Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 001: Installation and removal procedure

This European Standard specifies the installation and removal procedure (hole profile, tools) of self-locking, self broaching key, UNJ thread inserts defined by EN standards, for aerospace applications.

Luft- und Raumfahrt - Gewindeeinsätze, UNJ-Gewinden, selbstsichernd, mit selbsträumenden Stiften - Teil 001: Ein- und Ausbauverfahren

Diese Norm legt das Ein- und Ausbauverfahren (Lochprofil, Werkzeuge) von selbstsichernden Gewindeeinsätzen
mit UNJ-Gewinden und mit selbsträumenden Stiften nach EN-Normen zur Verwendung in der
Luft-und Raumfahrt fest.

Série aérospatiale - Douilles filetées, à filetage UNJ, à freinage interne, à clavettes auto-brochantes - Partie 001: Procédure d'installation et d'extraction

Aeronavtika - Vložki, navoj UNJ, samozapiralni, s samozagozdnim ključem - 001. del: Postopek namestitve in odstranitve

Ta standard določa postopek namestitve in odstranitve (profili lukenj, orodja) samozapiralnega samozagozdnega ključa in vložkov z navojem MJ, opredeljenih z EN standardi, za uporabo v aeronavtiki.

General Information

Status
Published
Publication Date
17-Aug-2010
Withdrawal Date
27-Feb-2011
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-Aug-2010
Completion Date
18-Aug-2010

Buy Standard

Standard
EN 4673-001:2010
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Gewindeeinsätze, UNJ-Gewinden, selbstsichernd, mit selbsträumenden Stiften - Teil 001: Ein- und AusbauverfahrenSérie aérospatiale - Douilles filetées, à filetage UNJ, à freinage interne, à clavettes auto-brochantes - Partie 001 : Procédure d'installation et d'extractionAerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 001: Installation and removal procedure49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 4673-001:2010SIST EN 4673-001:2010en01-oktober-2010SIST EN 4673-001:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4673-001
August 2010 ICS 49.030.30 English Version
Aerospace series - Inserts, UNJ threads, self-locking, with self-broaching keys - Part 001: Installation and removal procedure
Série aérospatiale - Douilles filetées, à filetage UNJ, à freinage interne, à clavettes auto-brochantes - Partie 001: Procédure d'installation et d'extraction
Luft- und Raumfahrt - Gewindeeinsätze, UNJ-Gewinden, selbstsichernd, mit selbsträumenden Stiften - Teil 001: Ein-und Ausbauverfahren This European Standard was approved by CEN on 12 June 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4673-001:2010: ESIST EN 4673-001:2010

EN 4673-004, Aerospace series — Inserts, UNJ threads, self-locking, with self-broaching keys — Part 004: In heat resisting nickel base alloy Ni-P100HT (Inconel 718), silver plating EN 4673-005, Aerospace series — Inserts, UNJ threads, self-locking, with self-broaching keys — Part 005: In heat resisting nickel base alloy Ni-P101HT (WASPALOY), silver plating
EN 4673-006, Aerospace series — Inserts, UNJ threads, self-locking, with self-broaching keys — Part 006: In heat resisting steel FE-PA2601 (A286), MoS2 coated ISO 3161, Aerospace series — UNJ threads — General requirements and limit dimensions 3 Insert information Tables 1 to 3 provide the cross reference between the insert codification, the related bolt thread and the tapped hole diameter. SIST EN 4673-001:2010

Tapped hole diameter a
Tapped hole reference a
EN 4673-004-3-0 EN 4673-005-3-0 EN 4673-006-3-0 .190 0-32UNJF .312 5-18UNJC-3B EN 4673-002-3-0 EN 4673-004-4-0 EN 4673-005-4-0 EN 4673-006-4-0 .250 0-28UNJF .375 0-16UNJFC-3B EN 4673-002-4-0 EN 4673-004-5-0 EN 4673-005-5-0 EN 4673-006-5-0 .312 5-24UNJF .437 5-16UNJ-3B EN 4673-002-5-0 EN 4673-004-6-0 EN 4673-005-6-0 EN 4673-006-6-0 .375 0-24UNJF .500 0-16UNJ-3B EN 4673-002-6-0 EN 4673-004-7-0 EN 4673-005-7-0 EN 4673-006-7-0 .437 5-20UNJF .562 5-16UNJ-3B EN 4673-002-7-0 EN 4673-004-8-0 EN 4673-005-8-0 EN 4673-006-8-0 .500 0-20UNJF .625 0-16UNJ-3B EN 4673-002-8-0 a According to ISO 3161.
Table 2 — First repair size insert Insert reference Bolt thread diameter a
Tapped hole diameter a
Tapped hole reference a
EN 4673-004-3-1 EN 4673-005-3-1 EN 4673-006-3-1 .190 0-32UNJF .375 0-16UNJC-3B EN 4673-002-3-1 EN 4673-004-4-1 EN 4673-005-4-1 EN 4673-006-4-1 .250 0-28UNJF .437 5-16UNJ-3B EN 4673-002-4-1 EN 4
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.