EN 764-4:2002

Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials

This Part of the European Standard specifies the requirements for the establishment of the technical delivery conditions in form of: - European material Standard; - European approval for material (EAM); - Particular material appraisal; for metallic materials for pressure equipment in all product forms. When properties specific to an application are relevant, e.g. creep, reference should also be made to the appropriate product standard.

Druckgeräte - Teil 4: Erstellung von technischen Lieferbedingungen für metallische Werkstoffe

Dieser Anhang legt die Anforderungen für die Festlegung der technischen Lieferbedingungen als: - Europäische Werkstoffnorm; - Europäische Werkstoffzulassung (EAM); - Werkstoff-Einzelgutachten; für metallische Werkstoffe für Druckgeräte in allen Erzeugnisformen fest. Wenn Eigenschaften für eine bestimmte Anwendung relevant sind, z.B. Kriechen, sollte der Verweis auf entsprechende Normen gemacht werden.

Equipements sous pression - Partie 4: Etablissement des conditions techniques de livraison des matériaux métalliques

La présente partie de la Norme européenne spécifie les exigences relatives à l'établissement des conditions techniques de livraison sous forme de: - norme européenne de matériaux, - approbation européenne de matériaux (EAM), - évaluation particulière de matériaux, pour les matériaux métalliques destinés aux équipements sous pression sous toutes les formes de produits. Lorsque certaines propriétés spécifiques à une application sont pertinentes, par exemple le fluage, il convient de faire également référence à la norme de produit correspondante.

Tlačna oprema - 4. del: Strokovne podlage in pogoji za dobavo kovinskih materialov

General Information

• Status: Withdrawn
• Publication Date: 15-Oct-2002
• Withdrawal Date: 16-Dec-2014
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• Technical Committee: CEN/TC 54 - Unfired pressure vessels
• Drafting Committee: CEN/TC 54/WG 52 - B - Material selection
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Dec-2014
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 764-4:2003 - Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials

Relations

• Replaced By: EN 764-4:2014 - Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
• Effective Date: 24-Dec-2014
• Parent: EN 13445-2:2002 - Unfired pressure vessels - Part 2: Materials
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 764-4:2003
01-december-2003
7ODþQDRSUHPDGHO6WURNRYQHSRGODJHLQSRJRML]DGREDYRNRYLQVNLK
PDWHULDORY
Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic
materials
Druckgeräte - Teil 4: Erstellung von technischen Lieferbedingungen für metallische
Werkstoffe
Equipements sous pression - Partie 4: Etablissement des conditions techniques de
livraison des matériaux métalliques
Ta slovenski standard je istoveten z: EN 764-4:2002
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 764-4:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 764-4:2003

---------------------- Page: 2 ----------------------

SIST EN 764-4:2003
EUROPEAN STANDARD
EN 764-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2002
ICS 23.020.30
English version
Pressure equipment - Part 4: Establishment of technical delivery
conditions for metallic materials
Equipements sous pression - Partie 4: Etablissement des Druckgeräte - Teil 4: Erstellung von technischen
conditions techniques de livraison des matériaux Lieferbedingungen für metallische Werkstoffe
métalliques
This European Standard was approved by CEN on 19 August 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 764-4:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 764-4:2003
EN 764-4:2002 (E)
Contents
page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions, symbols and abbreviations.5
3.1 Terms and Definitions .5
3.2 Symbols and abbreviations .5
4 Types of technical delivery conditions.7
4.1 European Standards for material for pressure equipment.7
4.2 European approvals for materials for pressure equipment .7
4.3 Particular material appraisals for pressure equipment .7
5 Content of technical delivery conditions for materials for pressure equipment .8
5.1 General.8
5.2 Requirements .8
5.3 Testing and inspection.10
5.4 Marking .11
Annex A (normative) Procedures for the establishment of European Approvals for
...