14 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15636:2010: ESIST EN 15636:2012
Shower tray test methods .7A.1Sequence of tests .7A.2Geometric deviations .7A.2.1Test apparatus .7A.2.2Squaring .7A.2.3Straightness of the rim side .8A.2.4Straightness of the bottom edge of the rim .9A.2.5Flatness of the top surface of the rim. 10A.3Resistance to temperature change . 11A.3.1Test apparatus . 11A.3.2Procedure . 11A.4Resistance to impact . 12A.4.1Test apparatus . 12A.4.2Procedure . 12A.5Determination of deflections . 12A.5.1General . 12A.5.2Test apparatus . 12A.5.3Preloading . 13A.5.4Deflection test 1 − Deflection of the rim and the bottom due to a load on the bottom . 13A.5.5Deflection test 2 − Deflection of the rim due to a load on the rim on the side of entry . 14Bibliography . 17 SIST EN 15636:2012
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 251, Shower trays
Connecting dimensions EN 13558, Specifications for impact modified extruded acrylic sheets for shower trays for domestic purposes 3 Terms and definitions
For the purposes of this document the following terms and definitions apply. 3.1 domestic purposes use in homes, hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required 4 Requirements 4.1 General The manufacturer shall provide instructions for installation and care with each shower tray.
The shower tray shall be free from sharp edges that would be exposed after the installation of the shower tray in accordance with the manufacturer's instructions. 4.2 Material The shower tray shall be manufactured from impact modified extruded acrylic sheet complying with EN 13558. 4.3 Surface appearance When the shower tray is visually inspected under strong and oblique illumination there shall be no evidence of cracks, chips, or other surface defects, such as unexpected changes in colours, etc., that will impair the appearance or performance of the shower tray. 4.4 Waste outlet hole The shower tray shall have at least one outlet hole. The dimensions of the waste outlet hole and the clearance around the waste outlet hole shall either be in accordance with the requirements of EN 251 or the manufacturer shall supply or recommend a suitable waste outlet fitting. SIST EN 15636:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.