EN 2944:2018

Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004

This document specifies the characteristics of inserts, self locking, helical coil, tanged insertion drive, screw thread in NI PH2801, for aerospace applications.
Maximum test temperature: 350 °C.

Luft- und Raumfahrt - Draht-Gewindeeinsätze, selbstsichernd aus korrosionsbeständigem Stahl FE-PA3004

Dieses Dokument legt die Eigenschaften von selbstsichernden Draht Gewindeeinsätzen, Einbau mit Mitnehmerzapfen, aus FE-PA3004 für Anwendungen in der Luft  und Raumfahrt fest.
Maximale Prüftemperatur: 350 °C.

Série aérospatiale - Filets rapportés, à freinage interne, en acier résistant à la corrosion FE-PA3004

Le présent document spécifie les caractéristiques des filets rapportés, à freinage interne, à enroulement hélicoïdal, avec entraînement d'insertion à queue, en FE-PA3004, pour les applications aérospatiales.
Température maximale d’essai : 350 °C

Aeronavtika - Vložki s spiralnim navojem, samozapiralni, iz korozijsko odpornega jekla FE-PA3004

Ta evropski standard določa značilnosti vložkov, varnostnih mehanizmov, vijačnih tuljav, pogona s stičnim vložkom in navoje vijakov iz NI-PH2801 za uporabo v aeronavtiki. Najvišja preskusna temperatura: 350 °C

General Information

• Status: Published
• Publication Date: 17-Apr-2018
• Withdrawal Date: 30-Oct-2018
• ICS: 49.030.30 - Nuts
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3/S 2 - Fasteners
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-Apr-2018
• Completion Date: 18-Apr-2018
• Ref Project: SIST EN 2944:2018 - Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004

Relations

• Replaces: EN 2944:1998 - Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
• Effective Date: 08-Jun-2022
• Revised: FprEN 2944 - Aerospace series - Insert, MJ screw thread, helical coil, self-locking, in corrosion resisting steel FE-PA3004
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2018
1DGRPHãþD
SIST EN 2944:2001
Aeronavtika - Vložki s spiralnim navojem, samozapiralni, iz korozijsko odpornega
jekla FE-PA3004
Aerospace series - Inserts, screw thread, helical coil, self-locking, in corrosion resisting
steel FE-PA3004
Luft- und Raumfahrt - Draht-Gewindeeinsätze, selbstsichernd aus
korrosionsbeständigem Stahl FE-PA3004
Série aérospatiale - Filets rapportés, à freinage interne, en acier résistant à la corrosion
FE-PA3004
Ta slovenski standard je istoveten z: EN 2944:2018
ICS:
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2944
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2018
EUROPÄISCHE NORM
ICS 49.030.30 Supersedes EN 2944:1998
English Version
Aerospace series - Inserts, screw thread, helical coil, self-
locking, in corrosion resisting steel FE-PA3004
Série aérospatiale - Filets rapportés, à freinage interne, Luft- und Raumfahrt - Draht-Gewindeeinsätze,
en acier résistant à la corrosion FE-PA3004 selbstsichernd aus korrosionsbeständigem Stahl FE-
PA3004
This European Standard was approved by CEN on 8 February 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2944:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Required characteristics . 5
3.1 Configuration — Dimensions — Tolerances — Masses . 5
3.2 Material . 5
3.3 Material identification . 5
4 Designation. 9
5 Marking . 9
6 Technical specification . 9

European foreword
This document (EN 2944:2018) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2018, and conflicting national standards shall
be withdrawn at the latest by October 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any o
...