EN 3746:2007

Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD

This standard specifies the characteristics of O-rings in fluorosilicone rubber FVMQ, hardness 80 IRHD, for aerospace applications.
They are intended to be used in air, mineral/synthetic oil and fuel systems.
Operating conditions – Temperature:
a)   Continuous operation:  55 °C to 150 °C;
b)   Intermittent service:  55 °C to 200 °C.
Limitation:
not to be used with phosphoric ester type hydraulic fluids (permanent or temporary immersion).

Luft­ und Raumfahrt - O-Ringe aus Fluorsilikon­Elastomer (FVMQ) - Härte 80 IRHD

Diese Norm legt die Eigenschaften von O-Ringen aus Fluorsilikon-Elastomer (FVMQ), Härte 80 IRHD, für Anwendungen in der Luft- und Raumfahrt fest.
Diese O-Ringe sind für die Verwendung in Luft-, Öl- (Mineralöl- und synthetisches Öl) und Kraftstoffanlagen bestimmt.
Nutzungsbedingungen - Temperaturbereich:
a)   Langzeitverwendung: - 55 °C bis + 150 °C;
b)   Kurzzeitverwendung: - 55 °C bis + 200 °C.
Einschränkung:
Sie dürfen nicht mit Hydraulikflüssigkeiten auf Phosphoresterbasis verwendet werden (ständiges oder zeitwei¬ses Eintauchen).

Aeronavtika - O-obročki iz fluorosilikonske gume (FVMQ) - Trdota 80 IRHD

General Information

• Status: Published
• Publication Date: 19-Jun-2007
• Withdrawal Date: 30-Dec-2007
• ICS: 49.025.40 - Rubber and plastics
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 20-Jun-2007
• Completion Date: 20-Jun-2007
• Ref Project: SIST EN 3746:2009 - Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD

Relations

• Replaces: EN 3746:2003 - Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3746:2009
01-marec-2009
1DGRPHãþD
SIST EN 3746:2004
$HURQDYWLND2REURþNLL]IOXRURVLOLNRQVNHJXPH)9047UGRWD,5+'
Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD
Luft­ und Raumfahrt - O-Ringe aus Fluorsilikon­Elastomer (FVMQ) - Härte 80 IRHD
Ta slovenski standard je istoveten z: EN 3746:2007
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
SIST EN 3746:2009 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3746:2009

---------------------- Page: 2 ----------------------

SIST EN 3746:2009
EUROPEAN STANDARD
EN 3746
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2007
ICS 49.025.40 Supersedes EN 3746:2003
English Version
Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) -
Hardness 80 IRHD
This European Standard was approved by CEN on 11 September 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3746:2007: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3746:2009
EN 3746:2007 (E)
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Required characteristics.4
4 Storage.10
5 Designation .10
6 Marking/Packaging .10
7 Technical specification .10

2

---------------------- Page: 4 ----------------------

SIST EN 3746:2009
EN 3746:2007 (E)
Foreword
This document (EN 3746:2007) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2007, and conflicting national standards shall be withdrawn
at the latest by December 2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3746:2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherland
...