EN 13411-5:2003+A1:2008

Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips

This European Standard has been prepared to provide a means of conforming with the essential safety requirements of the Machinery Directive and associated EFTA Regulations.
Purchasers ordering to this standard are advised to specify in their purchasing contract that the supplier operates a quality assurance system applicable to the relevant part of this standard (e.g. EN ISO 9001) to ensure themselves that products claimed to comply consistently achieve the required level of quality.

Endverbindungen für Drahtseile aus Stahldraht - Sicherheit - Teil 5: Drahtseilklemmen mit U-förmigem Klemmbügel

Diese Europäische Norm legt die Mindestanforderungen an Drahtseilklemmen mit U-förmigem Klemmbügel aus
Eisenwerkstoffen und an die sichere Funktion von Seilendverbindungen mit Drahtseilklemmen mit U-förmigem Klemmbügel entsprechend der vom Hersteller der Drahtseilklemmen vorgesehenen Verwendung fest.
Geeignete Anwendungsfälle sind das Aufhängen statischer Lasten und einmalige Hebevorgänge, die von einer sachkundigen Person unter Berücksichtigung der entsprechenden Sicherheitsfaktoren geprüft wurden.
Drahtseilklemmen mit U-förmigem Klemmbügel sind nicht für die Verwendung bei Spiralseilen geeignet.
Die Verwendung von Drahtseilklemmen mit U-förmigem Klemmbügel als primäre Sicherungsvorrichtungen bei
Förderanlagen im Bergbau, in Seiltrieben von Kränen oder für Endverbindungen bei Anschlagseilen für allgemeine Hebezwecke ist nicht Gegenstand dieser Norm.
Beispiele für Seilklemmen und entsprechende Montageanweisungen sind in den informativen Anhängen A und B angegeben.
Gefährdungen, die in dieser Norm behandelt werden, sind in Abschnitt 4 angegeben.

Terminaisons pour câbles en acier - Sécurité - Partie 5: Serre-câbles à étrier en U

La présente Norme européenne spécifie les prescriptions minimales pour les terminaisons des serre-câbles à étrier
en U fabriqués à partir de matériaux ferreux et pour le comportement sûr des terminaisons à oeil fixées aux
serre-câbles à étrier en U, destinés à l’utilisation prévue par le fabricant du serre-câble.
Parmi les utilisations adaptées figurent la suspension de charges statiques et les opérations de levage ponctuelles
qui ont été évaluées par une personne compétente en tenant compte des facteurs de sécurité appropriés.
Les serre-câbles à étrier en U ne sont pas adaptés à l’utilisation avec les câbles monotorons.
La présente norme ne couvre pas les serre-câbles utilisés comme dispositif principal de retenue sur les monte-charge
de mines, les appareils de levage pour grues ou les terminaisons à oeil pour élingues d’usage courant.
Des exemples de serre-câbles avec les instructions de montage sont donnés dans les annexes informatives A et B.
Les phénomènes dangereux couverts par la présente norme sont identifiés à l’article 4.

Zaključki jeklenih žičnih vrvi - Varnost - 5. del: Vrvne prižemke oblike U (žabice)

General Information

• Status: Published
• Publication Date: 21-Oct-2008
• ICS: 21.060.70 - Clamps and staples
• ICS: 53.020.30 - Accessories for lifting equipment
• Technical Committee: CEN/TC 168 - Chains, ropes, webbing, slings and accessories - safaty
• Drafting Committee: CEN/TC 168/WG 2 - Steel wire ropes, their terminations and wire rope slings
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 03-Jun-2024
• Completion Date: 03-Jun-2024
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 13411-5:2004+A1:2008 - Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips

Relations

• Merged From: EN 13411-5:2003 - Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Endverbindungen für Drahtseile aus Stahldraht - Sicherheit - Teil 5: Drahtseilklemmen mit U-förmigem KlemmbügelTerminaisons pour câbles en acier - Sécurité - Partie 5: Serre-câbles à étrier en UTerminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips77.140.99Drugi železni in jekleni izdelkiOther iron and steel products53.020.30Pribor za dvigalno opremoAccessories for lifting equipmentICS:Ta slovenski standard je istoveten z:EN 13411-5:2003+A1:2008SIST EN 13411-5:2004+A1:2008en,fr01-december-2008SIST EN 13411-5:2004+A1:2008SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13411-5:2003+A1
October 2008 ICS 21.060.70; 53.020.30 Supersedes EN 13411-5:2003 English Version
Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
Terminaisons pour câbles en acier - Sécurité - Partie 5: Serre-câbles à étrier en U
Endverbindungen für Drahtseile aus Stahldraht -Sicherheit - Teil 5: Drahtseilklemmen mit U-förmigem Klemmbügel This European Standard was approved by CEN on 25 March 2003 and includes Amendment 1 approved by CEN on 18 September 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13411-5:2003+A1:2008: ESIST EN 13411-5:2004+A1:2008

Specification for construction and sizes for one design of grip - 1.10 A.1 General.10 A.2 Material.10 A.3 Dimensions.11 Figure A.1 — Wire rope grip.11 Figure A.2 — Bridge.11 Figure A.3 — U-bolt.11 Figure A.4 — Collar nut.11 Table A.1 — Dimensions (see Figures A1, A2, A3 and A4).12 A.4 Fitting instructions.12 Figure A.5 — Spacing for grips.12 Table A.2 — Torque and number of wire rope grips.13 Annex B (informative)
Specification for construction and sizes for one design of grip - 2.14 B.1 General.14 B.2 Material.14 B.3 Dimensions.15 Table B.1 — Dimensions (see Figures B.1, B.2, B.3 and B.4).16 B.4 Fitting instructions.17 Figure B.5 — Sequence of fitting grips.17 Table B.2 — Torque and number of grips.18 Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC"""".19 SIST EN 13411-5:2004+A1:2008

!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""".20 Bibliography.21
Part 7: Symmetric wedge socket
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 13411-5:2004+A1:2008

3.2 grip-secured eye termination grip-secured eye termination: eye termination secured by wire rope grips fitted in accordance with the manufacturer’s instructions 4 List of hazards Accidental release of a load, or release of a load due to failure of a wire rope grip puts at risk either directly or indirectly the safety or health of those persons within the danger zone. Temperature hazard is not covered as in use temperature is limited by the wire rope. Table 1 contains those hazards that require action to reduce risk identified by risk assessment as being specific and significant for wire rope grips. Table 1 — Hazards and associated requirements Hazards identified in annex A of EN 1050:1996 Relevant clause of annex A of EN 292-2:1991 Relevant clause/subclause of this standard 1 Mechanical hazard due to inadequacy of strength 1.3.2 4.1.2.3 4.1.2.5 4.2.4 1.7.3 4.3.1 4.2.4
5 5 6
6 1.7 Puncture hazard 1.3 5 10.4 Errors of fitting hazard 1.5.4 7
...