EN 4708-107:2019

Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 107: Polytetrafluoroethylene (PTFE) - Operating temperatures - 65 °C to 260 °C - Product standard

This document specifies the required characteristics for a heat-shrinkable, polytetrafluoroethylene sleeving for use in aircraft electrical systems at operating temperatures between  65 °C and 260 °C. This sleeving is basically translucent. It is semi-rigid, and suitable for use where resistance to chemicals and high temperature performance are required. It is flame resistant and available in low and high shrink ratios.

Luft- und Raumfahrt - Wärmeschrumpfender Schlauch zur Befestigung, Isolierung und Identifizierung - Teil 107: Polytetrafluorethylen (PTFE) - Temperaturbereich -65 °C bis 260 °C - Produktnorm

Dieses Dokument legt die Eigenschaften für einen wärmeschrumpfenden Schlauch aus Polytetrafluorethylen zur Verwendung in elektrischen Systemen von Luftfahrzeugen bei Betriebstemperaturen zwischen −65 °C und 260 °C fest. Diese Schläuche sind grundsätzlich durchscheinend. Sie sind halbsteif und zur Verwendung an Stellen geeignet, an denen eine Beständigkeit gegen Chemikalien und eine hohe Temperaturleistung erforderlich sind. Sie sind flammbeständig und in niedrigen und hohen Schrumpfverhältnissen erhältlich.
Typ A Niedriges Schrumpfverhältnis
Typ B Hohes Schrumpfverhältnis

Série aérospatiale - Manchons thermorétractables, de jonction, isolement et identification - Partie 107 : Polytétrafluoroéthylène (PTFE) - Températures d'utilisation - 65 °C à 260 °C - Norme de produit

Le présent document spécifie les caractéristiques requises pour un manchon thermorétractable, en polytétrafluoroéthylène, destiné à être utilisé dans les systèmes électriques des aéronefs à des températures comprises entre 65 °C et 260 °C. Ce manchon est essentiellement translucide. Il est semi-rigide et est approprié à un usage nécessitant une résistance aux produits chimiques et aux températures élevées. Il est ininflammable et est disponible avec des coefficients de rétreint faible et élevé.
Type A Faible coefficient de rétreint
Type B Coefficient de rétreint élevé

Aeronavtika - Toplotno skrčljiva cev za utrjevanje, izolacijo in identifikacijo - 107. del: Politetrafluoretilen (PTFE) - Delovna temperatura od –65 °C do 260 °C - Standard za proizvod

Ta standard določa zahtevane lastnosti toplotno skrčljivih politetrafluoretilenskih cevi za uporabo v električnih sistemih letal pri delovni temperaturi od –65 °C do 260 °C. Ta cev je v osnovi prosojna. Je poltoga in primerna za uporabo, pri kateri sta potrebni odpornost proti kemikalijam in visoka temperaturna zmogljivost. Je odporna proti plamenom ter na voljo z nizkimi in visokimi razmerji krčenja. Tip A – nizko razmerje krčenja; tip B – visoko razmerje krčenja.

General Information

• Status: Published
• Publication Date: 24-Sep-2019
• Withdrawal Date: 30-Mar-2020
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 8 - Installation Technologies
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 25-Sep-2019
• Completion Date: 25-Sep-2019
• Ref Project: SIST EN 4708-107:2019 - Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 107: Polytetrafluoroethylene (PTFE) - Operating temperatures - 65 °C to 260 °C - Product standard

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4708-107:2019
01-december-2019
Aeronavtika - Toplotno skrčljiva cev za utrjevanje, izolacijo in identifikacijo - 107.
del: Politetrafluoretilen (PTFE) - Delovna temperatura od –65 °C do 260 °C -
Standard za proizvod
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification -
Part 107: Polytetrafluoroethylene (PTFE) - Operating temperatures - 65 °C to 260 °C -
Product standard
Luft- und Raumfahrt - Wärmeschrumpfender Schlauch zur Befestigung, Isolierung und
Identifizierung - Teil 107: Polytetrafluorethylen (PTFE) - Temperaturbereich - 65 °C und
260 °C - Produktnorm
Série aérospatiale - Manchons thermorétractables, de jonction, isolement et identification
- Partie 107 : Polytétrafluoroéthylène (PTFE) - Températures d'utilisation - 65 °C à 260
°C - Norme de produit
Ta slovenski standard je istoveten z: EN 4708-107:2019
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 4708-107:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4708-107:2019

---------------------- Page: 2 ----------------------
SIST EN 4708-107:2019


EN 4708-107
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2019
EUROPÄISCHE NORM
ICS 49.060
English Version

Aerospace series - Sleeving, heat-shrinkable, for binding,
insulation and identification - Part 107:
Polytetrafluoroethylene (PTFE) - Operating temperatures -
65 °C to 260 °C - Product standard
Série aérospatiale - Manchons thermorétractables, de Luft- und Raumfahrt - Wärmeschrumpfender Schlauch
jonction, isolement et identification - Partie 107 : zur Befestigung, Isolierung und Identifizierung - Teil
Polytétrafluoroéthylène (PTFE) - Températures 107: Polytetrafluorethylen (PTFE) -
d'utilisation - 65 °C à 260 °C - Norme de produit Temperaturbereich -65 °C bis 260 °C - Produktnorm
This European Standard was approved by CEN on 14 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4708-107:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 4708-107:2019
EN 4708-107:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
5 Quality assurance . 12
6 Designation . 12
7 Labelling and packaging . 12
8 Technical specifi
...