Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain

This standard defines the general requirements for the determination of shear stress and shear strain behaviour of structural adhesives by testing in tension metal to metal lap joints, at ambient or other temperatures.
This method can also be used to investigate the influence of environmental exposures on structural adhesives.

Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Strukturelle Klebstoffe - Prüfverfahren - Teil 6: Bestimmung der Schubspannung und Gleitung

Diese Norm legt allgemeine Anforderungen fest zur Bestimmung des Verhaltens von strukturellen Klebstoffen unter Schubspannung und Gleitung im Zugversuch an überlappten Ganzmetallklebungen bei Raum- oder anderen Temperaturen.
Dieses Verfahren kann auch zur Untersuchung des Einflusses von Umweltbedingungen auf strukturelle Klebstoffe angewandt werden.

Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 6 : Détermination de la contrainte et de la déformation de cisaillement

Aeronavtika – Nekovinski materiali – Konstrukcijska lepila – Preskusna metoda – 6. del: Določanje strižne napetosti in strižne deformacije

General Information

Status
Published
Publication Date
25-Oct-2005
Withdrawal Date
29-Apr-2006
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
26-Oct-2005
Completion Date
26-Oct-2005

Buy Standard

Standard
EN 2243-6:2006
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strainSérie aérospatiale - Matériaux non-métalliques - Systeme d'adhésifs structuraux - Méthodes d'essai - Partie 6 : Détermination de la contrainte et de la déformation de cisaillementLuft- und Raumfahrt - Nichtmetallische
Werkstoffe - Strukturelle Klebstoffe - Prüfverfahren - Teil 6: Bestimmung der Schubspannung und GleitungTa slovenski standard je istoveten z:EN 2243-6:2005SIST EN 2243-6:2006en49.025.50ICS:SLOVENSKI
STANDARDSIST EN 2243-6:200601-julij-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2243-6October 2005ICS 49.025.50 English VersionAerospace series - Non-metallic materials - Structural adhesives- Test method - Part 6: Determination of shear stress and shearstrainSérie aérospatiale - Matériaux non-métalliques - Systèmed'adhésifs structuraux - Méthodes d'essai - Partie 6 :Détermination de la contrainte et de la déformation decisaillementLuft- und Raumfahrt - Nichtmetallische
Werkstoffe -Strukturelle Klebstoffsysteme - Prüfverfahren - Teil 6:Bestimmung der Schubspannung und GleitungThis European Standard was approved by CEN on 26 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2243-6:2005: E

1) Published as AECMA Standard at the date of publication of this standard. 2) Published as AECMA Prestandard at the date of publication of this standard.

angle of measured shear strain (in radians); d shear displacement (in millimetres); t adhesive thickness (in millimetres); F load (in newtons); L length of overlap (in millimetres); W width of overlap (in millimetres); Ge elastic shear modulus (in newtons per square millimetres). 4 Health and safety This standard does not necessarily include all health and safety requirements, associated with its use. Persons using this standard shall be familiar with normal laboratory/test house practices. It is the responsibility of the user to establish satisfactory health and safety practices and to ensure conformity with any European, national or local laws/regulations. 5 Principle/Technique Not applicable 6 Resources 6.1 Apparatus All test equipment shall be calibrated at intervals not exceeding 12 months. 6.1.1 Tensile testing machine The tensile testing machine shall conform to class 1 of EN ISO 7500-1. The failing load of the test specimen shall be within 20 % and 80 % of the upper limit of the selected loading range of the machine. 6.1.2 Suspension In order to obtain moment-free load application, a Cardanic suspension is required (see Figure 1). 6.1.3 Extensometers They shall meet the following requirements:  accuracy of test piece displacement measurement to within 0,001 mm;  measurement of test piece overlap displacement (example of three point measurement is shown in Figures 1 and 2);
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.