EN ISO 2010:1994

Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994)

Specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.

Linsen-Senkschrauben mit Schlitz (Einheitskopf) - Produktklasse A (ISO 2010:1994)

Diese Norm enthält Festlegungen über Linsen-Senkschrauben mit Schlitz, in Produktklasse A, mit Gewinde von M 1,6 bis M 10. Werden in besonderen Fällen andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt, so sind diese den bestehenden Internationalen Normen zu entnehmen, z. B. ISO 262, ISO 888, ISO 898-1, ISO 965-2, ISO 3506.

Vis à métaux à tête fraisée bombée, fendue - Grade A (ISO 2010:1994)

La présente Norme internationale prescrit les caractéristiques des vis à métaux à tête fraisée bombée fendue, de filetage M1,6 à M10 inclus et de grade A. Si dans des cas particuliers, des spécifications autres que celles figurant dans la présente Norme internationale sont requises, il est recommandé de les prendre dans les Normes internationales existantes, par exemple ISO 261, ISO 888, ISO 898-1, ISO 965-2 et ISO 3506.

Vijaki z zarezano lečasto ugrezno glavo - Razred izdelave A

General Information

• Status: Withdrawn
• Publication Date: 30-Jul-1994
• Withdrawal Date: 31-Aug-2011
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Sep-2011
• Completion Date: 01-Sep-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 2010:1996 - Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994)

Relations

• Replaced By: EN ISO 2010:2011 - Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
• Effective Date: 18-Sep-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2010:1996
01-april-1996
9LMDNL]]DUH]DQROHþDVWRXJUH]QRJODYR5D]UHGL]GHODYH$
Slotted raised countersunk head screws (common head style) - Product grade A (ISO
2010:1994)
Linsen-Senkschrauben mit Schlitz (Einheitskopf) - Produktklasse A (ISO 2010:1994)
Vis a métaux a tete fraisée bombée, fendue - Grade A (ISO 2010:1994)
Ta slovenski standard je istoveten z: EN ISO 2010:1994
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 2010:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2010:1996

---------------------- Page: 2 ----------------------

SIST EN ISO 2010:1996

------
...