Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008)

ISO 26424:2008 specifies a method for measuring the abrasive wear rate of ceramic coatings by means of a micro-scale abrasion wear test based on the well-known crater-grinding technique used for coating thickness determination in ISO 26423.
The method can provide data on both coating and substrate wear rates, either by performing two separate tests or by careful analysis of the data from a single test series.
The method can be applied to samples with planar or non-planar surfaces, but the results analysis described in the text applies only to flat samples. For non-planar samples, a more complicated analysis, possibly requiring the use of numerical methods, is required.

Hochleistungskeramik - Bestimmung der Beständigkeit gegen Abrieb von Schichten durch eine Mikroabriebprüfung (ISO 26424:2008)

Diese Internationale Norm legt ein Verfahren zur Messung der Abriebverschleißrate keramischer Schichten mithilfe einer Mikroabriebprüfung fest, die auf dem bekannten Kalottenschleifverfahren zur Bestimmung der Schichtdicke nach ISO 26423 [11] basiert.
Nach diesem Verfahren können Daten zur Bestimmung der Abriebverschleißraten sowohl der Schicht als auch des Grundwerkstoffes ermittelt werden, entweder durch zwei separate Prüfungen oder aber durch eine sorgfältige Analyse der aus einer einzigen Prüfserie gewonnenen Daten.
Das Prüfverfahren kann bei Proben mit ebenen oder nicht ebenen Oberflächen angewendet werden, während die in Abschnitt 9 beschriebene Auswertung nur für ebene Proben gilt. Bei nicht ebenen Proben ist eine komplexere Auswertung erforderlich, möglicherweise mithilfe numerischer Verfahren.

Céramiques techniques - Détermination de la résistance à l'abrasion des revêtements par essai d'abrasion à micro-échelle (ISO 26424:2008)

L'ISO 26424:2008 traite d'une méthode permettant de mesurer le taux d'usure par abrasion des revêtements céramiques au moyen d'un essai de micro-usure par abrasion basé sur la technique bien connue d'abrasion d'une calotte sphérique utilisée pour déterminer l'épaisseur du revêtement dans l'ISO 26423 [11].
Cette méthode permet d'obtenir des données relatives aux taux d'usure du revêtement et du substrat, que ce soit en réalisant deux types d'essai différents ou en analysant minutieusement les données issues d'une série d'essais d'un seul type.
Cette méthode peut s'appliquer aux échantillons disposant de surfaces planes ou non planes, mais l'analyse des résultats décrite à l'Article 9 ne peut être utilisée que pour les échantillons plats. En ce qui concerne les échantillons non plats, il y a lieu de procéder à une analyse plus complexe, nécessitant éventuellement l'application de méthodes numériques.

Fina keramika (sodobna keramika, sodobna tehnična keramika) - Ugotavljanje odpornosti prevlek proti obrabi z mikroabrazivnim preskusom (ISO 26424:2008)

Ta mednarodni standard določa metodo za merjenje stopnje abrazivne obrabe keramičnih prevlek z mikroabrazivnim preskusom na podlagi uveljavljene tehnike čelnega brušenja, ki se uporablja za ugotavljanje debeline prevleke v standardu ISO 26423[11]. Metoda lahko zagotovi podatke o stopnji obrabe prevleke in substrata, tako da se izvedeta dva ločena preskusa, ali s skrbno analizo podatkov iz enega preskusnega niza. Metodo je mogoče uporabiti za vzorce z ravnimi ali neravnimi površinami, vendar pa se rezultati analize, opisani v točki 9, uporabljajo samo za ploske vzorce. Pri neravnih vzorcih je potrebna bolj zapletena analiza, ki morda zahteva uporabo številskih metod.

