iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12560-2:2001

(Main)

Flanges and their joints - Gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges

Flanges and their joints - Gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges

This standard specifies the dimensions, types, design, materials and marking requirements of spiral wound gaskets for use in conjunction with flat face or raised face flanges complying with EN 1759-1 for Class designations 150, 300, 600, 900 and 1500 for sizes up to and including NPS 24 (DN600), and for Class designation 2500 up to and including NPS 12 (DN300).

Flansche und ihre Verbindungen - Dichtungen für Flansche mit Class-Bezeichnung - Teil 2: Spiraldichtungen für Stahlflansche

Diese Norm legt die Masse und Kennzeichnung von Spiraldichtungen für Flansche mit glatter Dichtfläche (ohne Dichtleiste) und Flansche mit Dichtleiste, nach prEN 1759-1 fest für Class 150, 300, 600, 900, 1500 bis NPS und für Class 1500 bis NPS 12.

Brides et leurs assemblages - Joints pour les brides désignées Class - Partie 2: Joints spiralés pour utilisation avec des brides en acier

La présente norme prescrit les dimendions et le marquage des joints spiralés utilisés conjointement avec les brides à portée de joints plates et surélevées conformes à la norme EN 1759-1, pour les désignations Class 150, Class 300, Class 600, Class 900 et Class 1500, pour les dimensions NPS jusqu'à et y compris24, et pour la désignation Class 2500, jusqu'à et y compris NPS 12.

Prirobnice in prirobnični spoji - Tesnila za prirobnice z oznako Class - 2. del: Spiralna tesnila za jeklene prirobnice

General Information

Status
Withdrawn
Publication Date
23-Jan-2001
Withdrawal Date
24-Sep-2013
ICS
23.040.80 - Seals for pipe and hose assemblies
Technical Committee
CEN/TC 74 - Flanges and their joints
Drafting Committee
CEN/TC 74/WG 8 - Gaskets
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
25-Sep-2013
Completion Date
25-Sep-2013
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 12560-2:2002 - Flanges and their joints - Gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges

Relations

Replaced By
EN 12560-2:2013 - Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
Effective Date
08-Jun-2022

Buy Standard

EN 12560-2:2002EN 12560-2:2002
PreviousNext
Standard
EN 12560-2:2002
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Flansche und ihre Verbindungen - Dichtungen für Flansche mit Class-Bezeichnung - Teil 2: Spiraldichtungen für StahlflanscheBrides et leurs assemblages - Joints pour les brides désignées Class - Partie 2: Joints spiralés pour utilisation avec des brides en acierFlanges and their joints - Gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges23.040.80Tesnila za cevne zvezeSeals for pipe and hose assemblies23.040.60Prirobnice, oglavki in spojni elementiFlang
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1514-1:2024(Main)
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
SIST EN 1514-1:2024

This document specifies non-metallic flat gaskets, with or without inserts, for use with flanges in accordance with EN 1092-1, EN 1092-2, EN 1092-3 and EN 1092-4, and pipes and fittings in accordance with EN 545, EN 598, and EN 969, for pressure application up to and including PN 63 values and dimensions up to and including DN 4000. In addition, this document also gives guidance on typical materials used and how they should be marked.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12560-1:2024(Main)
Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
SIST EN 12560-1:2024

This document specifies the dimensions, types, designation and marking of non-metallic flat gaskets, with or without inserts, for flanges in accordance with EN 1759-1, EN 1759-3 and EN 1759-4, for Class 150, Class 300, Class 600 and Class 900 for nominal sizes DN 15 to DN 600. In addition, this document also gives guidance on typical materials used and how they should be marked.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13555:2021(Main)
Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
SIST EN 13555:2021

This document specifies the gasket parameters required by EN 1591-1 and provides the test procedures for establishing the values of these parameters.
Gaskets which are wholly based upon elastomers, or based upon elastomers with only the inclusion of particulate fillers or particulate reinforcement, as opposed to gaskets combining elastomers, fillers and fibrous reinforcement, are beyond the scope of this document.
NOTE The testing procedures given might be applicable to gaskets of other shapes and dimensions.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1514-2:2014+A1:2021(Main + Amendment)
Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
SIST EN 1514-2:2014+A1:2021

This part of EN 1514 specifies the dimensions and marking of spiral wound gaskets for use in conjunction with flat face and raised face flanges complying with the requirements of EN 1092-1 for PN 10, PN 16, PN 25, PN 40, PN 63, PN 100 and PN 160 and up to and including DN 1 000.
NOTE 1   Dimensions of other types of gaskets for use with flanges to EN 1092-1, EN 1092-2, EN 1092-3 and EN 1092 4 are given in EN 1514-1, EN 1514-3, EN 1514-4, EN 1514-6, EN 1514-7 and EN 1514-8.
NOTE 2   Annex A lists information to be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the manufacturer.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14772:2021(Main)
Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560
SIST EN 14772:2021

