EN 3864:2013

Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of modulus of rupture

This European Standard defines the requirements for the determination of the modulus of rupture of glass transparencies for aircraft applications, whether in the annealed or chemically or thermally tempered condition.

Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Transparente Glaswerkstoffe - Prüfverfahren - Bestimmung des Bruchmoduls

Diese Eurpäische Norm legt die Anforderungen für die Bestimmung des Bruchmoduls von transparenten Glaswerkstoffen für Luftfahrzeuganwendungen fest, entweder im entspannten oder im chemisch oder thermisch gespannten Zustand.

Série aérospatiale - Matériaux non-métalliques - Transparents en verre - Méthodes d’essais - Détermination du module de rupture

Aeronavtika - Nekovinski materiali - Prozornost stekla - Preskusne metode - Ugotavljanje modulov lomljivosti

General Information

• Status: Published
• Publication Date: 21-May-2013
• Withdrawal Date: 29-Nov-2013
• ICS: 49.025.99 - Other materials
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-May-2013
• Completion Date: 22-May-2013
• Ref Project: SIST EN 3864:2014 - Aerospace series - Non-metallic materials - Glass transparencies - Test methods - Determination of modulus of rupture

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2014
Aeronavtika - Nekovinski materiali - Prozornost stekla - Preskusne metode -
Ugotavljanje modulov lomljivosti
Aerospace series - Non-metallic materials - Glass transparencies - Test methods -
Determination of modulus of rupture
Luft- und Raumfahrt - Nichtmetallische Werkstoffe - Transparente Glaswerkstoffe -
Prüfverfahren - Bestimmung des Bruchmoduls
Série aérospatiale - Matériaux non-métalliques - Transparents en verre - Méthodes
d’essais - Détermination du module de rupture
Ta slovenski standard je istoveten z: EN 3864:2013
ICS:
49.025.99 Drugi materiali Other materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3864
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2013
ICS 49.025.99
English Version
Aerospace series - Non-metallic materials - Glass
transparencies - Test methods - Determination of modulus of
rupture
Série aérospatiale - Matériaux non-métalliques - Luft- und Raumfahrt - Nichtmetallische Werkstoffe -
Transparents en verre - Méthodes d'essais - Détermination Transparente Glaswerkstoffe - Prüfverfahren - Bestimmung
du module de rupture des Bruchmoduls
This European Standard was approved by CEN on 19 January 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3864:2013: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms, definitions and abbreviations .5
4 Health, safety and environment .5
5 Principle/technique .5
6 Resources .6
7 Test samples/test pieces .6
8 Test procedure .7
9 Expression of results .7
10 Measurement uncertainties .8
11 Designation .8
12 Test report .8

Foreword
This document (EN 3864:2013) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2013, and conflicting national standards shall be withdrawn
at the latest by November 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
EN 3864
...