EN 3464:2009
(Main)Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm
This European Standard specifies the requirements relating to:
Titanium alloy TI-P64001 (Ti-6Al-4V)
Annealed
Plate
6 mm < a ≤ 100 mm
for aerospace applications.
Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglüht - Platten - 6 mm < a ≤ 100 mm
Diese Norm legt die Anforderungen an
Titanlegierung TI P64001 (Ti 6Al 4V)
Geglüht
Platten
6 mm < a < oder = 100 mm
für die Anwendung in der Luft und Raumfahrt fest.
Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Plaques - 6 mm < a ≤ 100 mm
Aeronavtika - Titanova zlitina TI-P64001 (Ti-6Al-4V) - Žarjena - Plošča - 6 mm < a ≤ 100 mm
Ta evropski standard določa zahteve, ki se nanašajo na: titanovo zlitino TI-P64001 (Ti-6Al-4V), žarjena plošča 6 mm < a ≤ 100 mm.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.49.025.30TitanTitaniumICS:Ta slovenski standard je istoveten z:EN 3464:2009SIST EN 3464:2010en,de01-januar-2010SIST EN 3464:2010SLOVENSKI
STANDARD
SIST EN 3464:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3464
October 2009 ICS 49.025.30 English Version
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Plate - 6 mm < a ≤ 100 mm
Série aérospatiale - Alliage de titane TI-P64001 (Ti-6Al-4V) - Recuit - Plaques - 6 mm < a ≤ 100 mm
Luft- und Raumfahrt - Titanlegierung TI-P64001 (Ti-6Al-4V) - Geglüht - Platten - 6 mm < a ≤ 100 mm This European Standard was approved by CEN on 5 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3464:2009: ESIST EN 3464:2010
EN 3464:2009 (E) 2 Foreword This document (EN 3464:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2010, and conflicting national standards shall be withdrawn at the latest by April 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3464:2010
EN 3464:2009 (E) 3 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-4. SIST EN 3464:2010
EN 3464:2009 (E) 4 1 Scope This European Standard specifies the requirements relating to: Titanium alloy TI-P64001 (Ti-6Al-4V) Annealed Plate 6 mm < a ≤ 100 mm for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3114-003, Aerospace series — Test method — Microstructure of (. + ) titanium alloy wrought products — Part 003: Microstructure of plate EN 4050-4, Aerospace series — Test method for metallic materials — Ultrasonic inspection of bars, plates, forging stock and forgings — Part 4: Acceptance criteria1) EN 4800-001, Aerospace series — Titanium and titanium alloys — Technical specification — Part 001: Plate, sheet and strip2)
EN ISO 643, Steels — Micrographic determination of the apparent grain size (ISO 643:2003)
1) Published as ASD Prestandard at the date of publication of this standard. 2) Published as ASD Prestandard at the date of publication of this standard. SIST EN 3464:2010
EN 3464:2009 (E) 5
1 Material designation Titanium alloy TI-P64001 (Ti-6Al-4V) 2 Chemical composition % Element Al V O+2N N H C Fe Others a Ti Each Total min. 5,50 3,50
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.