EN 2823:2017
(Main)Aerospace series - Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics
Aerospace series - Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics
This European Standard specifies the method for determining the effect of exposure to a humid atmosphere on the physical and mechanical characteristics of fibre reinforced plastics.
This standard applies to all laminates, whatever the nature of the reinforcement and organic matrix used, unless otherwise indicated in the material standard and/or technical specification.
Luft- und Raumfahrt - Faserverstärkte Kunststoffe - Ermittlung des Einflusses der Auslagerung in feuchtem Klima auf die mechanischen und physikalischen Eigenschaften
Diese Europäische Norm legt das Verfahren zur Ermittlung des Einflusses der Auslagerung in feuchtem Klima auf die physikalischen und mechanischen Eigenschaften faserverstärkter Kunststoffe fest.
Sofern nicht anders in der Werkstoffnorm und/oder den Technischen Lieferbedingungen angegeben, gilt diese Norm unabhängig von der Verstärkungsart und dem verwendeten organischen Matrixsystem für alle Laminate.
Série aérospatiale - Plastiques renforcés de fibres - Détermination de l'influence de l'exposition à l'atmosphère humide sur les caractéristiques mécaniques et physiques
La présente Norme européenne spécifie la méthode de détermination de l’influence de l’exposition à l’atmosphère humide (vieillissement humide) sur les caractéristiques mécaniques et physiques des matériaux plastiques renforcés de fibres.
La présente norme s’applique à tous les stratifiés, quelle que soit la nature du renfort et le système de matrice organique utilisé, sauf mention particulière de la norme de matériau et/ou de la spécification technique.
Aeronavtika - Z vlakni ojačeni polimerni materiali - Ugotavljanje učinkov vlažne atmosfere na njihove fizične in mehanske karakteristike
Ta evropski standard določa metodo za ugotavljanje učinkov vlažne atmosfere na fizične in mehanske karakteristike z vlakni ojačenih polimernih materialov.
Ta standard se uporablja za vse laminate, ne glede na naravo uporabljene armature in organske matrike, če ni drugače navedeno v standardu za material in/ali tehničnih specifikacijah.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 2823:2017
01-maj-2017
$HURQDYWLND=YODNQLRMDþHQLSROLPHUQLPDWHULDOL8JRWDYOMDQMHXþLQNRYYODåQH
DWPRVIHUHQDQMLKRYHIL]LþQHLQPHKDQVNHNDUDNWHULVWLNH
Aerospace series - Fibre reinforced plastics - Determination of the effect of exposure to
humid atmosphere on physical and mechanical characteristics
Luft- und Raumfahrt - Faserverstärkte Kunststoffe - Ermittlung des Einflusses der
Auslagerung in feuchtem Klima auf die mechanischen und physikalischen Eigenschaften
Série aérospatiale - Plastiques renforcés de fibres - Détermination de l'influence de
l'exposition à l'atmosphère humide sur les caractéristiques mécaniques et physiques
Ta slovenski standard je istoveten z: EN 2823:2017
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
SIST EN 2823:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 2823:2017
---------------------- Page: 2 ----------------------
SIST EN 2823:2017
EN 2823
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2017
EUROPÄISCHE NORM
ICS 49.025.40
English Version
Aerospace series - Fibre reinforced plastics -
Determination of the effect of exposure to humid
atmosphere on physical and mechanical characteristics
Série aérospatiale - Plastiques renforcés de fibres - Luft- und Raumfahrt - Faserverstärkte Kunststoffe -
Détermination de l'influence de l'exposition à Ermittlung des Einflusses der Auslagerung in feuchtem
l'atmosphère humide sur les caractéristiques Klima auf die mechanischen und physikalischen
mécaniques et physiques Eigenschaften
This European Standard was approved by CEN on 6 February 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2823:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 2823:2017
EN 2823:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Methodology . 5
5 Apparatus. 5
6 Specimens . 5
7 Procedure . 7
8 Expression of results. 10
9 Designation . 11
10 Test report .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.