EN 17074:2019
(Main)Glass in building - Environmental product declaration - Product category rules for flat glass products
Glass in building - Environmental product declaration - Product category rules for flat glass products
This document covers all life cycle stages, from cradle to grave, namely product stage, construction process stage, use stage and end-of-life stage of glass products (see Clause 4), used in buildings.
While covering all life cycle stages, this PCR primarily focuses on the product stage, in particular the manufacturing of flat glass and the consequent processing into flat glass products (as listed in point 4.), from cradle to gate. It covers raw materials and energy supply, transport, flat glass manufacturing, flat glass processing, packaging and storage.
All requirements and recommendations in this PCR for the elaboration of the Life Cycle Inventory may be applicable to flat glass used in other applications.
This PCR includes the rules to produce EPD that contains more than one thickness or configuration of the same product.
Glas im Bauwesen - Umweltproduktdeklaration - Produktkategorieregeln für Flachglasprodukte
Dieses Dokument deckt alle Lebenszyklusphasen, von der Wiege bis zur Bahre, ab, das heißt die Herstellungsphase, die Errichtungsphase, die Nutzungsphase und die Entsorgungsphase von Glaserzeugnissen (siehe Abschnitt 4), die in Gebäuden verwendet werden.
Obwohl sie alle Lebenszyklusphasen abdecken, konzentrieren sich die Produktkategorieregeln hauptsächlich auf die Herstellungsphase, insbesondere die Herstellung von Flachglas und die nachfolgende Verarbeitung zu Flachglaserzeugnissen (wie in Punkt 4 aufgeführt), von der Wiege bis zum Fabriktor. Es werden Ausgangsstoffe und Energiezufuhr, Transport, Flachglasherstellung, Flachglasverarbeitung, Verpackung und Lagerung abgedeckt.
Alle in diesen PCR festgelegten Anforderungen und Empfehlungen zur Ausarbeitung einer Sachbilanz dürfen auf Flachglas angewendet werden, das in anderen Anwendungen genutzt wird.
Diese PCR beinhalten die Regeln zur Erstellung einer EPD, die mehr als eine Stärke oder Konfiguration desselben Produkts enthält.
Verre dans la construction - Déclaration environnementale des produits - Règles régissant les catégories de produits en verre plat
Le présent document couvre l'ensemble des étapes du cycle de vie, depuis la production jusqu'à l'élimination finale, c'est-à-dire les étapes de production, de construction, d'utilisation et de fin de vie des produits verriers (voir Article 4) utilisés dans les bâtiments.
Bien que couvrant l'ensemble des étapes du cycle de vie, les présentes PCR portent essentiellement sur l'étape de production, et plus particulièrement la fabrication du verre plat et son traitement ultérieur au sein de produits en verre plat (voir Article 4), depuis la production jusqu'à l'élimination finale. Elles couvrent l'utilisation de matières premières et d'énergie, le transport, la fabrication du verre plat, le traitement du verre plat, ainsi que le conditionnement et le stockage.
Toutes les exigences et recommandations spécifiées dans les présentes PCR pour l'élaboration de l'inventaire du cycle de vie (ICV) peuvent s'appliquer au verre plat utilisé dans d'autres applications.
Les présentes PCR fournissent également les règles relatives à la production de EPD contenant plus d'une épaisseur ou configuration d'un même produit.
Steklo v gradbeništvu - Okoljske deklaracije za proizvode - Pravila za kategorije proizvodov iz ravnega stekla
Ta evropski standard zajema vse faze življenjskega cikla proizvodov iz stekla, in sicer od faze proizvoda, faze vgradnje, faze uporabe do faze odlaganja proizvodov iz stekla (glej točko 4), ki se uporabljajo v stavbah. Čeprav ta pravila za kategorije proizvodov zajemajo vse faze življenjskega cikla, se osredotočajo predvsem na fazo proizvoda, zlasti na proizvodnjo ravnega stekla in posledično predelavo v proizvode iz ravnega stekla (kot je navedeno v točki 4) »od zibelke do vrat«. Zajema oskrbo s surovinami in energijo, transport, proizvodnjo ravnega stekla, obdelavo ravnega stekla, pakiranje in skladiščenje. Vse zahteve in priporočila v teh pravilih za kategorije proizvodov za izdelavo seznama življenjskega cikla se lahko uporabljajo za ravno steklo pri drugih načinih uporabe, na primer za ravno steklo v avtomobilski industriji. Ta pravila za kategorije proizvodov vključujejo pravila za izdelavo okoljskih deklaracij na proizvodih z več kot eno debelino ali konfiguracijo istega izdelka.
Ta evropski standard se ne uporablja za steklene bloke, steklene tlakovce (EN 1051-1) in steklo v obliki kanala (EN 572-7, EN 15683-1).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2020
Steklo v gradbeništvu - Okoljske deklaracije za proizvode - Pravila za kategorije
proizvodov iz ravnega stekla
Glass in building - Environmental product declaration - Product category rules for flat
glass products
Glas im Bauwesen - Umweltproduktdeklaration - Produktkategorieregeln für
Flachglaserzeugnisse
Verre dans la construction - Déclaration environnementale des produits - Règles
régissant les catégories de produits en verre plat
Ta slovenski standard je istoveten z: EN 17074:2019
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
81.040.20 Steklo v gradbeništvu Glass in building
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17074
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 81.040.20
English Version
Glass in building - Environmental product declaration -
Product category rules for flat glass products
Verre dans la construction - Déclaration Glas im Bauwesen - Umweltproduktdeklaration -
environnementale des produits - Règles régissant les Produktkategorieregeln für Flachglasprodukte
catégories de produits en verre plat
This European Standard was approved by CEN on 2 September 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17074:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 7
4 Products covered/ Products category . 8
5 Comparability of EPDs . 10
6 Date of publication . 10
7 PCR review . 10
8 Expiration date . 10
9 Product category rules for LCA . 10
10 Content of the EPD . 19
Annex A (informative) Reference Service Life justification . 26
Annex B (informative) Glass manufacturing process. 27
Annex C (informative) Method to calculate the potential environmental benefits of the use
of glass. . 28
Annex D (informative) Recycling glass into new flat glass products (closed-loop recycling) . 29
Bibliography . 31
European foreword
This document (EN 17074:2019) has been prepared by Technical Committee CEN/TC 129 “Glass in
building”, the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Introduction
This document provides Product Specific Category Rules for flat glass products (Flat Glass PCR) used in
buildings and other construction works to support the assessment of the environmental performance
and the development of Environment Product Declarations.
