EN 3375-011:2017
(Main)Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Light weight - Type KL - Product standard
Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Light weight - Type KL - Product standard
This European Standard specifies the dimensions, tolerances, required characteristics and the mass of an AWG 24 shielded quad cable, type KL, intended for high speed (100 Mbit/s) full duplex Ethernet networks.
Linked to this particular application, the operating temperatures of the cable are between - 65 °C and 125 °C.
This cable is laser markable, this marking satisfies the requirements of EN 3838.
The characteristics impedance must be 100 Ω +- 15 Ω.
Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 011: Einfach geschirmt - Sternvierer 100 Ohm - Leichtbauweise - Typ KL - Produktnorm
Diese Europäische Norm legt die Maße, die Grenzabmaße, die Anforderungen und die Masse eines AWG 24-Quadkabels, einfach geschirmt, Typ KL, für schnelle Duplex Ethernet Netze (100 Mbit/s) fest.
Für diesen speziellen Anwendungsfall liegen die Betriebstemperaturen der Leitungen zwischen −65 °C und 125 °C.
Diese Leitung ist Laser bedruckbar, diese Bedruckung entspricht den Anforderungen der EN 3838.
Der Wellenwiderstand muss 100 Ω ± 15 Ω betragen.
Série aérospatiale - Câbles électriques, pour transmission de données numériques - Partie 011 : Simple tresse - Quarte étoile 100 ohms - Allégé - Type KL - Norme de produit
La présente Norme européenne spécifie les dimensions, les tolérances, les caractéristiques requises et la masse du câble blindé à quartes en étoile AWG 24, de type KL, destiné à l’Ethernet grande vitesse (100 Mbit/s) bidirectionnel simultané.
En lien avec cette application spécifique, les températures d’utilisation du câble se situent entre - 65 °C et 125 °C.
Il est possible d’appliquer un marquage au laser sur ce câble. Ce marquage satisfait les exigences de l’EN 3838.
Les caractéristiques d’impédance doivent être 100 Ω +- 15 Ω.
Aeronavtika - Električni kabli za digitalni prenos podatkov - 011. del: Enojni oplet - Štirižilni zvezdasti kabel, 100 ohm - Lahki - Tip KL- Standard za proizvod
Ta evropski standard določa mere, tolerance, zahtevane lastnosti in maso oklopljenega štirižilnega kabla AWG 24 tipa KL, ki je namenjen hitrim (100 Mbit/s) ethernetnim omrežjem s polnim dupleksom.
V povezavi s to uporabo so delovne temperature kabla med −65 °C in 125 °C.
Ta kabel je mogoče označiti z laserjem; oznaka izpolnjuje zahteve standarda EN 3838.
Karakteristična impedanca mora biti 100 Ω ± 15 Ω.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 011: Einfach geschirmt - Sternvierer 100 Ohm - Leichtbauweise - Typ KL - ProduktnormSérie aérospatiale - Câbles électriques, pour transmission de données numériques - Partie 011 : Simple tresse - Quarte étoile 100 ohms - Allégé - Type KL - Norme de produitAerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Light weight - Type KL - Product standard49.060Aerospace electric equipment and systems29.060.20KabliCablesICS:Ta slovenski standard je istoveten z:EN 3375-011:2017SIST EN 3375-011:2017en,fr,de01-junij-2017SIST EN 3375-011:2017SLOVENSKI
STANDARDSIST EN 3375-011:20151DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3375-011
March
t r s y ICS
v {ä r x râ
v {ä r { r Supersedes EN
u u y wæ r s sã t r s wEnglish Version
Aerospace series æ Cableá electrical for digital data transmission æ Part
r s sã Single braid æ Star Quad
s r r ohms æ Light weight æ Type KL æ Product standard Série aérospatiale æ Câbles électriquesá pour transmission de données numériques æ Partie
r s s ã Simple tresse æ Quarte étoile
s r r ohms æ Allégé æ Type KL æ Norme de produit
Luftæ und Raumfahrt æ Elektrische Leitungen für Digitaldatenübertragungen æ Teil
r s sã Einfach geschirmt æ Sternvierer
s r r Ohm æ Leichtbauweise æ Typ KL æ Produktnorm This European Standard was approved by CEN on
x February
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
u u y wæ r s sã t r s y ESIST EN 3375-011:2017
± 15 . 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 3375-001, Aerospace series — Cable, electrical, for digital data transmission — Part 001: Technical specification — Product standard EN 3375-002, Aerospace series — Cable, electrical, for digital data transmission — Part 002: General EN 3475-100 (all parts), Aerospace series — Cable, electrical, aircraft use — Test methods — Part 100: General EN 3838, Aerospace series — Requirements and tests on user-applied markings on aircraft electrical cables EN 9133, Aerospace series — Quality Management Systems — Qualification Procedure for Aerospace Standard Products TR 6058, Aerospace series — Cable code identification list 1) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 3475-100 apply. 4 Required characteristics 4.1 Configuration, dimensions, tolerances and mass The configuration, dimensions and tolerances shall be in accordance with Figure 1 and Table 1. Mass: ≤ 32 g/m.
1) Published as ASD-STAN Technical Report at the date of publication of this standard by AeroSpace and Defence industries Association of Europe - Standardization (ASD-STAN) (www.asd-stan.org) SIST EN 3375-011:2017
NOTE No. of elements in accordance with Table 2 Figure 1 — Configuration, dimensions and tolerances Table 1 — Dimensions, tolerances and general characteristics Stranded conductor (∅A) 0,598 mm ≤ ‡ d 0,656 mm a Insulation diameter (single wire) ‡ d 1,52 mm a Braid, shield Strand diameter: t 0,08 mm Outer diameter of cable (‡B) 4,10 < ∅ < 4,50 mm Colour of the jacket Light blue Colour of components c Pair 1: Red (+), Blue () Pair 2: Yellow (), Green () Minimum bending radius for dynamic installation 10 u Max. outer diameter Minimum bending radius in static 5 u Max. outer diameter a Adapted tools are requested for stripping.
4.2 Material The material and surface treatment shall be in accordance with Table 2. SIST E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.