EN ISO 7051:2011

Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)

ISO 7051:2011 specifies the characteristics of cross-recessed raised countersunk (oval) head tapping screws with thread sizes from ST 2,2 to ST 9,5 inclusive.

Linsensenk-Blechschrauben mit Kreuzschlitz (ISO 7051:2011)

Diese Internationale Norm legt die Eigenschaften von Linsensenk-Blechschrauben mit Kreuzschlitz mit
Gewindegrößen von ST 2,2 bis einschließlich ST 9,5 fest.

Vis à tôle à tête fraisée bombée à empreinte cruciforme (ISO 7051:2011)

L'ISO 7051:2011 spécifie les caractéristiques des vis à tôle à tête fraisée bombée à empreinte cruciforme, de diamètre de filetage ST 2,2 à ST 9,5 inclus.

Pločevinski vijaki z lečasto ugrezno glavo in križno zarezo (ISO 7051:2011)

Ta mednarodni standard določa značilnosti pločevinskih vijakov z lečasto ugrezno glavo in križno zarezo z velikostjo navojev od ST 2,2 do vključno ST 9,5.

General Information

• Status: Published
• Publication Date: 31-Jul-2011
• Withdrawal Date: 31-Jan-2012
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Aug-2011
• Completion Date: 01-Aug-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 7051:2011 - Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)

Relations

• Replaces: EN ISO 7051:1994 - Cross recessed raised countersunk (oval) head tapping screws (ISO 7051:1983)
• Effective Date: 06-Aug-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Linsensenk-Blechschrauben mit Kreuzschlitz (ISO 7051:2011)Vis à tôle à tête fraisée bombée à empreinte cruciforme (ISO 7051:2011)Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)21.060.10Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN ISO 7051:2011SIST EN ISO 7051:2011en,fr,de01-november-2011SIST EN ISO 7051:2011SLOVENSKI
STANDARDSIST EN ISO 7051:19961DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 7051
August 2011 ICS 21.060.10 Supersedes EN ISO 7051:1994English Version
Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011)
Vis à tôle à tête fraisée bombée à empreinte cruciforme (ISO 7051:2011)
Linsensenk-Blechschrauben mit Kreuzschlitz (ISO 7051:2011) This European Standard was approved by CEN on 1 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 7051:2011: ESIST EN ISO 7051:2011

Reference numberISO 7051:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO7051Second edition2011-08-01Cross-recessed raised countersunk (oval) head tapping screws Vis à tôle à tête fraisée bombée à empreinte cruciforme
ISO 7051:2011(E)
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 7051:2011(E) © ISO 2011 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to
...