General Information

Status
Published
Publication Date
19-Apr-2016
Withdrawal Date
30-Oct-2016
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Apr-2016
Due Date
22-Nov-2016
Completion Date
20-Apr-2016

Relations

Buy Standard

Standard
EN ISO 26424:2016
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN ISO 26424:2015
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 26424:2016
01-junij-2016
1DGRPHãþD
SIST EN 1071-6:2009
)LQDNHUDPLND VRGREQDNHUDPLNDVRGREQDWHKQLþQDNHUDPLND 8JRWDYOMDQMH
RGSRUQRVWLSUHYOHNSURWLREUDEL]PLNURDEUD]LYQLPSUHVNXVRP ,62
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the
abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008)
Hochleistungskeramik - Bestimmung der Beständigkeit gegen Abrieb von Schichten
durch eine Mikroabriebprüfung (ISO 26424:2008)
Céramiques techniques - Détermination de la résistance à l'abrasion des revêtements
par essai d'abrasion à micro-échelle (ISO 26424:2008)
Ta slovenski standard je istoveten z: EN ISO 26424:2016
ICS:
25.220.99 Druge obdelave in prevleke Other treatments and
coatings
81.060.30 Sodobna keramika Advanced ceramics
SIST EN ISO 26424:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 26424:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 26424:2016


EN ISO 26424
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2016
EUROPÄISCHE NORM
ICS 81.060.30 Supersedes EN 1071-6:2007
English Version

Fine ceramics (advanced ceramics, advanced technical
ceramics) - Determination of the abrasion resistance of
coatings by a micro-scale abrasion test (ISO 26424:2008)
Céramiques techniques - Détermination de la Hochleistungskeramik - Bestimmung der Beständigkeit
résistance à l'abrasion des revêtements par essai gegen Abrieb von Schichten durch eine
d'abrasion à micro-échelle (ISO 26424:2008) Mikroabriebprüfung (ISO 26424:2008)
This European Standard was approved by CEN on 18 March 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 26424:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 26424:2016
EN ISO 26424:2016 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 26424:2016
EN ISO 26424:2016 (E)
European foreword
The text of ISO 26424:2008 has been prepared by Technical Committee ISO/TC 206 “Fine ceramics” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 26424:2016
by Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall
be withdrawn at the latest by October 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 1071-6:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WDYOMDQMHHochleistungskeramik - Bestimmung der Beständigkeit gegen Abrieb von Schichten durch eine Mikroabriebprüfung (ISO 26424:2008)Céramiques techniques - Détermination de la résistance à l'abrasion des revêtements par essai d'abrasion à micro-échelle (ISO 26424:2008)Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008)81.060.30Sodobna keramikaAdvanced ceramics25.220.99Druge obdelave in prevlekeOther treatments and coatingsICS:Ta slovenski standard je istoveten z:FprEN ISO 26424 revkSIST FprEN ISO 26424:2015en01-november-2015kSIST FprEN ISO 26424:2015SLOVENSKI
STANDARD



kSIST FprEN ISO 26424:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN ISO 26424 rev
September 2015 ICS 81.060.30 Will supersede EN 1071-6:2007English Version
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008)
Céramiques techniques - Détermination de la résistance à l'abrasion des revêtements par essai d'abrasion à micro-échelle (ISO 26424:2008)
Hochleistungskeramik - Bestimmung der Beständigkeit gegen Abrieb von Schichten durch eine Mikroabriebprüfung (ISO 26424:2008) This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 184.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN ISO 26424 rev:2015 EkSIST FprEN ISO 26424:2015



FprEN ISO 26424:2015 (E) 2 Contents Page European foreword .3
kSIST FprEN ISO 26424:2015



FprEN ISO 26424:2015 (E) 3 European foreword The text of ISO 26424:2008 has been prepared by Technical Committee ISO/TC 206 “Fine ceramics” of the International Organization for Standardization (ISO) and has been taken over as FprEN ISO 26424:2015 by Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by DIN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 1071-6:2007. Endorsement notice The text of ISO 26424:2008 has been approved by CEN as FprEN ISO 26424-1:2015 without any modification. kSIST FprEN ISO 26424:2015



kSIST FprEN ISO 26424:2015



Reference numberISO 26424:2008(E)© ISO 2008
INTERNATIONAL STANDARD ISO26424First edition2008-11-01Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the abrasion resistance of coatings by a micro-scale abrasion test Céramiques techniques — Détermination de la résistance à l'abrasion des revêtements par essai d'abrasion à micro-échelle
kSIST FprEN ISO 26424:2015



ISO 26424:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trad
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.