EN ISO 11303:2008

Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002)

ISO 11303 gives guidance on the selection of methods of protection against atmospheric corrosion of metals and alloys. It is applicable for technical equipment and products made of structural metals and used under atmospheric conditions. In a rational selection of protection methods, the corrosivity of the atmospheric environments is one of the important factors. These guidelines use the atmospheric corrosivity classification defined in ISO 9223.

Korrosion von Metallen und Legierungen - Leitfaden zur Auswahl von Verfahren zum Schutz gegenüber atmosphärischer Korrosion (ISO 11303:2002)

Diese Internationale Norm enthält einen Leitfaden zur Auswahl von Verfahren zum Schutz gegenüber der atmosphärischen Korrosion von Metallen und Legierungen. Sie ist für technische Ausrüstungen und Produkte aus metallischen Konstruktionswerkstoffen anwendbar, die unter atmosphärischen Bedingungen angewendet werden. Bei einer rationalen Auswahl der Schutzverfahren ist die Korrosivität der atmosphärischen Umgebungen einer der wichtigsten Faktoren. In diesem Leitfaden wird die Klassifizierung der atmo¬sphärischen Korrosivität angewendet, die in ISO 9223 definiert ist.

Corrosion des métaux et alliages - Lignes directrices pour le choix des méthodes de protection contre la corrosion atmosphérique (ISO 11303:2002)

L'ISO 11303 fournit des conseils pour le choix des méthodes de protection contre la corrosion atmosphérique des métaux et alliages. Elle est applicable aux équipements et aux produits fabriqués en métaux de construction et utilisés dans des conditions atmosphériques. La corrosivité des environnements atmosphériques est un des facteurs importants du choix rationnel des méthodes de protection. Les présentes lignes directrices utilisent la classification de la corrosivité atmosphérique définie dans l'ISO 9223.

Korozija kovin in zlitin - Smernice za izbiro zaščitnih metod proti atmosferski koroziji (ISO 11303:2002)

General Information

• Status: Published
• Publication Date: 15-Apr-2008
• Withdrawal Date: 30-Oct-2008
• ICS: 77.060 - Corrosion of metals
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 16-Apr-2008
• Completion Date: 16-Apr-2008
• Ref Project: SIST EN ISO 11303:2008 - Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11303:2008
01-julij-2008
.RUR]LMDNRYLQLQ]OLWLQ6PHUQLFH]DL]ELUR]DãþLWQLKPHWRGSURWLDWPRVIHUVNL
NRUR]LML,62
Corrosion of metals and alloys - Guidelines for selection of protection methods against
atmospheric corrosion (ISO 11303:2002)
Korrosion von Metallen und Legierungen - Leitfaden zur Auswahl von Verfahren zum
Schutz gegenüber atmosphärischer Korrosion (ISO 11303:2002)
Corrosion des métaux et alliages - Lignes directrices pour le choix des méthodes de
protection contre la corrosion atmosphérique (ISO 11303:2002)
Ta slovenski standard je istoveten z: EN ISO 11303:2008
ICS:
77.060 Korozija kovin Corrosion of metals
SIST EN ISO 11303:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 11303
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2008
ICS 77.060

English Version
Corrosion of metals and alloys - Guidelines for selection of
protection methods against atmospheric corrosion (ISO
11303:2002)
Corrosion des métaux et alliages - Lignes directrices pour Korrosion von Metallen und Legierungen - Leitfaden zur
le choix des méthodes de protection contre la corrosion Auswahl von Verfahren zum Schutz gegenüber
atmosphérique (ISO 11303:2002) atmosphärischer Korrosion (ISO 11303:2002)
This European Standard was approved by CEN on 21 March 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11303:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 11303:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 3 ----------------------

EN ISO 11303:2008 (E)
Foreword
The text of ISO 11303:2002 has been prepared by Technical Committee ISO/TC 156 “Corrosion of metals and
alloys” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
11303:2008 by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2008, and conflicting national standards shall be withdrawn at
the latest by October 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11303:2002 has been approved by CEN as a EN ISO 11303:2008 without any modification.

3

---------------------- Page: 4 ----------------------

INTERNATIONAL ISO
STANDARD 11303
First edition
2002-11-01
Corrosion of metals and alloys —
Guidelines for selection of protection
methods against atmospheric corrosion
Corrosion des métaux et alliages — Lignes directrices pour le choix des
méthodes de protection contre la corrosion atmosphérique

Reference number
ISO 11303:2002(E)
© ISO 2002

---------------------- Page: 5 ----------------------

ISO
...