EN ISO 25649-7:2017

Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25649-7:2017)

ISO 25649-7:2017 is applicable for Class E floating leisure articles for use on and in water according to ISO 25649‑1 regardless whether the buoyancy is achieved by inflation or inherent buoyant material.
ISO 25649-7:2017 is applicable with ISO 25649‑1 and ISO 25649‑2.
Class E devices are intended for use in bathing areas or in protected and safe shore zones.
NOTE 1    Typical products forming Class E (see Annex F):
-      inflatable boats for rowing or paddling of near oval shape with or without transom;
-      canoes and kayaks;
-      inflatable boats made from plastic sheets or from reinforced materials;
-      motor kit/sail kit as additional option.
NOTE 2    Typical places for application of Class E devices:
-      moving from A to B for pleasure purposes;
-      staying on the water for relaxing;
-      moving from shore to the main boat, transportation of persons and load (tender boat).

Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 7: Teil 7: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Artikel der Klasse E (ISO 25649-7:2017)

Articles de loisirs flottants à utiliser sur ou dans l'eau - Partie 7: Exigences de sécurité et méthodes d'essai complémentaires propres aux dispositifs de Classe E (ISO 25649-7:2017)

ISO 25649-7:2017 est applicable aux articles de loisirs flottants de Classe E à utiliser sur ou dans l'eau conformément à l'ISO 25649‑1, dont la flottabilité est assurée par gonflage ou par un matériau ayant une flottabilité propre.
ISO 25649-7:2017 est applicable conjointement à l'ISO 25649‑1 et à l'ISO 25649‑2.
Les articles de Classe E sont destinés à être utilisés dans des zones de baignade ou dans des zones côtières protégées et sûres.
NOTE 1    Produits typiques constituant la Classe E (voir l'Annexe F):
-      bateaux gonflables à rames ou à pagaies de forme presque ovale, avec ou sans tableau arrière;
-      canoës et kayaks;
-      bateaux gonflables fabriqués à l'aide de feuilles de matière plastique ou de matériaux renforcés;
-      en option: bloc moteur/équipement de voilure.
NOTE 2    Lieux d'utilisation typiques des dispositifs de Classe E:
-      aller d'un point A à un point B pour le plaisir;
-      rester sur l'eau pour se relaxer;
-      aller du rivage jusqu'à l'embarcation principale, transport de personnes et de charge (bateau annexe).

Plavajoči pripomočki za prosti čas, ki se uporabljajo na vodi in v njej - 7. del: Dodatne posebne varnostne zahteve in preskusne metode za pripomočke razreda E (ISO 25469-7:2017)

Ta evropski standard se uporablja za plavajoče pripomočke za prosti čas, razvrščene v RAZRED E, ki se uporabljajo na vodi in v njej v skladu s standardom EN 15649-1, ne glede na to, ali je plovnost dosežena z napihovanjem ali plovnim materialom. Ta dokument (EN 15649-7) se uporablja s standardoma EN 15649-1 in EN 15649-2. Pripomočki razreda E so namenjeni uporabi na kopališčih ali na zavarovanih in zaščitenih delih obale.

General Information

• Status: Published
• Publication Date: 10-Oct-2017
• Withdrawal Date: 29-Apr-2018
• ICS: 97.220.40 - Outdoor and water sports equipment
• Technical Committee: CEN/TC 136 - Sports, playground and other recreational equipment
• Drafting Committee: CEN/TC 136/WG 13 - Floating leisure articles for use on water
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 11-Oct-2017
• Due Date: 16-Nov-2017
• Completion Date: 11-Oct-2017
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Mandate: M/372 - Standardisation mandate to CEN relating to floating leisure products for use on or in the water
• Ref Project: SIST EN ISO 25649-7:2017 - Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25469-7:2017)

