prEN 4165-018

Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 018: Protective cover for 1, 2 and 4 module receptacles series 2 and 3 - Product standard

This document specifies the protective cover for all receptacles series 2 and series 3  used in the family of rectangular electrical connectors.
The receptacle connectors corresponding to those protective covers are specified in EN 4165 004, EN 4165 011 and EN 4165 025.

Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 018: Schutzkappe für festen Steckverbinder mit 1, 2 und 4 Modulen, Serie 2 und 3 - Produktnorm

Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température d'utilisation 175 °C - Partie 018 : Bouchon de vol pour les embases pour 1, 2 ou 4 modules, série 2 et série 3 - Norme de produit

Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna temperatura 175 °C - 018. del: Zaščitna kapa za enega, dva in štiri module, seriji 2 in 3 - Standard za proizvod

General Information

• Status: Not Published
• Publication Date: 01-Mar-2026
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 3 - Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 28-Nov-2024
• Completion Date: 28-Nov-2024
• Ref Project: oSIST prEN 4165-018:2024 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 018: Protective cover for 1, 2 and 4 module receptacles series 2 and 3 - Product standard

Relations

• Revises: EN 4165-018:2015 - Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 018: Protective cover for all receptacles series 2 - Product standard
• Effective Date: 20-Feb-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2024
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna
temperatura 175 °C - 018. del: Zaščitna kapa za enega, dva in štiri module, seriji 2
in 3 - Standard za proizvod
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature
175 °C continuous - Part 018: Protective cover for 1, 2 and 4 module receptacles series
2 and 3 - Product standard
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise -
Betriebstemperatur 175 °C konstant - Teil 018: Schutzkappe für festen Steckverbinder
mit 1, 2 und 4 Modulen, Serie 2 und 3 - Produktnorm
Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température
d'utilisation 175 °C - Partie 018 : Bouchon de vol pour les embases pour 1, 2 ou 4
modules, série 2 et série 3 - Norme de produit
Ta slovenski standard je istoveten z: prEN 4165-018
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2024
ICS 49.060 Will supersede EN 4165-018:2015
English Version
Aerospace series - Connectors, electrical, rectangular,
modular - Operating temperature 175 °C continuous - Part
018: Protective cover for 1, 2 and 4 module receptacles
series 2 and 3 - Product standard
Série aérospatiale - Connecteurs électriques Luft- und Raumfahrt - Elektrischer
rectangulaires modulaires - Température d'utilisation Rechtecksteckverbinder in modularer Bauweise -
175 °C - Partie 018 : Bouchon de vol pour les embases Betriebstemperatur 175 °C konstant - Teil 018:
pour 1, 2 ou 4 modules, série 2 et série 3 - Norme de Schutzkappe für festen Steckverbinder mit 1, 2 und 4
produit Modulen, Serie 2 und 3 - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4165-018:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Protective cover . 4
5.1 For 2 modules, classes W and F . 4
5.2 For 4 modules, classes W and F . 5
5.3 For single module . 7
6 Designation .
...