prEN 480-6
(Main)Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
This document specifies a method for identifying an admixture by infrared analysis (IR).
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 6: Infrarot-Untersuchung
Dieses Dokument legt ein Verfahren zur Erkennung und Bestimmung eines Zusatzmittels durch Infrarot-Untersuchung (IR) fest.
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 6 : Analyse infrarouge
Le présent document spécifie une méthode d'identification d'un adjuvant par analyse infrarouge (IR).
Kemijski dodatki za beton, malto in injekcijsko maso - Preskusne metode - 6. del: Infrardeča analiza
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 480-6:2023
01-marec-2023
Kemijski dodatki za beton, malto in injekcijsko maso - Preskusne metode - 6. del:
Infrardeča analiza
Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 6: Infrarot-
Untersuchung
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 6 : Analyse infrarouge
Ta slovenski standard je istoveten z: prEN 480-6
ICS:
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
91.100.30 Beton in betonski izdelki Concrete and concrete
products
oSIST prEN 480-6:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 480-6:2023
---------------------- Page: 2 ----------------------
oSIST prEN 480-6:2023
DRAFT
EUROPEAN STANDARD
prEN 480-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2023
ICS 91.100.10; 91.100.30 Will supersede EN 480-6:2005
English Version
Admixtures for concrete, mortar and grout - Test methods
- Part 6: Infrared analysis
Adjuvants pour béton, mortier et coulis - Méthodes Zusatzmittel für Beton, Mörtel und Einpressmörtel -
d'essai - Partie 6: Analyse infrarouge Prüfverfahren - Teil 6: Infrarot-Untersuchung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 104.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 480-6:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 480-6:2023
prEN 480-6:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Procedure . 4
6.1 Preparation of the dry material. 4
6.2 Infrared spectrophotometry. 5
7 Results . 5
8 Test report .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.