prEN 3745-510

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test

This document specifies a method of determining the attenuation variation of an optical cable during mechanical bending under load at the maximum and minimum operating temperatures.

Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 510: Biegetest

No Scope available

Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 510 : Essai de courbure

Le présent document spécifie une méthode de détermination de la variation d'atténuation d'un câble optique pendant une courbure mécanique sous charge aux températures d’utilisation minimale et maximale.

Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 510. del: Upogibni preskus

General Information

• Status: Not Published
• Publication Date: 24-Aug-2025
• ICS: 49.060 - Aerospace electric equipment and systems
• ICS: 49.090 - On-board equipment and instruments
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 10 - Optical
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 16-May-2024
• Completion Date: 16-May-2024
• Ref Project: oSIST prEN 3745-510:2024 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test

Relations

• Revises: EN 3745-510:2017 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test
• Effective Date: 05-Jul-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2024
Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne
metode - 510. del: Upogibni preskus
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510:
Bending test
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil
510: Biegetest
Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais
- Partie 510: Essai de courbure
Ta slovenski standard je istoveten z: prEN 3745-510
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2024
ICS 49.060 Will supersede EN 3745-510:2017
English Version
Aerospace series - Fibres and cables, optical, aircraft use -
Test methods - Part 510: Bending test
Série aérospatiale - Fibres et câbles optiques à usage Luft- und Raumfahrt - Faseroptische Leitungen für
aéronautique - Méthodes d'essais - Partie 510 : Essai Luftfahrzeuge - Prüfverfahren - Teil 510: Biegetest
de courbure
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3745-510:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Preparation of specimens . 4
4.1 General. 4
4.2 Method A . 4
4.3 Method B . 5
5 Apparatus . 5
5.1 Method A . 5
5.2 Method B . 6
6 Methods . 8
6.1 Method A . 8
6.2 Method B . 8
Bibliography . 8

European foreword
This document (prEN 3745-510:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently subm
...