This document specifies the quality assurance procedures that are applicable to ensure that delivered gaskets comply with the relevant product standards. This document sets down procedures by which a user can have confidence that the salient features of each batch of gaskets or gasket materials delivered to them will be constant.
The gasket types covered by this document are those that are within the scope of the EN 1514 series and EN 12560 series and are simultaneously within the scope of the EN 1591 series. An exception is those gaskets intended solely for domestic fluids (like water, waste water ...) which are based on rubber with or without reinforcement like fillers and/or inserts.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12560-2:2013(Main)
Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
SIST EN 12560-2:2013

This European Standard specifies the dimensions, design, types, designation, materials and marking of spiral wound gaskets for use with type A flat face or type B raised face flange facings complying with EN 1759-1 for the following Class designations:
-   Class 150, to Class 1 500 for nominal sizes DN 15 to DN 600, and
-   Class designation 2 500 up to and including DN 300.
The centering rings for the spiral wound gaskets according to this standard are sized for use with imperial bolting.
The dimensions of spiral wound gaskets for tongue and groove flange facing types and spigot and recess flange facing types to EN 1759-1 are not included in this standard.
Such gaskets may be available, however, for these types of flange and the purchaser is advised to consult the manufacturer as to their availability. Similarly, for slip-on or screwed flange types, the manufacturer should be consulted about availability.
NOTE   Dimensions of other types of gasket for use with flanges complying with the requirements of EN 1759-1 are given in EN 12560-1, EN 12560-3, EN 12560-4 and EN 12560-5, EN 12560-6 and EN 12560-7.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1514-8:2004(Main)
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges
SIST EN 1514-8:2005

This document specifies the dimensions of polymeric O-Ring gaskets for use with grooved flanges complying with EN 1092 for PN 10, PN 16, PN 25, PN 40.
NOTE 1   Dimensions of other types of gaskets for use with flanges to EN 1092 1, EN 1092 2, EN 1092 3 and EN 1092 4 are given in EN 1514 1, EN 1514 2, EN 1514 3, EN 1514 4, EN 1514-6 and EN 1514-7
NOTE 2   Annex A lists information that should be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the supplier.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12560-7:2004(Main)
Flanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges
SIST EN 12560-7:2004

This European Standard specifies the construction, dimensions and marking of covered serrated metal jacketed gaskets for use with flanges complying with prEN 1759 1 for Class 150, Class 300, Class 600, Class 900. Class 1 500 for sizes up to and including NPS 24, and for Class designation 2 500 up to and including NPS 12.
This European Standard does not extend to covered metal jacketed based heat exchanger gaskets with pass bars or large vessel gaskets but, in the lack of a dedicated document for such gaskets, the principles set down may be applied to them.
NOTE 1   Dimensions of other types of gaskets for use with flanges to prEN 1759 1, EN 1759 3 and EN 1759 4 are given in EN 12560 1, EN 12560 2, EN 12560 3, EN 12560 4, EN 12560 5 and EN 12560 6.
NOTE 2   Annex A lists information that should be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the supplier.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1514-7:2004(Main)
Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges
SIST EN 1514-7:2004

This European Standard specifies the construction, dimensions and marking of covered serrated metal jacketed gaskets for use with flanges complying with EN 1092-1 for PN 2,5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63 and PN 100 up to and including DN 900.
This European Standard does not extend to covered metal jacketed based heat exchanger gaskets with pass bars or large vessel gaskets but, in the lack of a dedicated document for such gaskets, the principles set down may be applied to them.
NOTE 1   Dimensions of other types of gaskets for use with flanges to EN 1092-1, EN 1092-2, EN 1092-3 and EN 1092-4 are given in EN 1514-1, EN 1514-2, EN 1514-3, EN 1514-4, EN 1514-6 and prEN 1514-8.
NOTE 2   Annex A lists information that should be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the supplier.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12560-6:2003(Main)
Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
SIST EN 12560-6:2004

This European Standard specifies the construction, dimensions and marking of covered serrated metal gaskets for use with flanges complying with prEN 1759-1 for Class 150, Class 300, Class 600, Class 900, Class 1500 and Class 2500 up to and including NPS 24.
This document does not extend to serrated covered metal based heat exchanger gaskets with pass bars or large vessel gaskets but, in the lack of a dedicated document for such gaskets, the principles set down can be applied to them.
NOTE 1   Dimensions of other types of gaskets for use with flanges to prEN 1759-1, prEN 1759-3 and prEN 1759-4 are given in EN 12560-1, EN 12560-2, EN 12560-3, EN 12560-4, EN 12560- 5 and prEN 12560-7.
NOTE 2   Annex A lists information that should be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the supplier.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day