prEN ISO 10874
(Main)Resilient, textile, laminate and modular mechanical locked floor coverings - Classification (ISO/DIS 10874:2026)
- Abstract
ISO 10874:2009 establishes a classification system for resilient, textile, laminate and and modular mechanical locked floor coverings floor coverings. The classification is based on practical requirements for areas of use and intensity of use and is linked to the requirements specified in the relevant International Standard for each type of floor covering.
ISO 10874:2009 is also intended to provide guidance for manufacturers, specifiers and consumers, to enable them to choose the appropriate class of floor covering for any given area of use or specific room.
- Status
- Not Published
- Publication Date
- 02-Apr-2028
- Technical Committee
- CEN/TC 134 - Resilient and textile floor coverings
- Drafting Committee
- CEN/TC 134/WG 10 - Harmonization
- Current Stage
- 4020 - Submission to enquiry - Enquiry
- Start Date
- 10-Sep-2026
- Completion Date
- 10-Sep-2026
Relations
- Effective Date
- 25-Mar-2026
- Effective Date
- 25-Mar-2026
Frequently Asked Questions
prEN ISO 10874 is a draft published by the European Committee for Standardization (CEN). Its full title is "Resilient, textile, laminate and modular mechanical locked floor coverings - Classification (ISO/DIS 10874:2026)". This standard covers: ISO 10874:2009 establishes a classification system for resilient, textile, laminate and and modular mechanical locked floor coverings floor coverings. The classification is based on practical requirements for areas of use and intensity of use and is linked to the requirements specified in the relevant International Standard for each type of floor covering. ISO 10874:2009 is also intended to provide guidance for manufacturers, specifiers and consumers, to enable them to choose the appropriate class of floor covering for any given area of use or specific room.
ISO 10874:2009 establishes a classification system for resilient, textile, laminate and and modular mechanical locked floor coverings floor coverings. The classification is based on practical requirements for areas of use and intensity of use and is linked to the requirements specified in the relevant International Standard for each type of floor covering. ISO 10874:2009 is also intended to provide guidance for manufacturers, specifiers and consumers, to enable them to choose the appropriate class of floor covering for any given area of use or specific room.
prEN ISO 10874 is classified under the following ICS (International Classification for Standards) categories: 97.150 - Floor coverings. The ICS classification helps identify the subject area and facilitates finding related standards.
prEN ISO 10874 has the following relationships with other standards: It is inter standard links to EN ISO 10874:2012, EN ISO 10874:2012/A1:2020. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
prEN ISO 10874 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2026
Elastične, tekstilne, laminatne in modularne mehansko zaklenjene talne obloge -
Razvrščanje (ISO/DIS 10874:2026)
Resilient, textile, laminate and modular mechanical locked floor coverings - Classification
(ISO/DIS 10874:2026)
Elastische, textile, Laminat -und modulare mechanisch verriegelnde Bodenbeläge -
Klassifizierung (ISO/DIS 10874:2026)
Revêtements de sol résilients, textiles, stratifiés et modulaires à verrouillage mécanique -
Classification (ISO/DIS 10874:2026)
Ta slovenski standard je istoveten z: prEN ISO 10874
ICS:
97.150 Talne obloge Floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
International
Standard
ISO/DIS 10874
ISO/TC 219
Resilient, textile, laminate and
Secretariat: NBN
modular mechanical locked floor
Voting begins on:
coverings — Classification
2026-09-08
Revêtements de sol résilients, textiles et stratifiés — Classification
Voting terminates on:
2026-12-01
ICS: 97.150
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document has not been edited by the ISO Central Secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 10874:2026(en)
DRAFT
ISO/DIS 10874:2026(en)
International
Standard
ISO/DIS 10874
ISO/TC 219
Resilient, textile, laminate and
Secretariat: NBN
modular mechanical locked floor
Voting begins on:
coverings — Classification
Revêtements de sol résilients, textiles et stratifiés — Classification
Voting terminates on:
ICS: 97.150
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document has not been edited by the ISO Central Secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2026
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 10874:2026(en)
ii
ISO/DIS 10874:2026(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Explanation of the classification system . 1
5 Classification .
...