EN ISO 14582:2013

Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)

ISO 14582:2013 specifies hexalobular socket countersunk head bolts and screws with high head (full loadability), of product grade A, and thread diameters from M3 up to and including M10 and property classes 4.8, 8.8 and 10.9.

Mechanische Verbindungselemente - Senkschrauben mit Innensechsrund, hoher Kopf (ISO 14582:2013)

Diese Internationale Norm legt die Eigenschaften von Senkschrauben mit Innensechsrund und hohem Kopf (volle Belastbarkeit) in Produktklasse A mit Gewinden von M3 bis einschließlich M10 und den Festigkeits-klassen 4.8, 8.8 und 10.9 fest.
ANMERKUNG 1   Im Vergleich zu gewöhnlichen ISO-Senkköpfen wurde der Kopf geringfügig erhöht, um Schrauben mit voller Belastbarkeit in Übereinstimmung mit den in ISO 898 1 festgelegten mechanischen Eigenschaften zu erhalten.
Diese Internationale Norm legt auch Lehrenmaße zur Überprüfung der Kopfgeometrie fest.
ANMERKUNG 2   Durch die größere Kopfhöhe sind diese Schrauben nicht vollständig mit anderen metrischen ISO-Senkschrauben austauschbar. Die zu verbindenden Teile benötigen zudem eine geringfügig tiefere Senkung als in ISO 15065 festgelegt.
Werden in besonderen Fällen andere als in dieser Internationalen Norm aufgeführte Festlegungen benötigt, können diese aus bestehenden Internationalen Normen wie zum Beispiel ISO 261, ISO 888, ISO 898 1, ISO 965 2 und ISO 4759 1 ausgewählt werden.

Éléments de fixation - Vis à tête fraisée à six lobes internes, tête haute (ISO 14582:2013)

L'ISO 14582:2013 spécifie les vis à tête fraisée à six lobes internes avec une tête haute (capacité de charge intégrale), de grade A, de diamètre de filetage M3 à M10 inclus, et de classes de qualité 4.8, 8.8 et 10.9.

Vezni elementi - Notranji šestrogeljnik v ugrezni glavi vijaka, visoka glava (ISO 14582:2013)

Ta mednarodni standard določa notranje šestrogeljnike v ugrezni glavi vijakov z visoko glavo (polna obremenljivost) v razredu izdelave A in s premeri navojev od M3 do vključno M10 ter razredov trdnosti 4.8, 8.8 in 10.9. Ta mednarodni standard določa tudi dimenzije merilnikov za nadzor dimenzij glave. Če so v posebnih primerih zahtevane specifikacije, ki niso navedene v tem mednarodnem standardu, jih je mogoče izbrati iz obstoječih mednarodnih standardov, na primer standardov ISO 261, ISO 888, ISO 898-1, ISO 965-2 in ISO 4759-1.

General Information

• Status: Published
• Publication Date: 17-Sep-2013
• Withdrawal Date: 30-Mar-2014
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-Sep-2013
• Completion Date: 18-Sep-2013
• Ref Project: SIST EN ISO 14582:2014 - Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14582:2014
01-julij-2014
Vezni elementi - Notranji šestrogeljnik v ugrezni glavi vijaka, visoka glava (ISO
14582:2013)
Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)
Mechanische Verbindungselemente - Senkschrauben mit Innensechsrund, hoher Kopf
(ISO 14582:2013)
Éléments de fixation - Vis à tête fraisée à six lobes internes, tête haute (ISO 14582:2013)
Ta slovenski standard je istoveten z: EN ISO 14582:2013
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 14582:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14582:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 14582:2014


EUROPEAN STANDARD
EN ISO 14582

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2013
ICS 21.060.10
English Version
Fasteners - Hexalobular socket countersunk head screws, high
head (ISO 14582:2013)
Éléments de fixation - Vis à tête fraisée à six lobes Mechanische Verbindungselemente - Senkschrauben mit
internes, tête haute (ISO 14582:2013) Innensechsrund, hoher Kopf (ISO 14582:2013)
This European Standard was approved by CEN on 24 August 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14582:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14582:2014
EN ISO 14582:2013 (E)
Contents
Page
Foreword .3


2

---------------------- Page: 4 ----------------------

SIST EN ISO 14582:2014
EN ISO 14582:2013 (E)
Foreword
This document (EN ISO 14582:2013) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at
the latest by March 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14582:2013 has been approved by CEN as EN ISO 14582:2013 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 14582:2014

---------------------- Page: 6 ----------------------

SIST EN ISO 14582:2014
INTERNATIONAL ISO
STANDARD 14582
First edition
2013-09-15
Fasteners — Hexalobular socket
countersunk head screws, high head
Éléments de fixation — Vis à tête fraisée à six lobes internes, tête haute
Reference number
ISO 14582:2013(E)
©
ISO 2013

---------------------- Page: 7 ----------------------

SIST EN ISO 14582:2014
ISO 14582:2013(E)

COPYRIGHT PROTECTED DOCUM
...