EN 2882:2006

Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

This standard specifies characteristics for hexagon nuts, with counterbore and captive washer, with a self-locking feature achieved by forming the upper portion out-of-round, in steel, cadmium plated, MoS2 lubricated, classification 1 100 MPa  ) / 235 °C .

Luft-und Raumfahrt - Sechskantmuttern, selbstsichernd, mit Aussenkung und Bördelscheibe, aus Stahl, verkadmet, MoS2 geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 235 °C

Diese Norm legt die Eigenschaften von Sechskantmuttern mit Aussenkung, Bördelscheibe und einer durch Verformung des oberen Teils erzeugten Selbstsicherung, aus Stahl, verkadmet, MoS2 geschmiert, Klasse: 1 100 MPa ) / 235 °C ), fest.

Série aérospatiale - Ecrous hexagonaux, à freinage interne, avec chambrage et rondelle captive, en acier, cadmiés, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante) / 235 °C

Aeronavtika - Matice, šestrobe, samozapiralne, z ugreznjeno in robljeno podložko, iz jekla, prevlečene s kadmijem, namazane z MoS2 - Klasifikacija: 1100 MPa (pri temperaturi okolice)/235 °C

General Information

• Status: Withdrawn
• Publication Date: 18-Jul-2006
• Withdrawal Date: 21-Nov-2023
• ICS: 49.030.30 - Nuts
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Ref Project: SIST EN 2882:2009 - Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

Relations

• Replaced By: EN 2882:2023 - Aerospace series - Nut, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
• Effective Date: 23-Sep-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft-und Raumfahrt - Sechskantmuttern, selbstsichernd, mit Aussenkung und Bördelscheibe, aus Stahl, verkadmet, MoS2 geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 235 °CSérie aérospatiale - Ecrous hexagonaux, à freinage interne, avec chambrage et rondelle captive, en acier, cadmiés, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante) / 235 °CAerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 2882:2006SIST EN 2882:2009en,de01-junij-2009SIST EN 2882:2009SLOVENSKI
STANDARD



SIST EN 2882:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2882
July 2006 ICS 49.030.30 English Version
Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 235 °C
Série aérospatiale - Ecrous hexagonaux, à freinage interne, avec chambrage et rondelle captive, en acier, cadmiés, lubrifiés MoS2 - Classification : 1 100 MPa (à température ambiante) / 235 °C
Luft-und Raumfahrt - Sechskantmuttern, selbstsichernd, mit Aussenkung und Bördelscheibe, aus Stahl, verkadmet, MoS2 geschmiert - Klasse: 1 100 MPa (bei Raumtemperatur) / 235 °C This European Standard was approved by CEN on 20 April 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2882:2006: ESIST EN 2882:2009



EN 2882:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Required characteristics.5 4 Designation.7 5 Marking.7 6 Technical specification.7
SIST EN 2882:2009



EN 2882:2006 (E) 3 Foreword This European Standard (EN 2882:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at the latest by January 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to
...