Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal

This standard defines the general requirements for the determination of strength of structural adhesives by testing in peel metal to metal  joints, at ambient or other temperatures.
This method is not suitable for adhesives having an average peeling strength of less than 30 N per 25 mm.

Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Strukturelle Klebstoffsysteme - Prüfverfahren - Teil 2: Rollen-Schälversuch Metall-Metall

Diese Norm legt allgemeine Anforderungen fest zur Bestimmung des Schälwiderstandes von strukturellen Klebstoffen im Rollen-Schälversuch Metall-Metall bei Raum- oder anderen Temperaturen.
Dieses Verfahren eignet sich nicht für Klebstoffe, deren Schälwiderstand kleiner als 30 N je 25 mm ist.

Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 2 : Essai de pelage métal-métal

Aeronavtika – Nekovinski materiali – Konstrukcijska lepila – Preskusna metoda – 2. del: Luščilni preskus kovina-kovina

General Information

Status
Published
Publication Date
25-Oct-2005
Withdrawal Date
29-Apr-2006
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
26-Oct-2005
Completion Date
26-Oct-2005

Relations

Buy Standard

Standard
EN 2243-2:2006
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metalSérie aérospatiale - Matériaux non-métalliques - Systeme d'adhésifs structuraux - Méthodes d'essai - Partie 2 : Essai de pelage métal-métalLuft- und Raumfahrt - Nichtmetallische
Werkstoffe - Strukturelle Klebstoffsysteme - Prüfverfahren - Teil 2: Rollen-Schälversuch Metall-MetallTa slovenski standard je istoveten z:EN 2243-2:2005SIST EN 2243-2:2006en49.025.50ICS:SLOVENSKI
STANDARDSIST EN 2243-2:200601-julij-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2243-2October 2005ICS 49.025.50Supersedes EN 2243-2:1991
English VersionAerospace series - Non-metallic materials - Structural adhesives- Test method - Part 2: Peel metal-metalSérie aérospatiale - Matériaux non-métalliques - Systèmed'adhésifs structuraux - Méthodes d'essai - Partie 2 : Essaide pelage métal-métalLuft- und Raumfahrt - Nichtmetallische
Werkstoffe -Strukturelle Klebstoffsysteme - Prüfverfahren - Teil 2:Rollen-Schälversuch Metall-MetallThis European Standard was approved by CEN on 26 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2243-2:2005: E

1) Published as AECMA Prestandard at the date of publication of this standard.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.