EN 12569:2020
(Main)Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
This document applies to valves of DN 15 and larger, made of metallic materials for chemical and petrochemical plants. It contains additional requirements to those contained in the relevant European product standards (e.g. EN 593, EN 1349) and EN 16668.
The use of design codes or technical rules other than described by European product standards is subject to agreement with the purchaser.
Process control devices and safety accessories are not subject of this document.
Industriearmaturen - Armaturen für die chemische und petrochemische Verfahrensindustrie - Anforderungen und Prüfungen
Dieses Dokument ist anzuwenden für Armaturen ab DN 15 aus metallischen Werkstoffen für chemische und petrochemische Anlagen. Es enthält zusätzliche Anforderungen zu denen, die in den entsprechenden europäischen Produktnormen (z. B. EN 593, EN 1349) und EN 16668 enthaltenen sind.
Die Anwendung anderer Konstruktionsrichtlinien oder technischer Regeln als jenen, die in den europäischen Produktnormen beschrieben sind, ist mit dem Besteller zu vereinbaren.
PLT-Geräte und Ausrüstungsteile mit Sicherheitsfunktion sind nicht Gegenstand dieses Dokuments.
Robinetterie industrielle - Appareils de robinetterie destinés aux procédés de l'industrie chimique et pétrochimique - Prescriptions et essais
Le présent document s'applique aux appareils de robinetterie métalliques de DN 15 et plus, destinés aux usines chimiques et pétrochimiques. Il contient des prescriptions supplémentaires à celles fournies par les Normes européennes de produits pertinentes (par exemple l'EN 593, l'EN 1349) et l'EN 16668.
L'utilisation de codes de conception ou de règles techniques autres que ceux décrits par les normes européennes de produits est soumise à un accord avec l'acheteur.
Les dispositifs de régulation de processus et les accessoires de sécurité ne relèvent pas du domaine d'application du présent document.
Industrijski ventili - Ventili za kemično in petrokemično procesno industrijo - Zahteve in preskusi
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2020
Nadomešča:
SIST EN 12569:2000
SIST EN 12569:2000/AC:2000
SIST EN 12569:2000/AC:2001
Industrijski ventili - Ventili za kemično in petrokemično procesno industrijo -
Zahteve in preskusi
Industrial valves - Valves for chemical and petrochemical process industry -
Requirements and tests
Industriearmaturen - Armaturen für die chemische und petrochemische
Verfahrensindustrie - Anforderungen und Prüfungen
Robinetterie industrielle - Appareils de robinetterie destinés aux procédés de l'industrie
chimique et pétrochimique - Prescriptions et essais
Ta slovenski standard je istoveten z: EN 12569:2020
ICS:
23.060.01 Ventili na splošno Valves in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 12569
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2020
EUROPÄISCHE NORM
ICS 23.060.01 Supersedes EN 12569:1999
English Version
Industrial valves - Valves for chemical and petrochemical
process industry - Requirements and tests
Robinetterie industrielle - Appareils de robinetterie Industriearmaturen - Armaturen für die chemische und
destinés aux procédés de l'industrie chimique et petrochemische Verfahrensindustrie - Anforderungen
pétrochimique - Prescriptions et essais und Prüfungen
This European Standard was approved by CEN on 14 September 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12569:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and symbols . 6
3.1 Terms and definitions . 6
3.2 Symbols . 7
4 Category of valves . 7
5 Requirements . 7
5.1 Design . 7
5.1.1 General . 7
5.1.2 Shell design strength . 9
5.1.3 Protection against exceeding the allowable limits . 9
5.1.4 Connection to the drive . 9
5.1.5 Additional requirements for butterfly valves, ball and plug valves . 10
5.1.6 Strength of valve stem and shaft . 10
5.1.7 Anti-blow out design . 10
5.2 Materials . 11
5.2.1 General . 11
5.2.2 Spheroidal graphite cast iron to EN 1563 . 11
5.2.3 Spheroidal graphite cast iron to EN 1563, 5.3103 and 5.3104 . 12
5.2.4 Cast steel . 12
5.3 Manufacturing . 12
5.3.1 Welding . 12
5.3.2 Supply chain . 12
5.4 Non-destructive testing (NDT) . 12
5.5 Final assessment . 12
5.6 Marking . 13
5.7 Surface and coating . 14
5.7.1 Surface finish . 14
5.7.2 Flange facing surfaces . 15
5.8 Condition as delivered . 15
5.9 Documentation . 15
Annex A (normative) Supplementary possible steel grades for fasteners . 16
Annex B (normative) Threaded holes for pneumatic connections . 18
Annex C (informative) Basic configuration of the valve interface from part-turn actuator to
the valve with a bracket . 20
Bibliography . 23
European foreword
This document (EN 12569:2020) has been prepared by Technical Committee CEN/TC 69 “Industrial
valves”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2021, and conflicting national standards shall be
withdrawn at the latest by April 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12569:1999 and EN 12569:1999/AC:2000.
