EN 3914:2008

Aerospace series - Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components

This standard specifies the characteristics of long self locking, thin wall salvage inserts, in NI-PH2601 (NI P100HT), with silver plated internal thread, for aerospace applications.
Maximum test temperature 550 °C.

Luft- und Raumfahrt - Gewindeeinsätze, dünnwandig, selbstsichernd, lang, aus hochwarmfester Nickelbasislegierung NI-PH2601 (NI-P100HT, Inconel 718), Innengewinde versilbert, zur Nacharbeit von Bauteilen

Diese Norm legt die Eigenschaften von selbstsichernden, langen, dünnwandigen Gewindeeinsätzen zur Nacharbeit von Bauteilen, aus NI PH2601 (NI P100HT), mit versilbertem Innengewinde, für die Anwendung in der Luft- und Raumfahrt fest.
Maximale Prüftemperatur 550 °C.

Série aérospatiale - Douilles filetées, à paroi mince, à freinage interne, longues, en alliage résistant à chaud à base de nickel NI-PH2601(NI-P100HT, Inconel 718), argentées sur filetage intérieur, pour récupération

Aeronavtika - Vložki, tanka stena, samozapiralni, dolgi, iz toplotnoodporne zlitine na nikljevi osnovi NI-PH2601 (NI-P100HT, Inconel 718), posrebren notranji navoj, za popravljanje sestavnih delov

General Information

• Status: Published
• Publication Date: 27-May-2008
• Withdrawal Date: 29-Nov-2008
• ICS: 49.030.30 - Nuts
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2017
• Ref Project: SIST EN 3914:2008 - Aerospace series - Insert, thin wall, self-locking, long, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2008
Aeronavtika - Vložki, tanka stena, samozapiralni, dolgi, iz toplotnoodporne zlitine
na nikljevi osnovi NI-PH2601 (NI-P100HT, Inconel 718), posrebren notranji navoj, za
popravljanje sestavnih delov
Aerospace series - Insert, thin wall, self-locking, long, in heat resisting nickel base alloy
NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of
components
Luft- und Raumfahrt - Gewindeeinsätze, dünnwandig, selbstsichernd, lang, aus
hochwarmfester Nickelbasislegierung NI-PH2601 (NI-P100HT, Inconel 718),
Innengewinde versilbert, zur Nacharbeit von Bauteilen
Série aérospatiale - Douilles filetées, à paroi mince, à freinage interne, longues, en
alliage résistant à chaud à base de nickel NI-PH2601(NI-P100HT, Inconel 718),
argentées sur filetage intérieur, pour récupération
Ta slovenski standard je istoveten z: EN 3914:2008
ICS:
49.030.30 Matice Nuts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3914
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 49.030.30
English Version
Aerospace series - Insert, thin wall, self-locking, long, in heat
resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718),
silver plated on internal thread, for salvage of components
Série aérospatiale - Douilles filetées, à paroi mince, à Luft- und Raumfahrt - Gewindeeinsätze, dünnwandig,
freinage interne, longues, en alliage résistant à chaud à selbstsichernd, lang, aus hochwarmfester
base de nickel NI-PH2601(NI-P100HT, Inconel 718), Nickelbasislegierung NI-PH2601 (NI-P100HT, Inconel 718),
argentées sur filetage intérieur, pour récupération Innengewinde versilbert, zur Nacharbeit von Bauteilen
This European Standard was approved by CEN on 29 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3914:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3
Introduction .4
1 Scope.4
2 Normative references.4
3 Required characteristics.5
3.1 Configuration - Dimensions - Tolerances - Masses.5
3.2 Material.5
3.3 Surface treatment.5
4 Designation.6
5 Marking and identification .6
6 Technical specification.6

Foreword
This document (EN 3914:2008) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn
at the latest by November 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/
...