EN ISO 7046-1:2011

Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011)

ISO 7046-1:2011 specifies the characteristics of countersunk flat head screws with threads from M1,6 to M10 inclusive, of product grade A and property class 4.8, and with type H or type Z cross recess.

Senkschrauben (Einheitskopf) mit Kreuzschlitz Form H oder Form Z - Produktklasse A - Teil 1: Schrauben aus Stahl mit Festigkeitsklasse 4.8 (ISO 7046-1:2011)

Dieser Teil von ISO 7046 enthält Festlegungen zu Senkschrauben mit Gewinde von M1,6 bis M10, in
Produktklasse A, im Kreuzschlitz Form H oder Form Z.
Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt,
so können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 888,
ISO 898-1 und ISO 965-2.

Vis à métaux à tête fraisée à empreinte cruciforme de type H ou de type Z - Grade A - Partie 1: Vis en acier de classe de qualité 4.8 (ISO 7046-1:2011)

L'ISO 7046-1:2011 spécifie les caractéristiques des vis à métaux à tête fraisée à empreinte cruciforme de type H ou de type Z, de diamètre de filetage M1,6 à M10 inclus, de grade A et de classe de qualité 4.8.

Vijaki z ugrezno glavo in križno zarezo - Razred izdelave A - 1. del: Jeklo trdnostnega razreda 4.8 (ISO 7046-1:2011)

Ta mednarodni standard določa značilnosti vijakov z ugrezno glavo in križno zarezo v obliki H ali Z, z navoji od M1,6 do vključno M10, razreda izdelave A in trdnostnega razreda 4.8.
Če se v posebnih primerih zahtevajo specifikacije, ki so drugačne od navedenih v tem delu ISO 7046, se lahko izberejo med obstoječimi mednarodnimi standardi, na primer ISO 261, ISO 888, ISO 898-1, ISO 965-2.

General Information

• Status: Published
• Publication Date: 31-Aug-2011
• Withdrawal Date: 30-Mar-2012
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Sep-2011
• Completion Date: 01-Sep-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 7046-1:2011 - Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:2011)

Relations

• Replaces: EN ISO 7046-1:1994 - Countersunk flat head screws (common head style with type H or type Z cross recess) - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:1994)
• Effective Date: 18-Sep-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vijaki z ugrezno glavo in križno zarezo - Razred izdelave A - 1. del: Jeklo trdnostnega razreda 4.8 (ISO 7046-1:2011)Senkschrauben (Einheitskopf) mit Kreuzschlitz Form H oder Form Z - Produktklasse A - Teil 1: Festigkeitsklasse 4.8 (ISO 7046-1:2011)Vis à métaux à tête fraisée à empreinte cruciforme de type H ou de type Z - Grade A - Partie 1: Acier de classe de qualité 4.8 (ISO 7046-1:2011)Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:2011)21.060.10Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN ISO 7046-1:2011SIST EN ISO 7046-1:2011en,fr,de01-december-2011SIST EN ISO 7046-1:2011SLOVENSKI
STANDARDSIST EN ISO 7046-1:19961DGRPHãþD



SIST EN ISO 7046-1:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 7046-1
September 2011 ICS 21.060.10 Supersedes EN ISO 7046-1:1994English Version
Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:2011)
Vis à métaux à tête fraisée à empreinte cruciforme de type H ou de type Z - Grade A - Partie 1: Acier de classe de qualité 4.8 (ISO 7046-1:2011)
Senkschrauben (Einheitskopf) mit Kreuzschlitz Form H oder Form Z - Produktklasse A - Teil 1: Stahl mit Festigkeitsklasse 4.8 (ISO 7046-1:2011) This European Standard was approved by CEN on 8 August 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 7046-1:2011: ESIST EN ISO 7046-1:2011



EN ISO 7046-1:2011 (E) 2 Contents Page Foreword .3 SIST EN ISO 7046-1:2011



EN ISO 7046-1:2011 (E) 3 Foreword This document (EN ISO 7046-1:2011) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at the latest by March 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 7046-1:1994. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 7046-1:2011 has been approved by CEN as a EN ISO 7046-1:2011 without any modification.
SIST EN ISO 7046-1:2011



SIST EN ISO 7046-1:2011



Reference numberISO 7046-1:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO7046-1Second edition2011-09-01Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8 Vis à métaux à tête fraisée à empreinte cruciforme de type H ou de type Z — Grade A — Partie 1: Vis en acier de classe de qualité 4.8
SIST EN ISO 7046-1:2011



ISO 7046-1:2011(E)
COPYRIGHT PROTECTED DOCUMENT
©
ISO
...