The main technical changes compared to the previous edition are the following:
— Clause 2 on normative references has been updated;
— Clause 3 for terms, definitions and symbols has been added;
— Clause 5 on the applicable requirements has been completely re-written;
— normative Annex A on supplementary possible steel grades for fasteners and normative Annex B for
threaded holes for pneumatic connections have been added;
— informative Annex C giving basic configuration of the valve interface from actuator to the valve with
a bracket has been added.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
Introduction
This document is based on the experience of the chemical and petrochemical industry and provides
additional requirements to those given in EN 16668 and valve product standards.
It is assumed that the essential safety requirements of the European legislation for pressure equipment
(satisfied by European product standards) and safety requirements from EN 16668 and other standards
are satisfied.
1 Scope
This document applies to valves of DN 15 and larger, made of metallic materials for chemical and
petrochemical plants. It contains additional requirements to those contained in the relevant European
product standards (e.g. EN 593, EN 1349) and EN 16668.
The use of design codes or technical rules other than described by European product standards is subject
to agreement with the purchaser.
Process control devices and safety accessories are not subject of this document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 558, Industrial valves — Face to-face and centre-to-face dimensions of metal valves for use in flanged
pipe systems — PN and Class designated valves
EN 736-2:2016, Valves — Terminology — Part 2: Definition of components of valves
EN 736-3:2008, Valves — Terminology — Part 3: Definition of terms
EN 1092-1, Flanges and their joints — Circular flanges for pipes, valves, fittings and accessories, PN
designated — Part 1: Steel flanges
EN 1267, Industrial valves — Test of flow resistance using water as test fluid
EN 1349, Industrial process control valves
EN 1515-4, Flanges and their joints — Bolting — Part 4: Selection of bolting for equipment subject to the
Pressure Equipment Directive 97/23/EC
EN 1563, Founding — Spheroidal graphite cast irons
EN 1759 (all parts), Flanges and their joint — Circular flanges for pipes, valves, fittings and accessories,
Class designated
EN 10204, Metallic products — Types of inspection documents
EN 10269, Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 12266-1:2012, Industrial valves — Testing of metallic valves — Part 1: Pressure tests, test procedures
and acceptance criteria — Mandatory requirements
EN 12266-2:2012, Industrial valves — Testing of metallic valves — Part 2: Tests, test procedures and
acceptance criteria – Supplementary requirements
EN 12351, Industrial valves — Protective caps for valves with flanged connections
EN 12570, Industrial valves — Method for sizing the operating element
EN 15081, Industrial valves — Mounting kits for part-turn valve actuator attachment
EN 16668:2016+A1:2018, Industrial valves — Requirements and testing for metallic valves as pressure
accessories
EN 60534-4:2006, Industrial-process control valves — Part 4: Inspection and routine testing
EN ISO 1179-1, Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads
with elastomeric or metal-to-metal sealing — Part 1: Threaded ports (ISO 1179-1)
EN ISO 5210, Industrial valves — Multi-turn valve actuator attachments (ISO 5210)
EN ISO 5211:2017, Industrial valves — Part-turn actuator attachments (ISO 5211:2017)
EN ISO 15848-1:2015, Industrial valves — Measurement, test and qualification procedures for fugitive
emissions – Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-
1:2015)
3 Terms, definitions and symbols
3.1 Terms and definitions
For the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.