EN ISO 16812:2019

Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2019)

This document specifies requirements and gives recommendations for the mechanical design, material selection, fabrication, inspection, testing and preparation for shipment of shell-and-tube heat exchangers for the petroleum, petrochemical and natural gas industries.
This document supplements API Std 660, 9th edition (2015), the requirements of which are applicable with the exceptions specified in this document.
This document is applicable to the following types of shell-and-tube heat exchangers: heaters, condensers, coolers and reboilers.
This document is not applicable to vacuum-operated steam surface condensers and feed-water heaters.

Erdöl-, petrochemische und Erdgasindustrie - Rohrbündelwärmetauscher (ISO 16812:2019)

Industries du pétrole, de la pétrochimie et du gaz naturel - Échangeurs de chaleur à faisceaux (ISO 16812:2019)

Petrokemična industrija ter industrija za predelavo nafte in zemeljskega plina - Toplotni izmenjevalniki za ohišja in cevi (ISO 16812:2019)

Ta dokument podaja zahteve in priporočila v zvezi z mehanskim načrtovanjem, izbiro materialov, izdelavo, nadzorom, pregledom ter pripravo za pošiljanje toplotnih izmenjevalnikov za ohišja in cevi za petrokemično industrijo ter industrijo za predelavo nafte in zemeljskega plina.
Ta dokument dopolnjuje standard API 660, 9. izdaja (2015), katerega zahteve se uporabljajo za izjeme, določene v tem dokumentu.
Ta dokument se uporablja za naslednje tipe toplotnih izmenjevalnikov za ohišja in cevi: grelnike,
kondenzatorje, hladilnike in povrelnike.
Ta dokument se ne uporablja za vakuumske parne površinske kondenzatorje in grelnike dovajalne vode.

General Information

• Status: Published
• Publication Date: 05-Mar-2019
• Withdrawal Date: 29-Sep-2019
• ICS: 27.060.30 - Boilers and heat exchangers
• ICS: 75.180.20 - Processing equipment
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 06-Mar-2019
• Completion Date: 06-Mar-2019
• Ref Project: SIST EN ISO 16812:2019 - Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2019)

Relations

• Replaces: EN ISO 16812:2007 - Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers (ISO 16812:2007)
• Effective Date: 13-Mar-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16812:2019
01-maj-2019
1DGRPHãþD
SIST EN ISO 16812:2007
3HWURNHPLþQDLQGXVWULMDWHULQGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD
7RSORWQLL]PHQMHYDOQLNL]DRKLãMDLQFHYL,62
Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers
(ISO 16812:2019)
Erdöl-, petrochemische und Erdgasindustrie - Röhrenkesselwärmetauscher (ISO
16812:2019)
Industries du pétrole, de la pétrochimie et du gaz naturel - Échangeurs de chaleur à
faisceaux (ISO 16812:2019)
Ta slovenski standard je istoveten z: EN ISO 16812:2019
ICS:
71.120.30 Prenosniki toplote Heat exchangers
75.180.20 Predelovalna oprema Processing equipment
SIST EN ISO 16812:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16812:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 16812:2019


EN ISO 16812
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 27.060.30; 75.180.20 Supersedes EN ISO 16812:2007
English Version

Petroleum, petrochemical and natural gas industries -
Shell-and-tube heat exchangers (ISO 16812:2019)
Industries du pétrole, de la pétrochimie et du gaz Erdöl-, petrochemische und Erdgasindustrie -
naturel - Échangeurs de chaleur à faisceaux (ISO Rohrbündelwärmetauscher (ISO 16812:2019)
16812:2019)
This European Standard was approved by CEN on 9 February 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16812:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16812:2019
EN ISO 16812:2019 (E)
Contents Page
European foreword . 3
Endorsement notice . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 16812:2019
EN ISO 16812:2019 (E)
European foreword
This document (EN ISO 16812:2019) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for
petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2019, and conflicting national standards
shall be withdrawn at the latest by September 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 16812:2007.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text
...