EN ISO 25649-6:2017

Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2017)

ISO 25649-6:2017 is applicable for Class D floating leisure articles for use on and in water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
ISO 25649-6:2017 is to be applied with ISO 25649‑1 and ISO 25649‑2.
NOTE 1    Typical products forming Class D (see Annex A):
-      inflatable climbing structures on the water;
-      bouncing platforms;
-      inflatable slides;
-      water trampolines;
-      teeter totters;
-      obstacle courses.
NOTE 2    Typical places for application:
-      pools;
-      lakes, ponds;
-      open sea;
-      sea shore (no offshore winds, no currents).

Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 6: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Artikel der Klasse D (ISO 25649-6:2017)

Articles des loisirs flottants à utiliser sur ou dans l'eau - Partie 6: Exigences de sécurité et méthodes d'essai complémentaires propres aux dispositifs de Classe D (ISO 25649-6:2017)

ISO 25649-6:2017 est applicable aux articles de loisirs flottants de Classe D à utiliser sur ou dans l'eau conformément à l'ISO 25649‑1, dont la flottabilité est assurée par gonflage ou par un matériau ayant une flottabilité propre.
ISO 25649-6:2017 s'applique conjointement à l'ISO 25649‑1 et à l'ISO 25649‑2.
NOTE 1    Produits typiques constituant la Classe D (voir l'Annexe A):
-      structures gonflables d'escalade à utiliser sur l'eau;
-      plates-formes à rebond;
-      toboggans gonflables;
-      trampolines aquatiques;
-      jeux de bascule;
-      courses d'obstacles.
NOTE 2    Lieux d'utilisation typiques:
-      piscines;
-      lacs, étangs;
-      pleine mer;
-      bord de mer (pas de vent de terre ni de courant).

Plavajoči pripomočki za prosti čas, ki se uporabljajo na vodi in v njej - 6. del: Dodatne posebne varnostne zahteve in preskusne metode za pripomočke razreda D (ISO 25649-6:2017)

Ta evropski standard se uporablja za plavajoče pripomočke za prosti čas, razvrščene v RAZRED D, ki se uporabljajo na vodi in v njej v skladu s standardom EN 15649-1, ne glede na to, ali je plovnost dosežena z napihovanjem ali plovnim materialom. Ta dokument (EN 15649-6) se uporablja s standardoma EN 15649-1 in EN 15649-2.

General Information

• Status: Published
• Publication Date: 10-Oct-2017
• Withdrawal Date: 29-Apr-2018
• ICS: 97.220.40 - Outdoor and water sports equipment
• Technical Committee: CEN/TC 136 - Sports, playground and other recreational equipment
• Drafting Committee: CEN/TC 136/WG 13 - Floating leisure articles for use on water
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 11-Oct-2017
• Due Date: 16-Nov-2017
• Completion Date: 11-Oct-2017
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Mandate: M/372 - Standardisation mandate to CEN relating to floating leisure products for use on or in the water
• Ref Project: SIST EN ISO 25649-6:2017 - Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2017)

Relations

• Replaces: EN 15649-6:2009+A1:2013 - Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices
• Effective Date: 05-Dec-2014
• Revised: EN ISO 25649-6:2024 - Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO/FDIS 25649-6:2024)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2017
1DGRPHãþD
SIST EN 15649-6:2010+A1:2014
3ODYDMRþLSULSRPRþNL]DSURVWLþDVNLVHXSRUDEOMDMRQDYRGLLQYQMHMGHO
'RGDWQHSRVHEQHYDUQRVWQH]DKWHYHLQSUHVNXVQHPHWRGH]DSULSRPRþNHUD]UHGD
',62
Floating leisure articles for use on and in the water - Part 6: Additional specific safety
requirements and test methods for Class D devices (ISO 25649-6:2017)
Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 6: Zusätzliche
besondere sicherheitstechnische Anforderungen und Prüfverfahren für Artikel der Klasse
D (ISO 25649-6:2017)
Articles des loisirs flottants à utiliser sur ou dans l'eau - Partie 6 : Exigences de sécurité
et méthodes d'essai complémentaires propres aus dispositifs de Classe D (ISO 25649-
6:2017)
Ta slovenski standard je istoveten z: EN ISO 25649-6:2017
ICS:
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 25649-6
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2017
EUROPÄISCHE NORM
ICS 97.220.40 Supersedes EN 15649-6:2009+A1:2013
English Version
Floating leisure articles for use on and in the water - Part
6: Additional specific safety requirements and test
methods for Class D devices (ISO 25649-6:2017)
Articles des loisirs flottants à utiliser sur ou dans l'eau - Schwimmende Freizeitartikel zum Gebrauch auf und
Partie 6: Exigences de sécurité et méthodes d'essai im Wasser - Teil 6: Zusätzliche besondere
complémentaires propres aux dispositifs de Classe D sicherheitstechnische Anforderungen und
(ISO 25649-6:2017) Prüfverfahren für Artikel der Klasse D (ISO 25649-
6:2017)
This European Standard was approved by CEN on 24 June 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 25649-6:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 25649-6:2017) has been prepared by Technical Committee ISO/TC 83 “Sports
and other recreational facilities and equipment” in collaboration with Technical Committee
CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2018, and conflicting national standards shall be
withdrawn at the latest by April 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15649-6:2009+A1:2013.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 25649-6:2017 has been approved by CEN as EN ISO 25649-6:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 25649-6
First edition
2017-08
Floating leisure articles for use on and
in the water —
Part 6:
Additional specific safety
requirements and test methods for
Class D devices
Articles des loisirs flottants à utiliser sur ou dans l'eau —
Partie 6: Exigences de sécurité et méthodes d'essai complémentaires
propres aux dispositifs de Classe D
Reference number
ISO 25649-6:2017(E)
©
ISO 2017
ISO 25649-6:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 25649-6:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Safety requirements and test methods . 3
4.1 General . 3
4.2 Design of buckles and other fixings . 3
4.2.1 Requirements . 3
4.2.2 Testing . 3
4.3 Sizing and admissible number of users, maximum load capacity . 3
4.3.1 General. 3
4.3.2 Space per person per trampoline . 4
4.4 Components . 4
4.4.1 Valves and stoppers (special requirements for Class D) . 4
4.4.2 Testing . 5
4.5 In water performance . 5
4.5.1 Class D devices, floating stability . 5
4.5.2 Floating devices not claiming to provide floating stability . 5
4.5.3 Buoyancy and amount of residual buoyancy . 5
4.5.4 Nominative buoyancy for floating leisure articles claiming floating
stability when fully inflated . 6
4.5.5 Carrying handles and climbing facilities . 6
4.5.6 Re-embarkation from the water . 8
4.5.7 Anchorage . 8
4.5.8 Water depth . . 9
4.5.9 Horizontal safety distance with surrounding area .10
4.5.10 Visibility.10
4.5.11 Repair kit .11
4.5.12 Springs, protection against corrosion, durability .11
4.5.13 Safety pad for trampolines and bouncy platforms .11
4.5.14 Connection of inflatable components .12
4.5.15 Swimming in close approximation under extra-large floating leisure articles .13
4.5.16 Testing .13
5 Instruction manual .13
6 Exclusion .14
Annex A (informative) Examples of typical products forming Class D .16
Bibliography .18
ISO 25649-6:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. I
...