This Flat Glass PCR aims at complementing the general rules established in EN 15804:2012+A1:2013,
by providing additional detailed rules on technical and environmental aspects of the manufacture of flat
glass products, as well as information on relevant aspects linked to use and end-of-life stages, on a
harmonized and scientific basis.
It specifies the requirements for the Life Cycle Assessment (LCA) study and the format and content of
the EPD itself.
In the Environment Product Declarations, the information is presented by way of a modular approach,
which allows for the easy organization and expression of data packages throughout the life cycle stages
of the product. The approach requires that the underlying data should be consistent, reproducible and
comparable.
1 Scope
This document covers all life cycle stages, from cradle to grave, namely product stage, construction
process stage, use stage and end-of-life stage of glass products (see Clause 4), used in buildings.
While covering all life cycle stages, this PCR primarily focuses on the product stage, in particular the
manufacturing of flat glass and the consequent processing into flat glass products (as listed in point 4.),
from cradle to gate. It covers raw materials and energy supply, transport, flat glass manufacturing, flat
glass processing, packaging and storage.
All requirements and recommendations in this PCR for the elaboration of the Life Cycle Inventory may
be applicable to flat glass used in other applications.
This PCR includes the rules to produce EPD that contains more than one thickness or configuration of
the same product.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 572-1:2012+A1:2016, Glass in building - Basic soda lime silicate glass products - Part 1: Definitions
and general physical and mechanical properties
EN 572-2, Glass in building - Basic soda lime silicate glass products - Part 2: Float glass
EN 572-3, Glass in building - Basic soda lime silicate glass products - Part 3: Polished wired glass
EN 572-4, Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass
EN 572-5, Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass
EN 572-6, Glass in building - Basic soda lime silicate glass products - Part 6: Wired patterned glass
EN 572-7, Glass in building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel
shaped glass
EN 1036-1, Glass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions,
requirements and test methods
EN 1051-1, Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description
EN 1096-1, Glass in building - Coated glass - Part 1: Definitions and classification
EN 1279-1, Glass in Building - Insulating glass units - Part 1: Generalities, system description, rules for
substitution, tolerances and visual quality
EN 1748-1-1, Glass in building - Special basic products -Borosilicate glasses - Part 1-1: Definition and
general physical and mechanical properties
EN 1748-2-1, Glass in building - Special basic products - Glass ceramics - Part 2-1 Definitions and general
physical and mechanical properties
EN 1863-1, Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and
description
EN 12150-1:2015+A1:2019, Glass in building - Thermally toughened soda lime silicate safety glass - Part
1: Definition and description
EN 12337-1, Glass in building - Chemically strengthened soda lime silicate glass - Part 1: Definition and
description
EN 13024-1, Glass in building - Thermally toughened borosilicate safety glass - Part 1: Definition and
description
EN 14178-1, Glass in building - Basic alkaline earth silicate glass products - Part 1: Float glass
EN 14179-1, Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1:
Definition and description
EN 14321-1, Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1: Definition
and description
EN 15681-1, Glass in building - Basic alumino silicate glass products - Part 1: Definitions and general
physical and mechanical properties
EN 15682-1, Glass in building - Heat soaked thermally toughened alkaline earth silicate safety glass - Part
1: Definition and description
EN 15683-1, Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part
1: Definition and description
EN 15755-1, Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and
requirements
EN 15804:2012+A1:2013, Sustainability of construction works - Environmental product declarations -
Core rules for the product category of construction products
EN 16477-1, Glass in building - Painted glass for internal use - Part 1: Requirements
EN ISO 12543-1, Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and
description of component parts (ISO 12543-1)
EN ISO 12543-2, Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety
glass (ISO 12543-2)
EN ISO 12543-3, Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass
(ISO 12543-3)
EN ISO 14025, Environmental labels and declarations - Type III environmental declarations - Principles
and procedures (ISO 14025)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 15804:2012+A1:2013 and the
following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at https://www.iso.org/obp
3.1
by-product
substance or object, resulting from a production process, the primary aim of which is not the
production of that item, and which meets the following conditions:
(a) further use is certain;
(b) it can be used directly without any further processing other than normal industrial practice;
(c) it is produced as an integral part of a production process; and
(d) further use is lawful
[SOURCE: DIRECTIVE 2008/98/EC, Article 5]
3.2
end-of-waste status
certain specified waste ceases to be waste when it has undergone a recovery, including recycling,
operation and complies with specific criteria developed in accordance with the following conditions:
(a) it is commonly used for specific purposes;
(b) a market or demand exists;
(c) it fulfils the technical requirements for the specific purposes and meets the existing legislation and
standards applicable to products; and
(d) the use will not lead to overall adverse environmental or human health impacts
[SOURCE: DIRECTIVE 2008/98/EC, Article 6]
Note 1 to entry: Criteria for determining when glass cullet destined for the production of glass substances or
objects in re-melting processes ceases to be waste are established by the Commission Regulation No 1
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.