prEN 1848-1

Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing

This document specifies a method for the determination of the length, width and straightness of bitumen sheets for roof waterproofing.

Abdichtungsbahnen - Bestimmung der Länge, Breite und Geradheit - Teil 1: Bitumenbahnen für Dachabdichtungen

Dieses Dokument legt ein Verfahren zur Bestimmung der Länge, Breite und Geradheit von Bitumenbahnen für Dachabdichtungen fest.

Feuilles souples d'étanchéité - Détermination de la longueur, de la largeur et de la rectitude - Partie 1: Feuilles d'étanchéité de toiture bitumineuses

Ce document spécifie une méthode pour la détermination de la longueur, de la largeur et de la rectitude des feuilles de bitume destinées à l'étanchéité des toitures.

Hidroizolacijski trakovi - Določevanje dolžine, širine in ravnosti - 1. del: Bitumenski trakovi za tesnjenje streh

General Information

• Status: Not Published
• Publication Date: 02-Jul-2025
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 254 - Flexible sheets for water proofing
• Drafting Committee: CEN/TC 254/SC 1 - Bitumen sheets
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 23-Nov-2023
• Due Date: 09-May-2024
• Completion Date: 23-Nov-2023
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Ref Project: oSIST prEN 1848-1:2023 - Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing

Relations

• Revises: EN 1848-1:1999 - Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing
• Effective Date: 29-Mar-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2023
Hidroizolacijski trakovi - Določevanje dolžine, širine in ravnosti - 1. del: Bitumenski
trakovi za tesnjenje streh
Flexible sheets for waterproofing - Determination of length, width and straightness - Part
1: Bitumen sheets for roof waterproofing
Abdichtungsbahnen - Bestimmung der Länge, Breite und Geradheit - Teil 1:
Bitumenbahnen für Dachabdichtungen
Feuilles souples d'étanchéité - Détermination de la longueur, de la largeur et de la
rectitude - Partie 1: Feuilles d'étanchéité de toiture bitumineuses
Ta slovenski standard je istoveten z: prEN 1848-1
ICS:
91.060.20 Strehe Roofs
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2023
ICS 91.100.50 Will supersede EN 1848-1:1999
English Version
Flexible sheets for waterproofing - Determination of
length, width and straightness - Part 1: Bitumen sheets for
roof waterproofing
Feuilles souples d'étanchéité - Détermination de la Abdichtungsbahnen - Bestimmung der Länge, Breite
longueur, de la largeur et de la rectitude - Partie 1: und Geradheit - Teil 1: Bitumenbahnen für
Feuilles d'étanchéité de toiture bitumineuses Dachabdichtungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 254.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1848-1:2023 E
worldwide for CEN national Members.

Contents
Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
5.1 Length. 4
5.2 Width . 4
5.3 Straightness . 5
6 Sampling and preparation of test specimens . 5
6.1 Sampling . 5
6.2 Conditioning of specimens . 5
7 Procedure . 5
7.1 General. 5
7.2 Determination of length . 5
7.3 Determination of width . 5
7.4 Determination of straightness . 5
8 Expression of results . 6
8.1 Results for the determination of length . 6
8.2 Results for the determination of width .
...