Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service (ISO/DIS 25457:2022)

ISO 25457:2008 specifies requirements and provides guidance for the selection, design, specification, operation and maintenance of flares and related combustion and mechanical components used in pressure relieving and vapour-depressurizing systems for petroleum, petrochemical and natural gas industries.
Although ISO 25457:2008 is primarily intended for new flares and related equipment, it can also be used in the evaluation of existing flare facilities.
Further guidance and best practices are provided for the selection, specification and mechanical details for flares and on the design, operation and maintenance of flare combustion and related equipment.
ISO 25457:2008 also includes a set of data sheets, together with instructions and guidelines, for use in communicating and recording design information.

Erdöl-, petrochemische und Erdgasindustrie - Fackeln für den allgemeinen Betrieb in Raffinerien und petrochemischen Service (ISO/DIS 25457:2022)

Industries du pétrole, de la pétrochimie et du gaz naturel - Détails sur les torches d'usage général dans les raffineries et dans les usines pétrochimiques (ISO/DIS 25457:2022)

L'ISO 25457:2008 spécifie les exigences et fournit les lignes directrices pour le choix, la conception, les spécifications, le fonctionnement et la maintenance des torches et des composants mécaniques et de combustion associés utilisés dans les systèmes de dépressurisation et de protection contre les surpressions pour les industries du pétrole, de la pétrochimie et du gaz naturel.
Bien que l'ISO 25457:2008 soit avant tout destinée aux nouvelles torches et aux équipements associés, elle peut aussi être utilisée dans l'évaluation d'installations de torches existantes.
Des lignes directrices complémentaires et les meilleures pratiques sont donnée quant au choix, spécifications et détails d'ordre mécanique relatifs aux torches et sur la conception, le fonctionnement et la maintenance des équipements associés et de combustion des torches.
L'ISO 25457:2008 inclut également un ensemble de fiches techniques, conjointement aux instructions et lignes directrices; afin de les tiliser pour communiquer et enregistrer des informations de conception.

Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina - Podrobnosti o plinskih baklah v rafinerijah in petrokemični industriji (ISO/DIS 25457:2022)

General Information

Status
Not Published
Publication Date
03-Dec-2024
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
19-Jun-2023
Completion Date
19-Jun-2023

Relations

Buy Standard

Draft
prEN ISO 25457:2023
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 25457:2023
01-januar-2023
Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina -
Podrobnosti o plinskih baklah v rafinerijah in petrokemični industriji (ISO/DIS
25457:2022)

Petroleum, petrochemical and natural gas industries - Flare details for general refinery

and petrochemical service (ISO/DIS 25457:2022)

Erdöl-, petrochemische und Erdgasindustrie - Fackeln für den allgemeinen Betrieb in

Raffinerien und petrochemischen Service (ISO/DIS 25457:2022)

Industries du pétrole, de la pétrochimie et du gaz naturel - Détails sur les torches

d'usage général dans les raffineries et dans les usines pétrochimiques (ISO/DIS
25457:2022)
Ta slovenski standard je istoveten z: prEN ISO 25457
ICS:
75.180.20 Predelovalna oprema Processing equipment
oSIST prEN ISO 25457:2023 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 25457:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 25457:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 25457
ISO/TC 67/SC 6 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2022-11-10 2023-02-02
Petroleum, petrochemical and natural gas industries —
Flare details for general refinery and petrochemical
service

Industries du pétrole, de la pétrochimie et du gaz naturel — Détails sur les torches d'usage général dans les

raffineries et dans les usines pétrochimiques
ICS: 75.180.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 25457:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 25457:2023
ISO/DIS 25457:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 25457
ISO/TC 67/SC 6 Secretariat: AFNOR
Voting begins on: Voting terminates on:
Petroleum, petrochemical and natural gas industries —
Flare details for general refinery and petrochemical
service

Industries du pétrole, de la pétrochimie et du gaz naturel — Détails sur les torches d'usage général dans les

raffineries et dans les usines pétrochimiques
ICS: 75.180.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

NOT BE REFERRED TO AS AN INTERNATIONAL

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.

the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below

IN ADDITION TO THEIR EVALUATION AS

or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,

TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 25457:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
© ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 25457:2023
ISO/DIS 25457:2022(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ..................................................................................................................................................................................... 1

3 Terms and definitions .................................................................................................................................................................................... 1

4 Supplements to API 537, 3 edition (2017) ............................................................................................................................ 1

4.1 General requirements ...................................................................................................................................................................... 1

4.2 Limitations for design procedures ....................................................................................................................................... 1

iii
© ISO 2022 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 25457:2023
ISO/DIS 25457:2022(E)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.