Relations

• Replaces: EN 15649-7:2009 - Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices
• Effective Date: 18-Oct-2017
• Revised: FprEN ISO 25649-7 - Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for Class E devices (ISO/FDIS 25649-7:2024)
• Effective Date: 16-Oct-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2017
1DGRPHãþD
SIST EN 15649-7:2010
3ODYDMRþLSULSRPRþNL]DSURVWLþDVNLVHXSRUDEOMDMRQDYRGLLQYQMHMGHO
'RGDWQHSRVHEQHYDUQRVWQH]DKWHYHLQSUHVNXVQHPHWRGH]DSULSRPRþNHUD]UHGD
(,62
Floating leisure articles for use on and in the water - Part 7: Additional specific safety
requirements and test methods for class E devices (ISO 25469-7:2017)
Schwimmende Freizeitartikel zum Gebrauch auf und im Wasser - Teil 7: Zusätzliche
besondere sicherheitstechnische Anforderungen und Prüfverfahren für Artikel der Klasse
E (ISO 25469-7:2017)
Articles de loisirs flottants à utiliser sur ou dans l'eau - Partie 7: Exigences de sécurité et
méthodes d'essai complémentaires propres aux dispositifs de Classe E (ISO 25469-
7:2017)
Ta slovenski standard je istoveten z: EN ISO 25649-7:2017
ICS:
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 25649-7
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2017
EUROPÄISCHE NORM
ICS 97.220.40 Supersedes EN 15649-7:2009
English Version
Floating leisure articles for use on and in the water - Part
7: Additional specific safety requirements and test
methods for class E devices (ISO 25469-7:2017)
Articles de loisirs flottants à utiliser sur ou dans l'eau - Schwimmende Freizeitartikel zum Gebrauch auf und
Partie 7: Exigences de sécurité et méthodes d'essai im Wasser - Teil 7: Teil 7: Zusätzliche besondere
complémentaires propres aux dispositifs de Classe E sicherheitstechnische Anforderungen und
(ISO 25469-7:2017) Prüfverfahren für Artikel der Klasse E (ISO 25469-
7:2017)
This European Standard was approved by CEN on 24 June 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 25649-7:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 25649-7:2017) has been prepared by Technical Committee ISO/TC 83 “Sports
and other recreational facilities and equipment” in collaboration with Technical Committee
CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2018, and conflicting national standards shall be
withdrawn at the latest by April 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 15649-7:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 25649-7:2017 has been approved by CEN as EN ISO 25649-7:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 25649-7
First edition
2017-08
Floating leisure articles for use on and
in the water —
Part 7:
Additional specific safety
requirements and test methods for
Class E devices
Articles de loisirs flottants à utiliser sur ou dans l'eau —
Partie 7: Exigences de sécurité et méthodes d'essai complémentaires
propres aux dispositifs de Classe E
Reference number
ISO 25649-7:2017(E)
©
ISO 2017
ISO 25649-7:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 25649-7:2017(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Materials . 3
5 Construction and functional components of boats . 3
5.1 Conditioning . 3
5.2 Hull integrity . 3
5.2.1 Requirements . 3
5.2.2 Test method . 3
5.3 Manual lifting and carrying devices . 4
5.3.1 Requirements . 4
5.3.2 Test method . 4
5.4 Rowlocks and oars . 4
5.4.1 Requirements . 4
5.4.2 Test methods . 4
5.5 Hull drainage . 5
5.6 Towing device . 5
5.7 Seating and attachment systems (where offered as standard or optional equipment). 5
6 Safety requirements and test methods . 5
6.1 Minimum area and maximum permissible number of persons . 5
6.1.1 Requirement . 5
6.1.2 Testing . 5
6.2 Static stability of the boat . 6
6.2.1 Requirement . 6
6.2.2 Test method . 6
6.3 Dimensional stability when getting on and off the boat . 7
6.3.1 Requirement . 7
6.3.2 Testing . 8
6.4 Maximum load capacity . 8
6.4.1 Requirement . 8
6.4.2 Testing . 8
6.5 Safety ropes and grab handles . 8
6.5.1 Requirement . 8
6.5.2 Test method . 8
6.6 Residual buoyancy specific for boats . 9
6.6.1 Requirement . 9
6.6.2 Test method . 9
6.7 Manoeuvrability . 9
6.7.1 Requirement . 9
6.7.2 Test method .
...